1. DL manuals
  2. Vecow
  3. Desktop
  4. RCS-9412F-GTX1080
  5. User Manual

Vecow RCS-9412F-GTX1080 User Manual

Manual is about: Intel Xeon/Core i7 GPU Computing System with NVIDIA GeForce GTX1080 Workstation-grade Performance, Expandable, Independent Graphics, RCS-9000F GTX1080 Series

Summary of RCS-9412F-GTX1080

  • Page 1

    User manual user manual 1.0.0 edition 20180402 rcs-9000f gtx1080 intel ® xeon ® /core™ i7 gpu computing system with nvidia ® geforce ® gtx1080 workstation-grade performance, expandable, independent graphics.

  • Page 2: Record of Revision

    Ii version date page description remark 0.10 2018/04/10 all preliminary release 1.00 2018/04/12 official release record of revision.

  • Page 3: Fcc

    Iii this manual is released by vecow co., ltd. For reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential da...

  • Page 4: Order Information

    Iv part number description rcs-9430f-gtx1080 rcs-9400f, nvidia ® geforce ® gtx1080, 2 gige lan, 1 pcie x4, 1 pcie x1, 4 com, 7 usb 3.0, 3 sim, isolated dio rcs-9430fh-gtx1080 rcs-9400f w/65w cpu, nvidia ® geforce ® gtx1080, 2 gige lan, 1 pcie x4, 1 pcie x1, 4 com, 7 usb 3.0, 3 sim, isolated dio rcs-...

  • Page 5: Order Accessories

    V part number description e3-1275 v6 intel ® xeon ® e3-1275 v6 processor, 8m cache, up to 4.20 ghz, 73w e3-1275 v5 intel ® xeon ® e3-1275 v5 processor, 8m cache, up to 4.00 ghz, 80w e3-1225 v5 intel ® xeon ® e3-1225 v5 processor, 8m cache, up to 3.70 ghz, 80w e3-1268l v5 intel ® xeon ® e3-1268l v5 p...

  • Page 6: Table of Contents

    Vi table of contents chapter 1 general introduction 1 1.1 overview 1 1.2 features 2 1.3 product specification 2 1.3.1 specifications of rcs-9430f gtx1080 2 1.3.2 specifications of rcs-9430fh gtx1080 5 1.3.3 specifications of rcs-9430fr gtx1080 7 1.3.4 specifications of rcs-9430fhr gtx1080 9 1.3.5 sp...

  • Page 7: Chapter   2

    Vii chapter 2 getting to know your rcs-9000f gtx1080 30 2.1 packing list 30 2.2 front panel i/o & functions 31 2.3 main board expansion connectors 42 2.4 main board jumper settings 58 2.5 ignition control 62 chapter 3 system setup 65 3.1 how to open your rcs-9000f gtx1080 65 3.2 installing cpu 75 3....

  • Page 8: 110

    Viii appendix a : isolated dio guide 110 appendix b :gpio and wdt functions 115 appendix c :raid installation guide 116 appendix d : power consumption 122 appendix e :supported memory & storage list 125 appendix f : power supply installation 128.

  • Page 9: General Introduction

    1 general introduction 1 general introduction 1.1 overview rcs-9000f gtx1080 is a performance-driven expandable gpu computing system for ai-oriented embedded applications. Powered by 7th generation intel ® xeon ® /core™ i7/i5/i3 processor, 2560 cuda ® cores nvidia ® geforce ® gtx 1080 supporting adv...

  • Page 10: 1.3   Product Specification

    2 general introduction ©vecow rcs-9000f gtx1080 user manual 1.3 product specification 1.3.1 specifications of rcs-9430f gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133 mhz • up to 32gb • ...

  • Page 11

    3 general introduction expansion mini pcie 3 mini pcie socket : • 2 full-size for pcie/usb/external sim card • 1 full-size for pcie/usb/internal sim card/msata pci/pcie • 1 pcie x4 slot • 1 pcie x1 slot graphics graphics processor • intel ® hd graphics 630/530 • nvidia ® geforce ® gtx 1080 interface...

  • Page 12

    4 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual software support os windows 10, windows 8.1, windows 7 linux fedora 13, ubuntu 10.04 lts, or linux kernel 3.0 above mechanical dimension (w x d x h) 172mm x 330mm x 210mm (6.8" x 13" x 8.3") weight 4.4 kg (9.7 lb) mounting...

  • Page 13

    5 general introduction 1.3.2 specifications of rcs-9430fh gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422/...

  • Page 14

    6 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground ...

  • Page 15

    7 general introduction 1.3.3 specifications of rcs-9430fr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422/...

  • Page 16

    8 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground ...

