1. DL manuals
  2. Vecow
  3. Server
  4. ECS-9101
  5. User Manual

Vecow ECS-9101 User Manual

Manual is about: Fanless Embedded System ECS-9200 series; ECS-9100 series

Summary of ECS-9101

  • Page 1

    User manual user manual 1.1.0 edition 20170509 ecs-9200/9100 quad core intel ® xeon ® / core ™ i7/ i5/ i3 fanless embedded system high performance, rugged, expandable, -40°c to 75°c extended temp.

  • Page 2: Record of Revision

    Ii version date page description remark 1.0 03/24/2017 all official release 1.1 05/09/2017 92 update record of revision.

  • Page 3: Fcc

    Iii this manual is released by vecow co., ltd. For reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential da...

  • Page 4: Order Information

    Iv part number description ecs-9210m ecs-9200, 6 gige lan w/4 m12 poe + , 2 ssd tray, 1 pcie x16, 8 usb 3.0, 4 com, 3 sim, 32 isolated dio ecs-9210 ecs-9200, 6 gige lan w/4 poe + , 2 ssd tray, 1 pcie x16, 8 usb 3.0, 4 com, 3 sim, 32 isolated dio ecs-9201m ecs-9200, 6 gige lan w/4 m12 poe + , 2 ssd t...

  • Page 5

    V part number description i5-7500 7th gen intel ® core™ i5-7500 processor (6m cache, up to 3.80 ghz, 65w) i5-7500t 7th gen intel ® core™ i5-7500t processor (6m cache, up to 3.30 ghz, 35w) i5-6500 6th gen intel ® core™ i5-6500 processor (6m cache, up to 3.60 ghz) i5-6500te 6th gen intel ® core™ i5-65...

  • Page 6: Table of Contents

    Vi table of contents chapter 1 general introduction 1 1.1 overview 1 1.2 features 2 1.3 product specification 2 1.3.1 specifications of ecs-9210m 2 1.3.2 specifications of ecs-9210 4 1.3.3 specifications of ecs-9201m 7 1.3.4 specifications of ecs-9201 9 1.3.5 specifications of ecs-9110 12 1.3.6 spec...

  • Page 7: Chapter   4

    Vii 3.3 installing ddr4 so-dimm modules 63 3.4 installing mini pcie card 64 3.5 installing cfast card 65 3.6 installing sim card 66 3.7 installing pci/ pcie card 67 3.8 installing ssd/ hdd 69 3.9 installing m.2 71 3.10 installing m2dom 72 3.11 mounting your ecs-9200/9100 74 chapter 4 bios setup 80 4...

  • Page 8: General Introduction

    1 general introduction 1 general introduction vecow ecs-9200/9100 series is a high-performance, all-in-one integrated, expandable fanless embedded workstation system. Lga1151 socket supports quad core 7th/6th generation intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) running with wo...

  • Page 9: 1.2   Features

    2 general introduction ©vecow ecs-9200/9100 user manual 1.2 features • lga 1151 socket supports quad core 7th/6th generation intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) with intel ® c236 chipset • fanless, -40°c to 75°c extended operating temperature • 2 ddr4 2133mhz memory, up ...

  • Page 10

    3 general introduction expansion mini pcie 3 full-size for pcie/usb/external sim card/msata pci/pcie 1 pcie x16 slot supports up to 160w power budget m.2 1 m.2 socket (key id : m) graphics graphics processor intel ® hd graphics 630/530 interface • dvi-i : up to 1920 x 1200 @ 60hz • dvi-d : up to 192...

  • Page 11

    4 general introduction ©vecow ecs-9200/9100 user manual others tpm optional infineon slb9665 supports tpm 2.0, lpc interface watchdog timer reset : 1 to 255 sec./min. Per step smart management wake on lan, pxe supported hw monitor monitoring temperature, voltages. Auto throttling control when cpu ov...

  • Page 12

    5 general introduction sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o interface serial 4 com rs-232/422/485 with auto flow control (esd 8kv) usb • 8 external usb 3.0 (4 front, 4 rear) • 1 usb 2.0 (internal) isolated dio 32 isolated dio (16 di, 16 do) led power, hdd, wi...

  • Page 13

    6 general introduction ©vecow ecs-9200/9100 user manual power input voltage 6v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground ignition control 16 mode (internal) remote switch 3-pin terminal block : on, off, ign surge protection up to 80v/1ms transient power others tpm opt...

  • Page 14

    7 general introduction 1.3.3 specifications of ecs-9201m system processor quad core 7th/6th intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o interface serial 4 com rs-232/422/4...

