Vectaire ELIX 1003 Installation and operating instructions manual

Manual is about: Energy Efficient Centrifugal Fan with EC Motor

Summary of ELIX 1003

  • Page 1

    Ipx4 elix 1003 • 3 speed continuous running • sap appendix q eligible • 3 models: - standard - timer - humidity control • for all domestic wet rooms • for walls or ceilings energy efficient centrifugal fan with ec motor installation and operating instructions.

  • Page 2

    "elix 1003” - centrifugal fans with ec motor installation and operating instructions this leaflet must be available to the user the product you have purchased is an extractor fan for exhausting directly outside or through longer lengths of ducting (up to 15m) and is suitable for wall or ceiling inst...

  • Page 3

    Warning: damage could be caused to the product if the installation instructions are not followed. • the product should not be used in an ambient temperature higher than 40°c (104°f). • the product should not be exposed to atmospheric agents (rain, sun, snow, etc.). • the product or its parts should ...

  • Page 4

    Elx1003hdt - 3 speed, continuous running fan. The fan runs continuously at the pre-selected lower speed, and the boost (speed 2) will start to operate automatically when the relative humidity (adjustable between 40% and 90% +/-5% tolerance) reaches the pre-set level and will continue to operate at t...

  • Page 5

    Installation 1 2 4 5 3 6 6.

  • Page 6

    7 8 9 10 7 installation.

  • Page 7

    11 12 8 installation elxs - 3 speed with cord wiring diagrams elxs - 3 speed via remote switch n.B when installing fans via a remote switch, pullcord switch must be left in "off" position and the cord removed..

  • Page 8

    9 jumper switch these fans are designed to run continuously at one of 2 lower speeds fixed at installation using the jumper switch. 12 14 13 15 elx1003 minimum speed jumper 1 elx1003 speed 2 jumper 2 elx1003dt elx1003hdt minimum speed jumpers 1 and 3. To disable delay-on timer remove jumper 3 elx100...

  • Page 9

    Dismantling & recycling this product has been designed and constructed using high-quality materials and components that can be recycled or re-used. Maintenance before any maintenance or cleaning operation, switch off the fan and disconnect it from the main power supply. The filter can be easily remo...

  • Page 10

    Cod. 5f12245: rev.1 elix 1003 190717 e & o.E vectaire ltd lincoln road cressex business park high wycombe buckinghamshire hp12 3rh tel: +44(0)1494 522333 fax: +44(0)1494 522337 email: sales@vectaire.Co.Uk web: www.Vectaire.Co.Uk vectaire ltd reserves the right to alter specifications as part of its ...