  • Page 17

    9 general introduction 1.3.4 specifications of rcs-9430fhr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422...

  • Page 18

    10 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 19

    11 general introduction 1.3.5 specifications of rcs-9421f gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422/...

  • Page 20

    12 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 21

    13 general introduction 1.3.6 specifications of rcs-9421fh system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422/485 wit...

  • Page 22

    14 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 23

    15 general introduction 1.3.7 specifications of rcs-9421fr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422...

  • Page 24

    16 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 25

    17 general introduction 1.3.8 specifications of rcs-9421fhr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/42...

  • Page 26

    18 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 27

    19 general introduction 1.3.9 specifications of rcs-9412f gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/422/...

  • Page 28

    20 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 29

    21 general introduction 1.3.10 specifications of rcs-9412fh gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/42...

  • Page 30

    22 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 31

    23 general introduction 1.3.11 specifications of rcs-9412fr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/42...

  • Page 32

    24 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 33

    25 general introduction 1.3.12 specifications of rcs-9412fhr gtx1080 system processor quad core intel ® xeon ® /core™ i7/i5/i3 processor (kaby lake-s/skylake-s) chipset intel ® c236 bios ami sio it8786e memory • ddr4 2133mhz • up to 32gb • 2 204-pin so-dimm socket i/o interface serial 4 com rs-232/4...

  • Page 34

    26 general introduction ©vecow rcs-9000f gtx1080 user manual ethernet lan 1 intel ® i219lm gigabit lan supports iamt 11.0 lan 2 intel ® i210 gigabit lan power input voltage 35w tdp cpu : 12v to 36v, dc-in 65w/80w tdp cpu : 16v to 36v, dc-in power interface 3-pin terminal block : v+, v-, frame ground...

  • Page 35: 1.4   Supported Cpu List

    27 general introduction 1.4 supported cpu list processor no. Tdp cache max. Frequency embedded xeon ® e3-1275 v6 73w 8m up to 4.20 ghz yes xeon ® e3-1275 v5 80w 8m up to 4.00 ghz yes xeon ® e3-1225 v5 80w 8m up to 3.70 ghz yes xeon ® e3-1225l v5 35w 8m up to 3.40 ghz yes core™ i7-7700 65w 8m up to 4...

  • Page 36: 1.5   Mechanical Dimension

    28 general introduction ©vecow rcs-9000f gtx1080 user manual 1.5 mechanical dimension 1.5.1 dimensions of rcs-9430f gtx1080/rcs-9421f gtx1080/ rcs-9412f gtx1080 1.5.2 dimensions of rcs-9430fh gtx1080/rcs-9421fh gtx1080/ rcs-9412fh gtx1080 382.0 (15.04") 362.0 (14.25") 210.0 (8.27") 160.0 (6.30") 330...

  • Page 37

    29 general introduction 1.5.3 dimensions of rcs-9430fr gtx1080/rcs-9421fr gtx1080/ rcs-9412fr gtx1080 1.5.4 dimensions of rcs-9430fhr gtx1080/rcs-9421fhr gtx1080/ rcs-9412fhr gtx1080 210.0 (8.27") 160.0 (6.30") 382.0 (15.04") 362.0 (14.25") 330.0 (12.99") 250.4 (9.86") 210.0 (8.27") 171.9 (6.77") 17...

  • Page 38: 2.1   Packing List

    30 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2 getting to know your rcs-9000f gtx1080 2.1 packing list item description qty 1 rcs-9000f gtx1080 gpu computing system (according to the configuration you order, the rcs-9000f gtx1080 series may contain ssd/hdd and ddr4 ...

  • Page 40

    32 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.2.2 reset tact switch the item circled red is a hardware reset switch. Use this switch to reset the system without powering off the rcs-9000. Press and hold the reset switch for a few seconds, then reset will be enabled...

  • Page 44

    36 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.2.9 10/100/1000 mbps ethernet port there are two 8-pin rj-45 jacks supporting 10/100/1000 mbps ethernet connections on the front side of rcs-9000. Lan 1 is powered by intel ® i219lm ethernet engine, and lan 2 is powered...

  • Page 48

    40 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual gpi sink mode isolated gpi input circuit in sink mode (npn) is illustrated as follows: gpi source mode digital gpi input signal circuit in source mode (pnp) is illustrated as follows: gpo sink mode digital gpo output circ...

  • Page 50

    42 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.3 main board expansion connectors 2.3.1 front view of rcs-9000 main board with connector location 1 3 4 6 sata3 sata4 fan1 cn20 cn36 bios jp3 jp5 jp4 jp2 cn15 cn12 cn7 sw1 bat1 j1 jusb1 cn9 cn8 sata2 sata1 fan2 mpcie1 m...