  • Page 15

    8 general introduction ©vecow ecs-9200/9100 user manual poe (m12) lan 3 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210, m12 connector lan 4 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210, m12 connector lan 5 gige ieee 802.3at (25.5w/48v) poe + by intel ® i210, m12 connector lan 6 gige ieee...

  • Page 16

    9 general introduction storage temperature -40°c to 85°c (-40°f to 185°f) humidity 5% to 95% humidity, non-condensing relative humidity 95% at 75°c shock • iec 60068-2-27 • ssd : 50g @ wallmount, half-sine, 11ms vibration • iec 60068-2-64 • ssd : 5grms, 5hz to 500hz, 3 axis emc ce, fcc, en50155, en5...

  • Page 17

    10 general introduction ©vecow ecs-9200/9100 user manual storage sata 2 sata iii (6gbps) support software raid 0, 1 msata 3 sata iii (mini pcie type, 6gbps) m2dom 1 pcie 3.0 (8gt/s) storage device • 1 cfast socket, push-in/push-out ejector • 2 front-access 2.5" ssd/hdd tray audio audio codec realtek...

  • Page 18

    11 general introduction mounting • wallmount by mounting bracket • din rail mount (optional) • 2u rackmount (optional) environment operating temperature 35w tdp cpu : • core™ i7, i5, i3 : -40°c to 75°c (-40°f to 167°f) • xeon ® e3-1268l v5 : -40°c to 70°c (-40°f to 158°f) 65w tdp cpu : • core™ i7, i...

  • Page 19

    12 general introduction ©vecow ecs-9200/9100 user manual 1.3.5 specifications of ecs-9110 system processor quad core 7th/6th intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o in...

  • Page 20

    13 general introduction power input voltage 6v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground ignition control 16 mode (internal) remote switch 3-pin terminal block : on, off, ign surge protection up to 80v/1ms transient power others tpm optional infineon slb9665 supports ...

  • Page 21

    14 general introduction ©vecow ecs-9200/9100 user manual 1.3.6 specifications of ecs-9101 system processor quad core 7th/6th intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 260-pin so-dimm socket i/o in...

  • Page 22

    15 general introduction power input voltage 6v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground ignition control 16 mode (internal) remote switch 3-pin terminal block : on, off, ign surge protection up to 80v/1ms transient power others tpm optional infineon slb9665 supports ...

  • Page 23: 1.4   Supported Cpu List

    16 general introduction ©vecow ecs-9200/9100 user manual 1.4 supported cpu list processor no. Tdp cache max. Frequency embedded xeon ® e3-1575m v5 45w 8m up to 3.00 ghz xeon ® e3-1545m v5 45w 8m up to 2.90 ghz xeon ® e3-1535m v5 45w 8m up to 2.80 ghz xeon ® e3-1515m v5 45w 8m up to 2.80 ghz xeon ® e...

  • Page 24: 1.5   Mechanical Dimension

    17 general introduction 1.5 mechanical dimension 1.5.1 dimensions of ecs-9210m 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3.1 1”) unit: mm (inch) 1.5.2 dimensions of ecs-9210 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3.1 1”) un...

  • Page 25

    18 general introduction ©vecow ecs-9200/9100 user manual 1.5.3 dimensions of ecs-9201m 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3.1 1”) unit: mm (inch) 1.5.4 dimensions of ecs-9201 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3....

  • Page 26

    19 general introduction 1.5.5 dimensions of ecs-9110 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3.1 1”) unit: mm (inch) 1.5.6 dimensions of ecs-9101 155.0 (6.10”) 215.0 (8.46”) 260.0 (10.24”) 282.0 (11.10”) 297.0 (11.69”) 79.1 (3.1 1”) unit: mm (inch).

  • Page 27: 2.1   Packing List

    20 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2 getting to know your ecs-9200/9100 2.1 packing list item description qty 1 ecs-9200/9100 expandable fanless embedded system (according to the configuration you order, the ecs-9200/9100 series may contain ssd/hdd and ddr4 so-dim...

  • Page 28

    21 getting to know your ecs-9200/9100 2.2 front panel i/o & functions in vecow ecs-9200/9100 series family, all i/o connectors are located on front panel and rear panel. Most of the general connections to computer device, such as usb, lan jack, audio, display port, dvi-i, dvi-d and any additional st...

