1. DL manuals
  2. Vecow
  3. PCI Card
  4. UE-1000
  5. User Manual

Vecow UE-1000 User Manual

Manual is about: PCI Express x4, 8 Ports/ 4 Ports USB 3.0 Expansion Card

Summary of UE-1000

  • Page 1

    User manual user manual 1.0.0 edition 20150213 ue-1000 pci express x4, 8 ports/ 4 ports usb 3.0 expansion card.

  • Page 2: Record of Revision

    Ii version date page description remark 0.9 01/20/2015 all preliminary release 1.0 02/13/2015 all offical release record of revision.

  • Page 3: Fcc

    Iii this manual is released by vecow co., ltd. For reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of vecow co., ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential da...

  • Page 4: Order Information

    Iv order information part number description ue-1004 pci express x4, 4 ports usb 3.0 expansion card ue-1008 pci express x4, 8 ports usb 3.0 expansion card.

  • Page 5: Table of Contents

    V table of contents 1 general introduction 1 1.1 overview 1 1.2 features 1 1.3 product specification 2 1.3.1 specifications of vecow ue-1004 2 1.3.2 specifications of vecow ue-1008 2 1.4 mechanical dimension 3 1.4.1 ue-1004 3 1.4.2 ue-1008 3 2 getting to know your ue-1000 4 2.1 packing list 4 2.2 i/...

  • Page 6: General Introduction

    1 general introduction general introduction ue-1000 is a series of usb 3.0 expansion cards which is powered by independent usb 3.0 host chips. With the latest usb 3.0 technology, ue-1000 series usb 3.0 expansion card delivers 10-times data transfer rate, up to 5gbps, to make performance driven plug-...

  • Page 7: 1.3 Product Specification

    2 general introduction ©vecow ue-1000 user manual 1.3 product specification 1.3.1 specifications of vecow ue-1004 usb interface pci express x4 chipset 4 renesas μpd720202 host controllers compliant with universal serial bus 3.0 specification revision 1.0 compliant with intel ® xhci specification rev...

  • Page 8: 1.4  Mechanical Dimension

    3 general introduction 1.4 mechanical dimension 1.4.1 ue-1004 1.4.2 ue-1008 9.5 (0.37”) 19 (0.75”) 167.65 (6.6”) 98.4 (3.87”) 21.1 (0.83”) 121 (4.76”) 180.44 (7.1”) unit: mm (inch) 167.65 (6.6”) 9.5 (0.37”) 21.1 (0.83”) 121 (4.76”) 180.44 (7.1”) unit: mm (inch) 98.4 (3.87”).

  • Page 9: 2.1 Packing List

    4 getting to know your ue-1000 ©vecow ue-1000 user manual getting to know your ue-1000 2.1 packing list 2 item description qty 1 ue-1000, pci express x4, 8 ports/4 ports usb 3.0 expansion card (according to the configuration you order.) 1 2 accessory box, which contains vecow drivers & utilities dvd...

  • Page 10

    5 getting to know your ue-1000 user-configurable 900ma and 1500ma current limit. 2.3.1 current limit jumpers 2.3 jumper setting for current limit jp1 jp2 jp3 jp4 jp5 jp6 jp7 jp8 jumper pin 900 ma 1-2 (default) 1500 ma 2-3.

  • Page 11: Getting Start

    6 getting start ©vecow ue-1000 user manual getting start 3.1 installing ue-1004/ ue-1008 3 step 1. Insert ue-1004/ ue-1008 golden finger and pci bracket into pcie socket carefully. Step 2. Make sure golden finger and pci bracket was inserted smoothly..

  • Page 12

    7 getting start step 3. Make sure the bracket aligns screw hole. Step 4. Fasten the m3 screw..

  • Page 13: 4.1 Driver Installation

    8 driver installation and setting ©vecow ue-1000 user manual driver installation and setting 4.1 driver installation system os: windows you can install the windows driver for vecow ue-1004 / ue-1008 manually by following the steps listed below : 4 step 1. Execute renesas-usb3-host-driver-30230-setup...

  • Page 14

    9 driver installation and setting step 2. Accept the terms of the license agreement and then go “next” step. Step 3. Click “install” to begin installation..

  • Page 15

    10 driver installation and setting ©vecow ue-1000 user manual step 4. Waiting for driver installation. Step 5. Click into “control panel” “device manager”. Check vecow ue-1004/ue-1008 driver setup success..

  • Page 16: 4.2 Power On/ Off Control

    11 driver installation and setting 4.2 power on/ off control ue-1000 series include usb port power on/off function and help to maintain on field operation. Step 1. Every power source of usb port are independent, we could on/off directly thought sw thread. The device control line is smbus that connec...

  • Page 17

    12 driver installation and setting ©vecow ue-1000 user manual step 3. Smbus io address mapping table.

  • Page 18

    13 driver installation and setting step 4. To access smbus register , below shows standard read/write scenarios. You refer to demo code that follow smbus protocol to complete the process. Void smbwrite(data_byte device_id, data_byte reg_no, unsigned char data) { data_byte err_no; writeabyte(smbus_ho...

  • Page 19

    14 driver installation and setting ©vecow ue-1000 user manual data_byte smbread(data_byte device_id, data_byte reg_no, unsigned char *dat) { data_byte err_no; writeabyte(smbus_host_status, 0xff); writeabyte(smbus_host_data0, 0x00); err_no = check_smbus_ready(); if (err_no != 0) return err_no; writea...

  • Page 20

    15 driver installation and setting step 5. Control usb port a. Access output port / input port b. Usb port on/off register = 0x02 reg.0x20 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 pe-1008 8 7 6 5 4 3 2 1 pe-1004 x 4 x 3 x 2 x 1 * if more help is needed, please contact vecow technical support.

  • Page 21

    For further support information, please visit www.Vecow.Com this document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, re...