  • Page 51

    43 getting to know your rcs-9000f gtx1080 2.3.3 cn12 : gpio 1 3 4 6 the rcs-9000 offers sixteen programmable i/o within ttl 5v tolerance. If the gpio is logic high, it indicates that the mapping on sio gpio pin is logic high level. If the gpio is logic low, it indicates that the mapping on sio gpio ...

  • Page 52

    44 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.3.4 sys_fan1, sys_fan2 the fan power connector is for additional thermal requirements. The pin assignments of sys_fan1 and sys_fan2 are listed in the following table: pin no. Function pin no. Function 1 gnd 3 fan speed ...

  • Page 53

    45 getting to know your rcs-9000f gtx1080 2.3.6 cn8 : one pcie x4 or four pcie x1 (pch) the pin assignments of cn8 are listed in the following table: pin no. Function pin no. Function a1 reserved b1 +v12s a2 +v12s b2 +v12s a3 +v12s b3 +v12s a4 gnd b4 gnd a5 clkout_100m_x4_p9 b5 sm_slot_clk a6 clkout...

  • Page 54

    46 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.3.7 cn7 : pcie x16 (cpu) the pin assignments of cn7 are listed in the following table: pin no. Function pin no. Function a1 reserved b1 +v12s a2 +v12s b2 +v12s a3 +v12s b3 +v12s a4 gnd b4 gnd a5 clkout_100m_x16_p5 b5 sm...

  • Page 55

    47 getting to know your rcs-9000f gtx1080 pin no. Function pin no. Function a35 peg_rxp_4 b35 gnd a36 peg_rxn_4 b36 gnd a37 gnd b37 peg_txp_5 a38 gnd b38 peg_txn_5 a39 peg_rxp_5 b39 gnd a40 peg_rxn_5 b40 gnd a41 gnd b41 peg_txp_6 a42 gnd b42 peg_txn_6 a43 peg_rxp_6 b43 gnd a44 peg_rxn_6 b44 gnd a45 ...

  • Page 56

    48 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.3.8 sata1, sata2, sata3, sata4 : sata iii connector there are four onboard high performance serial ata iii's (sata iii) on rcs-9000. It supports higher storage capacity with less cabling effort and smaller required spac...

  • Page 57

    49 getting to know your rcs-9000f gtx1080 2.3.10 cn20, cn36 : sata power connector the rcs-9000 is also equipped with two sata power connectors. It supports 5v (up to 3a) and 12v (up to 3a) currents to the hard drive or ssd. The pin assignments of cn20 and cn36 are listed in the following table: pin...

  • Page 58

    50 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual pin no. Definition pin no. Definition 1 +v5_usb3_pwr5 6 usb_d_ssrx_5p 2 usb_d_4n 7 gnd 3 usb_d_4p 8 usb_d_sstx_5n 4 gnd 9 usb_d_sstx_5p 5 usb_d_ssrx_5n the rcs-9000 main board provides up to two expansion usb ports using ...

  • Page 59

    51 getting to know your rcs-9000f gtx1080 1 3 4 6 2.3.13 mpcie1 : mini pcie, msata both msata and mini pcie share the same form factor and similar electrical pinout assignments on their connectors. There was no clear mechanism to distinguish if an msata drive or a mini pcie device is plugged into th...

  • Page 60

    52 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual pin no. Function pin no. Function 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 46 reserved 43 status 44 reserved 41 +3.3vaux 42 reserved 39 +3.3vaux 40 gnd 37 gnd 38 usb_d+ 35 gnd 36 usb_d- ...

  • Page 61

    53 getting to know your rcs-9000f gtx1080 2.3.14 mpcie2, mpcie3 : mini pcie 1 3 4 6 mpcie2 mpcie3 the pin assignments of mpcie2 and mpcie3 are listed in the following table: pin no. Function pin no. Function 51 reserved 52 +3.3vaux 49 reserved 50 gnd 47 reserved 48 +1.5v 45 reserved 46 reserved 43 g...

  • Page 62

    54 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 37 gnd 38 usb_d+ 35 gnd 36 usb_d- 33 petp0 34 gnd 31 petn0 32 smb_data 29 gnd 30 smb_clk 27 gnd 28 +1.5v 25 perp0 26 gnd 23 pern0 24 +3.3vaux 21 gnd 22 perst# 19 reserved 20 reserved 17 reserved 18 gnd mechanical key 15 g...