  • Page 29

    22 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual pin no. Description pin no. Description s1 gnd pc6 nc s2 sata_txp4 pc7 gnd s3 sata_txn4 pc8 cfast_led s4 gnd pc9 nc s5 sata_rxn4 pc10 nc s6 sata_rxp4 pc11 nc s7 gnd pc12 nc 2.2.3 cfast card there is a cfast socket on the front pa...

  • Page 30

    23 getting to know your ecs-9200/9100 pin no. Description pin no. Description pc1 gnd pc13 +3.3v pc2 gnd pc14 +3.3v pc3 nc pc15 gnd pc4 nc pc16 gnd pc5 nc pc17 nc 2.2.4 pwr and hdd led indicator hdd led/yellow : a hard disk/ cfast led. If the led is on, it indicates that the system’s storage is func...

  • Page 31

    24 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual the dvi-d connector on the front panel supports dvi display. This connector can output dvi signal. The dvi output mode supports up to 1920 x 1200 resolution and output mode supports up to 1920 x 1200 resolution. The dvi is automa...

  • Page 32

    25 getting to know your ecs-9200/9100 2.2.8 usb 3.0 there are 4 usb 3.0 connections available supporting up to 5gb per second data rate in the front side of ecs-9200/9100. It is also compliant with the requirements of super speed (ss), high speed (hs), full speed (fs) and low speed (ls). Rst dp lan ...

  • Page 33

    26 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual there are 2 audio connectors, mic-in and line-out, in the front side of ecs-9200. Onboard realtek alc892 audio codec supports 5.1 channel hd audio and fully complies with intel ® high definition audio (azalia) specifications. 2.2...

  • Page 34

    27 getting to know your ecs-9200/9100 2.2.11 wlan led, mini pcie, sim card comparison rst dp lan 1 lan 2 dvi-d dvi-i cfast sim 2 sim 3 sim 1 1 2 3 wlan mini pcie sim led mini pcie 1 sim 1 (cn12) 1 mini pcie 2 sim 2 (cn13) 2 mini pcie 3 sim 3 (cn11) 3 mini pcie slot/sim slot/wlan led mapping table : ...

  • Page 35

    28 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.2.12 ssd/ hdd tray there are 2 front-access 2.5” ssd/ hdd trays in the front side of ecs- 9200/9100. Just trigger to open the ssd/ hdd tray, up to 4tb is available. Rst dp lan 1 lan 2 dvi-d dvi-i cfast sim 2 sim 3 sim 1 1 2 3 w...

  • Page 37

    30 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual serial port pin no. Rs-232 rs-422 (5-wire) rs-422 (9-wire) rs-485 (3-wire) 1 to 4 1 dcd txd- txd- data- 2 rxd txd+ txd+ data+ 3 txd rxd+ rxd+ ----------- 4 dtr rxd- rxd- ----------- 5 gnd gnd gnd gnd 6 dsr ----------- rts- ------...

  • Page 38

    31 getting to know your ecs-9200/9100 2.3.4 rear usb 3.0 there are 4 usb 3.0 connections available supporting up to 5gb per second data rate in the rear side of ecs-9200/9100. It is also compliant with the requirements of super speed (ss), high speed (hs), full speed (fs) and low speed (ls). Com 1 c...

  • Page 39

    32 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual each lan port is supported by standard rj-45 connector with led indicators to present active/link/speed status of the connection & poe status led. The led indicator on the right bottom corner lightens in solid green when the cabl...

  • Page 41

    34 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual dio pin no. Definition function dio2 1 input 0 sio_gpi37 2 input 1 sio_gpi56 3 input 2 sio_gpi57 4 input 3 sio_gpi15 5 input 4 sio_gpi16 6 input 5 sio_gpi35 7 input 6 sio_gpi46 8 input 7 sio_gpi11 9 di2_com - 10 dio2_gnd - 11 out...

  • Page 43

    36 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.4 main board expansion connectors 2.4.1 inside view of ecs-9200/9100 main board with connector location sata2 sata1 cn15 fan2 jp10 cn3 cn6 cn18 jp1 jp3 battery bios cn10 jp5 jp6 jp9 j4 j2 j9 j8 j7 j6 jp4 sw2 cn25 cn9 j1 fan1 jp...

  • Page 44

    37 getting to know your ecs-9200/9100 2.4.2 ups power connector for ups module optional, we use 4.2mm 2x2p power connector. This system has a ups power input connector for optional part ups module. Pin no. Definition pin no. Definition 1 ground 2 ground 3 +vdc_in (6~36v, max.8a) 4 +vdc_in (6~36v, ma...