  • Page 63

    55 getting to know your rcs-9000f gtx1080 2.3.15 cn9 : cfast 1 3 4 6 cn9 the rcs-9000 system comes with a cfast socket on the front panel for type-i/ type-ii compact flash card. It is implemented by a sata iii port from c236 pch. Be sure to disconnect the power source and unscrew the cfast socket co...

  • Page 64

    56 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.3.16 cn16 : io board connector cn16 the pin assignments of cn16 are listed in the following table: pin no. Function pin no. Function 1 uim_pwr_2 2 uim_pwr_3 3 uim_data_2 4 uim_data_3 5 uim_clk_2 6 uim_clk_3 7 uim_reset_...

  • Page 65

    57 getting to know your rcs-9000f gtx1080 53 uart3_dsr# 54 uart4_dsr# 55 uart3_rts# 56 uart4_rts# 57 uart3_cts# 58 uart4_cts# 59 uart3_ri# 60 uart4_ri# 61 uart3_mode0 62 uart4_mode0 63 uart3_mode1 64 uart4_mode1 65 uart3_mode2 66 uart4_mode2 67 sp338e_term_com3 68 sp338e_term_com4 69 +v3.3s 70 +v3.3...

  • Page 66

    58 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.4 main board jumper settings you may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small...

  • Page 67

    59 getting to know your rcs-9000f gtx1080 2.4.2 jp4, jp5 1 3 4 6 pin header pin no. Description com1 jp4 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) 5-6 ri(default) pin header pin no. Description com2 jp5 1-2 +5v (1a max.) 3-4 +12v (0.5a max.) 5-6 ri(default) jp5 jp4.

  • Page 68

    60 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.4.3 jp1 : cpu pcie x 16(cn8) configuration 1 3 4 6 jp1 cpu pcie x 16(cn8) configuration table as follows: pin header pin no. Pcie configuration jp1 (3-5) (4-6) 1 x8, 2 x4 (3-5) (2-4) 2 x 8 (1-3) (2-4) 1 x16 2.4.4 jp2 : ...

  • Page 69

    61 getting to know your rcs-9000f gtx1080 2.4.5 jp6 : usb wake up pin header pin no. Definition jp6 2-3 usb 3.0 and usb 2.0 wake up disable 1-2 usb 3.0 and usb 2.0 wake up enable(default) 1 3 4 6 jp6 2.4.6 jp3 1 3 4 6 jp3 pin header pin no. Definition jp3 2-3 disable flash descriptor security (overr...

  • Page 70: 2.5   Ignition Control

    62 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.5 ignition control 2.5.1 sw1 : ignition control the rcs-9000 series provide ignition power control feature for in-vehicle applications. The built-in mcu monitors the ignition signal and turns on/off the system according...

  • Page 71

    63 getting to know your rcs-9000f gtx1080 dip-switch position power on delay power off delay switch position 0 atx/at mode 1 no delay no delay 2 no delay 5 seconds 3 no delay 10 seconds 4 no delay 20 seconds 5 5 seconds 30 seconds 6 5 seconds 60 seconds 7 5 seconds 90 seconds 8 5 seconds 30 minutes ...

  • Page 72

    64 getting to know your rcs-9000f gtx1080 ©vecow rcs-9000f gtx1080 user manual 2.5.3 ignition control wiring to activate ignition control, you need to provide ign signal via the 3-pin plugable terminal block located on the front panel. Please use the following pictures to find the general wiring con...

  • Page 73: System Setup

    65 hardware installation system setup 3 3.1 how to open your rcs-9000f gtx1080 step 1 remove two f-6-32x6 screws (circled in red) and five f-m3x4 screws (circled in yellow) on the top cover. Take off the top cover.

  • Page 74

    66 hardware installation ©vecow rcs-9000f gtx1080 user manual step 2 remove atx power cable on mb and gtx-1080. Take off the top cover..

  • Page 75

    67 hardware installation step 3 remove two m3x5l screws. Push down the pcie x16 slot lock and remove gtx-1080..

  • Page 76

    68 hardware installation ©vecow rcs-9000f gtx1080 user manual step 4 remove five f-m3x4 screws on the bottom cover. Remove two f-m3x4 screws on the front..

  • Page 77

    69 hardware installation take off the bottom cover. Remove three f-m3x4 screws on the rear..

  • Page 78

    70 hardware installation ©vecow rcs-9000f gtx1080 user manual step 5 remove riser card ph-m3 screws(circle in red), fan cable (circle in yellow) and take off the riser card..

  • Page 79

    71 hardware installation step 6 remove com ports eight #4-40 (red) and one khs-632x8 (yellow) screw on the front panel. Remove four f-632x6 screws..

  • Page 80

    72 hardware installation ©vecow rcs-9000f gtx1080 user manual 1 2 3 step 7 take off the front panel sequence 1~3. Sequence 1..

  • Page 81

    73 hardware installation sequence 2. Sequence 3..

  • Page 82

    74 hardware installation ©vecow rcs-9000f gtx1080 user manual step 8 take off the sata cable..

  • Page 83: 3.2   Installing Cpu

    75 hardware installation 3.2 installing cpu step 1 remove five m3x11 spring screws (red) and five ph m3x6l screws (yellow). Step 2 open the cpu slot. Step 3 push the slot key..

  • Page 84

    76 hardware installation ©vecow rcs-9000f gtx1080 user manual step 5 close the slot key. Step 4 check cpu and cpu slot lock pin. Step 6 make sure the key is in the screw..

  • Page 85

    77 hardware installation 3.3 installing ddr4 so-dimm modules step 1 install ddr4 ram module into so-dimm slot. Step 2 make sure the ram module is locked by the memory slot (red)..

  • Page 86

    78 hardware installation ©vecow rcs-9000f gtx1080 user manual 3.4 installing mini pcie card step 1 install mini pcie card into the mini pcie slot. Step 2 fasten one m2.5 screw..

  • Page 87

    79 hardware installation 3.5 installing antenna cable 1 2 3 step 1 check antenna cable and washers. Step 2 remove one rubber cork from the rear panel. (pick the location you want)..

  • Page 88

    80 hardware installation ©vecow rcs-9000f gtx1080 user manual step 3 fasten washer 1, washer 2, and washer 3 on antenna cable connector. Step 4 antenna cable installation is finished..

  • Page 89: 3.6   Installing Cfast Card

    81 hardware installation 3.6 installing cfast card step 1 open the top cover so you can see the cfast slot. Step 2 install the cfast card in the slot..

  • Page 90: 3.7   Installing Sim Card

    82 hardware installation ©vecow rcs-9000f gtx1080 user manual 3.7 installing sim card 3.7.1 external sim card step 1 remove sim cover. Step 3 finish. Step 2 install sim card in the marked red area..

  • Page 91

    83 hardware installation 3.7.2 internal sim card step 1 open the top cover so you can see the sim slot. Step 2 finish..

  • Page 92

    84 hardware installation ©vecow rcs-9000f gtx1080 user manual 3.8 installing pci/pcie card step 2 remove m3x5l screws and pci bracket. Step 1 open the top cover so you can see the pci/pcle slot. Step 4 finish. Step 3 install the pci/pcie card and lock it in place. Rcs-94xxf series : supports the ful...

  • Page 93: 3.9   Installing Ssd/hdd

    85 hardware installation 3.9 installing ssd/hdd 3.9.1 external ssd/hdd (for rcs-9430fr/9430fhr/9421fr/9421fhr/ 9412fr/9412fhr-gtx1080) step 3 push back and close the ssd/hdd tray. Step 2 insert 2.5" ssd/hdd into the tray. Sata 4 sata 3 sata 2 sata 1 step 1 trigger and open ssd/ hdd tray. Step 4 lock...

  • Page 94

    86 hardware installation ©vecow rcs-9000f gtx1080 user manual 3.9.2 internal ssd/hdd (for rcs-9430f/9430fh/9421f/9421fh/ 9412f/9412fh-gtx1080) step 1 repeat 3.1 steps one through seven. Step 2 remove four f-m3x4 screws (red)..

  • Page 95

    87 hardware installation step 3 install ssd/hdd with bracket. Loch the ssd/hdd with bracket in f-m3x4l(one ssd with four f-m3x4l)..

  • Page 96

    88 hardware installation ©vecow rcs-9000f gtx1080 user manual 3.10 mounting your rcs-9000f gtx1080 step 3 install four f-632x6l screws. Step 2 install wall mount to rcs-9000 bottom. Step 1 take the rcs-9000 wallmount..

  • Page 97: Bios and Driver Setting

    89 bios and driver setting 4 bios and driver setting 4.1 bios settings bios provides an interface for users to check and change system configuration. The bios setup program is accessed by pressing the key when post display output is shown. Figure 4-1 : entering setup screen.

  • Page 98: 4.2   Main Menu

    90 bios and driver setting ©vecow rcs-9000f gtx1080 user manual 4.2 main menu the main menu displays bios version and system information. There are two options on main menu. System date set the date. Use to switch between date elements. System time set the time. Use to switch between time elements. ...

  • Page 99

    91 bios and driver setting hardware prefetcher to turn on/off the mlc streamer prefetcher. Adjacent cache line prefetch to turn on/off prefetching of adjacent cache lines. Intel (vmx) virtualization technology when enabled, a vmm can utilize the additional hardware capabilities provided by vanderpoo...