  • Page 45

    38 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual group pin no. Description hdd led 1 hdd_led_p 3 hdd_led_n reset button 5 fp_rst_btn_n 7 ground power led 2 pwr_led_p 4 pwr_led_n power button 6 fp_pwr_btn_in 8 ground 2.4.4 ddr4 slot there are 2 ddr4 channel onboard supporting dd...

  • Page 46

    39 getting to know your ecs-9200/9100 2.4.5 bios socket if the bios needs to be changed, please contact the vecow rma service team. 2.4.6 sata connector standard 7 pin sata connector there are 2 onboard high performance serial ata iii. It supports higher storage capacity with less cabling effort and...

  • Page 47

    40 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.4.7 sata power header standard, all form factor 1x4p power header there are 2 hdd power header on board and each power header supports two 2.5” sata hdd. Pin no. Description pin no. Description 1 +v5 (max. 4a) 2 ground 3 ground...

  • Page 48

    41 getting to know your ecs-9200/9100 pin no. Definition pin no. Definition 1 usb +vcc (+v5/max. 0.5a) 2 data- 3 data+ 4 ground 2.4.9 m2dom innodisk m2dom s20/s30 3me3 is a m.2 based disk module with vertical type form factor. Its mechanical design can help board maker to release up to 90% space of ...

  • Page 49

    42 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual pin no. Function pin no. Function 75 gnd 73 gnd 74 +3.3v 71 gnd 72 +3.3v 69 pedet (nc-pcie/gnd- sata) 70 +3.3v 67 n/c 68 n/c mechanical key 57 gnd 58 n/c 55 refclkp 56 n/c 53 refclkn 54 wake# 51 gnd 52 clkreq# 49 petp0 /sata-a+ 5...

  • Page 50

    43 getting to know your ecs-9200/9100 31 perp1 32 n/c 29 pern1 30 n/c 27 gnd 28 n/c 25 petp2 26 n/c 23 petn2 24 n/c 21 gnd 22 n/c 19 perp2 20 n/c 17 pern2 18 +3.3v 15 gnd 16 +3.3v 13 petp3 14 +3.3v 11 petn3 12 +3.3v 9 gnd 10 das/dss# (i/o)/led1# (i)(0/3.3v) 7 perp3 8 n/c 5 pern3 6 n/c 3 gnd 4 +3.3v ...

  • Page 51

    44 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual pin no. Function pin no. Function 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 46 reserved 43 gnd 44 reserved 41 +3.3vaux 42 reserved 39 +3.3vaux 40 gnd 37 gnd 38 usb_d+ 35 gnd 36 usb_d- 33 petp0 34...

  • Page 52

    45 getting to know your ecs-9200/9100 2.4.12 rtc battery the system’s real-time clock is powered by a lithium battery. It is equipped with panasonic br2032 190mah lithium battery. It is recommended that you do not have to get the lithium battery on your own. If the battery needs to be changed, pleas...

  • Page 53

    46 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual pin no. Function pin no. Function 1 serirq 7 lframe# 2 +3.3v 8 lad0 3 la3 9 n/c 4 reset# 10 ground 5 lad1 11 clock 6 lad2 12 ground pin out: 2.4.14 lpc port 80 header ecs-9200/9100 provides a lpc port 80 header for debug card. Cn...

  • Page 54

    47 getting to know your ecs-9200/9100 pin no. Function pin no. Function 1 spd0 2 spd1 3 spd2 4 spd3 5 ground 6 ground pin out: 2.4.16 com port header ecs-9200/9100 provides 4 com port headers for internal com port cable. Pin no. Description port 1 ground_frame com3 2 ground com3 3 ri com3 4 dtr com3...

  • Page 55

    48 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.5 main board jumper & deep switch settings 2.5.1 top view of ecs-9200/9100 with jumper and dip switch the figure below is the top view of ecs-9200/9100 main board which is the main board. It shows the location of the jumpers an...

  • Page 56

    49 getting to know your ecs-9200/9100 you may configure your card to match the needs of your application by dip switch. As below show the dip switch on and off. On 1 2 1 : off 2 : off on 1 2 1 : on 2 : off on 1 2 1 : on 2 : on 2.5.2 usb power jumper jumper setting function jp9 1:2 supported wake up(...

  • Page 57

    50 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.5.3 com port ri pin select pin header pin no. Description com1 jp3 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) 5-6 ri (default) pin header pin no. Description com2 jp4 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) 5-6 ri (default) pin head...