  • Page 100

    92 bios and driver setting ©vecow rcs-9000f gtx1080 user manual 4.3.2 power & performance figure 4-3-2 : power & performance boot performance mode select the performance state that the bios will set before os handoff. Intel(r) speedstep(tm) allows more than two frequency ranges to be supported. Inte...

  • Page 101

    93 bios and driver setting rc6 (render standby) check to enable render standby support. Maximum gt frequency maximum gt frequency limited by the user. Choose between 350mhz (rpn) and 1150mhz (rp0). Value beyond the range will be clopped to min/max supported by sku 4.3.2.2 gt – power management contr...

  • Page 102

    94 bios and driver setting ©vecow rcs-9000f gtx1080 user manual control the tpm device status and display related information if tpm chip is present. 4.3.4 trusted computing figure 4-3-4 : trusted computing enable hibernation enables or disables system's ability to hibernate (os/s4 sleep state). Thi...

  • Page 103

    95 bios and driver setting 4.3.7 it8786 super io configuration figure 4-3-7 : it8786 super io configuration serial port 1 to port 4 configuration options for serial port 1 to serial port 4. Entering the corresponding port option then end user can change the settings such as i/o resource and uart mod...

  • Page 104

    96 bios and driver setting ©vecow rcs-9000f gtx1080 user manual console redirection console redirection enable or disable. Console redirection settings these settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the sa...

  • Page 105

    97 bios and driver setting acoustic management configuration option to enable or disable automatic acoustic management. 4.3.11acoustic management configuration figure 4-3-11: acoustic management settings above 4g decoding globally enables or disables 64bit capable devices to be decoded in above 4g a...

  • Page 106

    98 bios and driver setting ©vecow rcs-9000f gtx1080 user manual network stack enable/disable uefi network stack. Ipv4 pxe support enable/disable ipv4 pxe boot support. Ipv4 http support enable/disable ipv4 http boot support. Ipv6 pxe support enable/disable ipv6 pxe boot support. Ipv6 http support en...

  • Page 107

    99 bios and driver setting csm support enable/disable csm support. Gatea20 active upon request-ga20 can be disabled using bios services. Always - do not allow ga20 to be disabled; this option is useful when any rt code is executed above 1mb. Option rom messages set display mode for option rom. Int19...

  • Page 108

    100 bios and driver setting ©vecow rcs-9000f gtx1080 user manual legacy usb support enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Xhci hand-off this is a workaround for oses w...

  • Page 109: 4.4   Chipset Functions

    101 bios and driver setting vt-d vt-d capability. Gmm device (b0:d8:f0) enable/disable sa gmm device. Above 4gb mmio bios assignment enable/disable above 4gb memorymappedio bios assignment. This is disabled automatically when aperture size is set to 2048mb. 4.4.1 system agent (sa) configuration figu...

  • Page 110

    102 bios and driver setting ©vecow rcs-9000f gtx1080 user manual 4.4.1.1 memory configuration displays memory information. Figure 4-4-1-1: memory configuration skip scaning of external gfx card if enable, it will not scan for external gfx card on peg and pch pcie ports. Primary display select which ...

  • Page 111

    103 bios and driver setting aperture size select the aperture size. Note: above 4gb mmio bios assignment is automatically enabled when selecting 2048mb aperture. To use this feature, please disable csm support. Dvmt pre-allocated select dvmt 5.0 pre-allocated (fixed) graphics memory size used by the...

  • Page 112

    104 bios and driver setting ©vecow rcs-9000f gtx1080 user manual pch lan controller enable or disable onboard nic. Wake on lan enable or disable integrated lan to wake the system. (the wake on lan cannot be disabled if me is on at sx state.) serial irq mode configure serial irq mode. State after g3 ...

  • Page 113

    105 bios and driver setting 4.4.2.2 sata and rst configuration figure 4-4-2-2: sata and rst settings sata controller(s) enable or disable sata device. Sata mode selection determines how sata controller(s) operate. Software feature mask configuration raid orom/rst driver will refer to the swfm config...

  • Page 114: 4.5   Security

    106 bios and driver setting ©vecow rcs-9000f gtx1080 user manual 4.5 security figure 4-5: bios security menu administrator password set administrator password. User password set user password. Secure boot customizable secure boot settings. Sata device type identifies that the sata port is connected ...

  • Page 115

    107 bios and driver setting 4.5.1 hdd security configuration figure 4-5-1: hdd security settings set user password set hdd user password. *** advisable to power cycle system after setting hard disk passwords *** discard or save changes option in setup does not have any impact on hdd when password is...