  • Page 58

    51 getting to know your ecs-9200/9100 2.5.4 poe power on select jumper setting function jp10 1:2 poe power on at standby power ready jp10 2:3 poe power on after system power on (default) jp10 2.5.6 clear cmos/me switch jumper setting function jp1 1:2 *normal(default) jp1 2:3 clear cmos jumper settin...

  • Page 59: 2.6   Ignition Control

    52 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.6 ignition control 2.6.1 adjust ignition control modes ecs-9200/9100 series provides ignition power control feature for in-vehicle applications. The built-in mcu monitors the ignition signal and turns on/off the system accordin...

  • Page 60

    53 getting to know your ecs-9200/9100 the modes are listed in the following table: item power on delay power off delay switch position 0 atx mode 1 no delay no delay 2 no delay 5 seconds 3 no delay 10 seconds 4 no delay 20 seconds 5 5 seconds 30 seconds 6 5 seconds 60 seconds 7 5 seconds 90 seconds ...

  • Page 61

    54 getting to know your ecs-9200/9100 ©vecow ecs-9200/9100 user manual 2.6.2 ignition control wiring to activate ignition control, you need to provide ign signal via the 3-pin pluggable terminal block located in the back panel. It is below the general wiring configuration. For testing purpose, you c...

  • Page 62

    55 hardware installation 2.6.3 smart battery protection the system with “ignition control” can perform smart battery protection, namely low battery detection. When the system is running on a battery and its voltage drops below the threshold, the system will automatically shut down. The low battery d...

  • Page 63: System Setup

    56 hardware installation ©vecow ecs-9200/9100 user manual system setup 3.1 how to open your ecs-9200/9100 3 step 1 remove hole plugs. Step 2 remove two f#6-32 screws (circled in red) and two f-m3 screws (circled in yellow) on the bottom side..

  • Page 64

    57 hardware installation step 3 finish step1 and 2. Step 4 remove one cover. Step 5 open the module..

  • Page 65

    58 hardware installation ©vecow ecs-9200/9100 user manual step 6 finish. Step 7 remove two f-#6-32 screws at bottom side. Step 8 remove one cover.Remove one screw khs-#6-32 and ssd/ hdd tray at front panel..

  • Page 66

    59 hardware installation step 9 remove ssd/hdd module. Step 10 be careful pull out sata(yellow) , power sata(blue) and com cable(red) . Step 11 remove four khs-#6-32 screws at rear panel..

  • Page 67: 3.2   Installing Cpu

    60 hardware installation ©vecow ecs-9200/9100 user manual step 12 finish. 3.2 installing cpu step 1 remove one f #6-32 and pick up chock bracket. Step 2 remove eight ph-m3 and four m3x11 spring screws and pick up mother board..

  • Page 68

    61 hardware installation step 4 open cpu slot. (be careful cpu pins) step 3 cpu slot..

  • Page 69

    62 hardware installation ©vecow ecs-9200/9100 user manual step 6 finish. Step 5 install cpu on the slot. Step 7 close cpu slot and finish..

  • Page 70

    63 hardware installation 3.3 installing ddr4 so-dimm modules step 1 install ddr4 ram module into so-dimm slot. Step 2 make sure the ram module is locked by the memory slot..

  • Page 71

    64 hardware installation ©vecow ecs-9200/9100 user manual 3.4 installing mini pcie card step 1 install mini pcie card into the mini pcie socket. Step 2 fasten one m2.5 screw..

  • Page 72: 3.5   Installing Cfast Card

    65 hardware installation 3.5 installing cfast card step 1 remove 2 pcs f-m3x4 screws on cfast & sim card. Step 2 before inserting cfast & sim card, make sure ecs-9200 power is not plugged. Step 3 insert cfast card and push to lock..

  • Page 73: 3.6   Installing Sim Card

    66 hardware installation ©vecow ecs-9200/9100 user manual 3.6 installing sim card step 1 remove two f-m3x4 screws on cfast & sim cover. Step 2 before inserting sim card, make sure the system power is not plugged. Step 3 insert sim card and push to lock..

  • Page 74

    67 hardware installation 3.7 installing pci/ pcie card step 2 remove the bracket. Step 1 remove the m3 screw..

  • Page 75

    68 hardware installation ©vecow ecs-9200/9100 user manual step 4 fasten m3 screw. Step 3 install pci/pcie card..

  • Page 76: 3.8   Installing Ssd/ Hdd

    69 hardware installation 3.8 installing ssd/ hdd step 1 trigger and open ssd/hdd tray. Step 2 insert 2.5” ssd/hdd in the tray and fasten two f-m3x4 screws..