  • Page 116: 4.6   Boot

    108 bios and driver setting ©vecow rcs-9000f gtx1080 user manual 4.6 boot figure 4-6 : bios boot menu setup prompt timeout number of seconds to wait for setup activation key. 65535(0xffff) means indefinite waiting. Bootup numlock state select the keyboard numlock state. Quiet boot enables or disable...

  • Page 117: 4.7   Save & Exit

    109 bios and driver setting 4.7 save & exit figure 4-7 : bios save and exit menu save changes and exit exit system setup after saving the changes. Discard changes and exit exit system setup without saving any changes. Save changes and reset reset the system after saving the changes. Discard changes ...

  • Page 118: A.1   Function Description

    110 bios and driver setting ©vecow rcs-9000f gtx1080 user manual a appendix a : isolated dio guide a.1 function description the rcs-9000 offers two 16-bit isolated dio 20-pin terminal block connector, a 16-bit gpio 26-pin internal connector, and a watchdog timer. Isolated dio pins are fixed by hardw...

  • Page 119

    111 appendix a pin no. Description pin no. Description 1 gnd 14 gnd 2 gpio 15 15 gpio 7 3 gpio 14 16 gpio 6 4 gpio 13 17 gpio 5 5 gpio 12 18 gpio 4 6 gnd 19 gnd 7 gpio 11 20 gpio 3 8 gpio 10 21 gpio 2 9 gpio 9 22 gpio 1 10 gpio 8 23 gpio 0 11 gnd 24 gnd 12 cp 25 5v 13 cp 26 5v gpio definition is sho...

  • Page 120

    112 ©vecow rcs-9000f gtx1080 user manual appendix a do signal circuit in sink mode (npn) is illustrated as follows. (for 24v dc diagram) di signal circuit in source mode (pnp) is illustrated as follows. (for 24v dc diagram) a.3 software package contain distribution folder include x32 and x64 version...

  • Page 121: A.4   Sample

    113 appendix a runtime folder include head file for software developer or system integration. Sample folder include sample program, driver library, and api library. Source folder include sample program source code that compile on visual studio 2008. Sample rcs9k.Exe, as shown below: a.4 sample execu...

  • Page 122

    114 ©vecow rcs-9000f gtx1080 user manual appendix a do / dio output text: user setting, do / dio output state by hexadecimal bitmask - on / off. Use for write button activate. Do / dio writable text: user setting, do / dio writable of dio configuration by hexadecimal bitmask - yes / no. Use for read...

  • Page 123: B.1   Driver Api Guide

    115 appendix b b appendix b : software functions b.1 driver api guide in runtime folder, on rcs9k2.H: _dll_import_ definition is used on loadlibrary api for rcs9k.Dll. Rcs9k_exports definition is used on rcs9k.Dll building. Otherwise, that is used to compile with rcs9k.Lib bool initial(byte isolate_...

  • Page 124

    116 ©vecow rcs-9000f gtx1080 user manual appendix b bool setdio1config(byte *isolate_type, byte *di_npn, byte *do_npn, word *mask) bool setdio2config(byte *isolate_type, byte *di_npn, byte *do_npn, word *mask) set dio configuration isolate_type: dio type 1: isolated dio; 0: non-isolated dio (dio1 is...

  • Page 125

    117 appendix b return: true (1): success; false (0): fail (initial error, or hardware problem) bool getdio1(word *di) (it is the same as gpio) bool getdio2(word *di get non-isolated dio input (dio input) di ([15:0]): input state, pin setting by hexadecimal bitmask 1: high; 0: low return: true (1): s...

  • Page 126: C.1   Sata Mode For Raid

    118 ©vecow rcs-9000f gtx1080 user manual appendix c c appendix c :raid installation guide c.1 sata mode for raid c.1.1 sata mode for raid please select sata device to raid mode on bios menu. Advanced → sata configuration → sata mode selection → raid (skylake platform)/intel rst premium (kaby lake pl...

  • Page 127

    119 appendix c 3. Use rst legacy → disabled → save changes and reset. 4. Into bios menu again, select intel(r) rapid storage technology on bios menu. 5. Select create raid volume on bios menu..

  • Page 128: C.2   Os Installation

    120 ©vecow rcs-9000f gtx1080 user manual appendix c 6. Select disks to create raid volume then save changes and reset to install os with efi mode. C.2 os installation the system six sata, including four internal sata, one msataand one cfast. You can select one of the sata ports for os installation. ...

  • Page 129: Technology" Software

    121 appendix c c.6 to create raid volume on "rapid storage technology" software the system is featured with four sata hdd's for raid volume, so there are raid level options to choose on this page. Let's take raid 1 as an example, select"raid 1". C.7 disk management : partition the disk after raid 1 ...