  • Page 77

    70 hardware installation ©vecow ecs-9200/9100 user manual step 3 finish. Step 4 install ssd/hdd..

  • Page 78: 3.9   Installing M.2

    71 hardware installation 3.9 installing m.2 step 2 fasten one m3 screws. Step 1 m.2 slot..

  • Page 79: 3.10   Installing M2Dom

    72 hardware installation ©vecow ecs-9200/9100 user manual 3.10 installing m2dom step 2 m2dom module. Step 1 m2dom slot..

  • Page 80

    73 hardware installation step 4 lock two m2 screws with slot. Step 3 install m2dom module with slot..

  • Page 81

    74 hardware installation ©vecow ecs-9200/9100 user manual 3.11 mounting your ecs-9200/9100 step 1 ensure the screw holes on the right and left side of the upper case match the ones on ecs-9200/9100 wall mount bracket. 3.11.1 wall mount bracket.

  • Page 82

    75 hardware installation step 2 fasten 4pcs khs#6-32 screws then finish..

  • Page 83

    76 hardware installation ©vecow ecs-9200/9100 user manual 3.11.2 vesa mount step 1 ecs-9200/9100 and vesa mount. Step 2 take ecs-9200/9100 and vesa mount with fasten 4pcs khs#6-32 screws..

  • Page 84

    77 hardware installation step 3 fasten four khs#6-32 screws and then finish. Step 4 finish. Step 5 vesa size have 75x75mm(red) and 100x100mm(yellow)..

  • Page 85

    78 hardware installation ©vecow ecs-9200/9100 user manual 3.11.3 din rail kit step 1 ecs-9200/9100 and din rail kit. Step 2 take ecs-9200/9100 and din rail kit and fasten four khs#6-32 screws in the four marked corners..

  • Page 86

    79 hardware installation step 3 fasten four khs#6-32 screws and then finish. Step 4 finish. Step 5 ecs-9200/9100 with din rail..

  • Page 87: Bios Setup

    80 bios and driver setting ©vecow ecs-9200/9100 user manual 4 bios setup 4.1 entering bios setup bios provides an interface for users to check and change system configuration. The bios setup program is accessed by pressing the key when post display output is shown. Figure 4-1: entering setup screen.

  • Page 88: 4.2   Main

    81 bios and driver setting 4.2 main the main menu displays bios version and system information. There are two options on main menu, system date and system time. System date set the date. Use to switch between date elements. System time set the time. Use to switch between time elements. Figure 4-2: b...

  • Page 89

    82 bios and driver setting ©vecow ecs-9200/9100 user manual 4.3.1 acpi settings enable hibernation enables or disables system's ability to hibernate (os/s4 sleep state). This option may not be effective with some os. Acpi sleep state selects the highest acpi sleep state the system will enter when th...

  • Page 90

    83 bios and driver setting 4.3.3 pch-fw configuration me unconfig on rtc clear state disabling this option will cause me not to unconfigure on rtc clear. Me state set me to soft temporarily disabled. Figure 4 3-3: pch-fw settings 4.3.4 smart settings smart self test run smart self test on all hdds d...

  • Page 91

    84 bios and driver setting ©vecow ecs-9200/9100 user manual serial port 1 configuration set parameters of serial port 1 (com 1). Serial port 2 configuration set parameters of serial port 2 (com 2). Serial port 3 configuration set parameters of serial port 3 (com 3). Serial port 4 configuration set p...

  • Page 92

    85 bios and driver setting hyper-threading enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled, only one thread per core is enabled. Active processor cores number of cores to enable ...

  • Page 93

    86 bios and driver setting ©vecow ecs-9200/9100 user manual 4.3.9 intel txt information display intel txt information. Figure 4 3-9: intel txt information 4.3.10 sata configuration figure 4 3-10: sata devices settings cpu c state enable or disable cpu c states. Enhanced c-states enable/disable c1e. ...

  • Page 94

    87 bios and driver setting sata controller(s) enable or disable sata device. Sata mode selection determines how sata controller(s) operate. Software feature mask configuration raid orom/rst driver will refer to the swfm configuration to enable or disable the storage features. Aggressive lpm support ...

  • Page 95

    88 bios and driver setting ©vecow ecs-9200/9100 user manual 4.3.12 csm configuration csm support enable/disable csm support gatea20 active upon request - ga20 can be disabled using bios services. Always - do not allow ga20 to be disabled; this option is useful when any rt code is executed above 1mb....

  • Page 96

    89 bios and driver setting 4.3.13 usb configuration legacy usb support enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Xhci hand-off this is a workaround for os-es without xhci ...