  • Page 130

    122 ©vecow rcs-9000f gtx1080 user manual appendix c to start disk management tool, select "initialize disk". Then add "logical device" for windows access. C.8 if one sata hdd on raid volume is out-of-use after raid 1 volume is created, you can see the figure of sata device allocation. Hdd caution si...

  • Page 131: Different

    123 appendix c c.10 recovery and auto re-build when using different raid hdd a warning will pop-up to ask you if the disk is not a member of the original raid volume. If you press "rebuild", it will replace the broken sata hdd to the last sata hdd of raid volume. C.9 recovery and auto re-build when ...

  • Page 132

    124 ©vecow rcs-9000f gtx1080 user manual appendix d d appendix d : power consumption testing board rcs-9000f gtx1080 ram memxpro 8gb *2 sata 0 toshiba ssd thns064ge4bbdc 64gb sata 1 hitachi hts542580k9sa00 80g usb 3.0 -1 usb flash transcend 3.0 8gb usb 3.0 -2 usb flash transcend 3.0 8gb usb 3.0 -3 u...

  • Page 133: 4.2 Ghz)

    125 appendix d d.1 intel® core™ i7-7700@3.40ghz (8m cache, up to 4.2 ghz) cpu power input power on and boot to win10 64bit sleep mode idle status cpu usage less 3% max current max consumption max current max consumption i7-7700 15v 0.448a 06.72w 1.623a 24.35w i7-7700 24v 0.312a 07.49w 1.073a 25.75w ...

  • Page 134: To 3.4 Ghz)

    126 ©vecow rcs-9000f gtx1080 user manual appendix d d.2 intel® core™ i7-6700te@2.40ghz (8m cache, up to 3.4 ghz) cpu power input power on and boot to win10 64bit run 100% cpu usage without 3d run 100% cpu usage with 3d max current max consumption max current max consumption i7-6700te 12v 3.508a 42.1...

  • Page 135: Storage List

    127 appendix e e appendix e :supported memory & storage list e.1 suooprted memory list testing board rcs-9000f gtx1080 memory test version: 5.1 burnintest v8.1 e.2 test item channel memtest bunin flash remove battery bios remove battery pass pass pass *2 pass pass pass pass *1(socket 1) pass pass n/...

  • Page 136: E.3  Non-Ecc

    128 ©vecow rcs-9000f gtx1080 user manual appendix e e.3 non-ecc brand info note & s test temp. (celsius) kingston 16gb 2rx8 2gx64-bit pc4-2133 kvr21s15d8/16 bkmm1661618 25ºc bkmm1641607 25ºc memxpro 4gb ddr4-2133-15 wild temp. D4s4ghiofei 01611170040001 25ºc 01611170040002 25ºc memxpro 8gb ddr4-21...

  • Page 137

    129 appendix e e.5 supported storage device list brand info note & s test temp. (celsius) msata intel intel-310 ssdmaemc080g2 80gb silicon power sp128gimsa301sw0 128gb sata ssd transcend ssd370 ts64gssd370 64gb memxpro ssd m3a mi3ma1212802wn 128gb ssd m3a mi3ma1225604wn 256gb ssd m3a mi3ma1251208w...

  • Page 138

    130 ©vecow rcs-9000f gtx1080 user manual appendix f f appendix f : power supply installation test temperature (based on 95% humidity) 30ºc 35ºc 40ºc 45ºc 50ºc 55ºc 60ºc 3dmark 11 (v1.5.5.0) resolution 1920 x 1080 score x9489 x9465 x9414 x9233 x9014 x8839 x8521 highest temperature 77ºc 83ºc 86ºc 92ºc...

  • Page 139

    131 appendix f f.1.1 hep-600-24 adapter ac cable hep-600c-24 green black white l n f.1.2 hep-600-24 adapter dc cable hep-600c-24 -v -v v- +v +v v+.

  • Page 140

    132 ©vecow rcs-9000f gtx1080 user manual appendix f f.2.1 pws-600w adapter ac cable adapter (pws-600w) input l n ac power cord black white green adapter (pws-600w) 115 230 ac power cord 110v 220v 3 pin terminal block + - adapter (pws-600w) output v+ v- f.2.2 pws-600w adapter dc cable adapter (pws-48...

  • Page 141

    133 appendix f f.4.1 pws-360w adapter ac cable pws-360w power adapter on/off switch ac power cord ac 110v 115 ac 220v 230 f.4.2 pws-360w adapter ac cable pws-360w - - + + ** if more help is needed, please contact vecow technical support **.

  • Page 142

    For further support information, please visit www.Vecow.Com this document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or...