  • Page 97: 4.4   Chipset

    90 bios and driver setting ©vecow ecs-9200/9100 user manual vt-d vt-d capability. Gmm device (b0:d8:f0) enable/disable sa gmm device. Above 4gb mmio bios assignment enable/disable above 4gb memorymappedio bios assignment. This is disabled automatically when aperture size is set to 2048mb. 4.4.1 syst...

  • Page 98

    91 bios and driver setting 4.4.2 graphics configuration of system agent (sa) gtt size select the gtt size. Aperture size select the aperture size. Note: above 4gb mmio bios assignment is automatically enabled when selecting 2048mb aperture. To use this feature, please disable csm support. Dvmt pre-a...

  • Page 99

    92 bios and driver setting ©vecow ecs-9200/9100 user manual 4.4.4 memory information of system agent (sa) displays memory information. Figure 4-4-4: memory information 4.4.5 pch-io configuration figure 4-4-5: pch-io settings pch lan controller enable or disable onboard nic. Wake on lan enable or dis...

  • Page 100

    93 bios and driver setting 4.4.6 pci express configuration of pch-io figure 4-4-6: pch-io settings dmi link aspm control enable/disable the control of active state power management on sa side of the dmi link. Native pcie enable pci express native support enable/disable. This feature is available in ...

  • Page 101

    94 bios and driver setting ©vecow ecs-9200/9100 user manual 4.4.8 sb porting configuration of pch-io sata raid rom legacy rom: legacy option rom uefi driver: uefi raid driver both: run the legacy option rom and uefi driver. Figure 4-4-8: raid rom settings 4.4.9 gpio manager configuration vga enable ...

  • Page 102: 4.5   Security

    95 bios and driver setting set user password set hdd user password. *** advisable to power cycle system after setting hard disk passwords *** discard or save changes option in setup does not have any impact on hdd when password is set or removed. If the 'set hdd user password' option is gray, do pow...

  • Page 103: 4.6   Boot

    96 bios and driver setting ©vecow ecs-9200/9100 user manual 4.6 boot figure 4-6: bios boot menu setup prompt timeout number of seconds to wait for setup activation key. 65535(0xffff) means indefinite waiting. Bootup numlock state select the keyboard numlock state. Quiet boot enables or disables quie...

  • Page 104: 4.7   Save & Exit

    97 bios and driver setting 4.7 save & exit figure 4-7: bios save and exit menu save changes and exit exit system setup after saving the changes. Discard changes and exit exit system setup without saving any changes. Save changes and reset reset the system after saving the changes. Discard changes an...

  • Page 105: A.1   Function Description

    98 ©vecow ecs-9200/9100 user manual appendix a a appendix a : isolated dio guide pin no. Definition description pin no. Definition description 1 ext_in0 di0 11 ext_out0 do0 2 ext_in1 di1 12 ext_out1 do1 3 ext_in2 di2 13 ext_out2 do2 4 ext_in3 di3 14 ext_out3 do3 5 ext_in4 di4 15 ext_out4 do4 6 ext_i...

  • Page 106: A.2   Dio Signal Circuit

    99 appendix a a.2 dio signal circuit di reference circuit: sink mode (npn) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector source mode (pnp) v+ v- power supply 6-48v dc di_com (pin 9) di (pin1-8) dio connector do reference circuit: v+ io v- device 6-48v dc dio_vdc (pin 20) do (p...

  • Page 107: A.4   Dio Demo Tool

    100 ©vecow ecs-9200/9100 user manual appendix a run batch file as administrator. Runtime folder include head file for software developer or system integration. Sample folder include sample program, driver package, and driver api library. Source folder include sample program source code that compile ...

  • Page 108: B.1   Ecs9K2.Dll Api

    101 appendix b b appendix b : software functions b.1 ecs9k2.Dll api in runtime folder, on ecs9k2.H: bool initial(byte isolate_type, byte dio_npn); install driver and initial machine for dio access isolate_type: dio isolate type 1: isolated dio; 0: non-isolated dio dio_npn: dio npn mode 1: pnp (sourc...

  • Page 109

    102 ©vecow ecs-9200/9100 user manual appendix b bool setdo2(byte do); set dio2 output do: dio2 output (do[7:0]) return: true (1): success; false (0): fail (driver not work, or hardware problem) bool getdo2(byte *do); get dio2 output do: dio2 output (do[7:0]) return: true (1): success; false (0): fai...

  • Page 110

    103 appendix b bool setpoe(byte poe); set poe on/off setup poe: poe switch (poe[7:0]) return: true (1): success; false (0): fail (driver not work, or hardware problem) bool getdio1config(byte *isolate_type, byte *di_npn, byte *do_npn); get dio1 configuration isolate_type: dio1 isolate type 1: isolat...

  • Page 111: C.1   Sata Mode For Raid

    104 ©vecow ecs-9200/9100 user manual appendix c c appendix c : raid installation guide c.1 sata mode for raid please select sata device to raid mode on bios menu. Advanced → sata configuration → sata mode selection c.2 os installation ecs-9200 is featured with six sata, include two internal sata, th...

  • Page 112: Technology” Software

    105 appendix c c.4 install “intel rapid storage technology” software you can get the software on ecs-9200 driver cd. Also, you can find latest information and software directly from intel website. Http://www.Intel.Com/p/en_us/support/highlights/chpsts/imsm the raid environment has been done if you c...

  • Page 113

    106 ©vecow ecs-9200/9100 user manual appendix c then add “logical device” for windows access. C.7 disk management : partition the disk after raid 1 volume created, you can see the figure of sata device allocation. To start disk management tool, select "initialize disk." you will find “volume_0000” i...

  • Page 114: Different

    107 appendix c c.10 recovery and auto re-build when use different raid hdd there is a warning will pop-up to ask you if the disk is not a member of original raid volume. If you press “rebuild”, it will replace the broken sata hdd to the last one sata hdd of raid volume. C.9 recovery and auto re-buil...

  • Page 115

    108 ©vecow ecs-9200/9100 user manual appendix d d appendix d : power consumption testing board ecs-9200 ram 16gb x 2 usb-1 usb keyboard logitech k120 usb-2 usb mouse microsoft 1113 usb-3 usb flash transecnd 3.0 8gb usb-4 usb flash transecnd 3.0 8gb cfast innodisk cfast 3me3 64gb sata 0 transcend ssd...

  • Page 116

    109 appendix d d.1 intel® core™ i7-6700@3.40ghz (8m cache, 4.0 ghz) cpu power input sleep mode idle status : cpu usage less 3% max current max consumption max current max consumption core™ i7- 6700 06v 0.846a 05.08w 3.411a 20.47w core™ i7- 6700 09v 0.554a 04.99w 2.311a 20.80w core™ i7- 6700 12v 0.40...

  • Page 117

    110 ©vecow ecs-9200/9100 user manual appendix d d.2 intel® core™ i5-6500te@2.30ghz (6m cache, 3.30 ghz) cpu power input run 100% cpu usage without 3d run 100% cpu usage with 3d max current max consumption max current max consumption core™ i5- 6500te 06v 5.493a 32.96w 7.783a 46.70w core™ i5- 6500te 0...

  • Page 118

    111 appendix d d.3 intel® core™ i3-6100@3.70ghz (3m cache, 3.70 ghz) cpu power input sleep mode idle status : cpu usage less 3% max current max consumption max current max consumption core™ i3- 6100 06v 0.836a 05.02w 3.264a 19.58w core™ i3- 6100 09v 0.584a 05.26w 2.263a 20.37w core™ i3- 6100 12v 0.4...

  • Page 119: Storage List

    112 ©vecow ecs-9200/9100 user manual appendix e e appendix e : supported memory & storage list testing board ecs-9200 memory test version: 5.1 burnintest v8.1 e.1 supported memory list channel memtest bunin flash bios remove battery *2 pass pass pass pass *1(socket 1) pass pass n/a pass *1(socket 2)...

  • Page 120: Non-Ecc

    113 appendix e brand info note & s test temp. (celsius) kingston 16gb 2rx8 2gx64-bit pc4-2133 kvr21s15d8/16 bkmm1641607 25ºc bkmm1661618 25ºc memxpro 4gb ddr4-2133-15 wild temp. D4s4ghiofei 01611170040001 25ºc 01611170040002 25ºc memxpro 8gb ddr4-2133-15 wild temp. D4s8ghioffi 01611150020001 25ºc ...

  • Page 121

    114 ©vecow ecs-9200/9100 user manual appendix e type brand model capacity msata intel intel-310 ssdmaemc080g2 80gb silicon power sp128gimsa301sw0 128gb sata ssd transcend ssd370 ts64gssd370 64gb memxpro ssd m3a mi3ma1212802wn 128gb ssd m3a mi3ma1225604wn 256gb ssd m3a mi3ma1251208wn 512gb innodisk 3...

  • Page 122

    For further support information, please visit www.Vecow.Com this document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or...