Vector BD032806 User's Manual & Warranty Information

Summary of BD032806

  • Page 1

    100 watt slim power inverter with usb charging port vec415 user’s manual & warranty information important safety information, save these instructions to reduce the risk of injury, user must read and understand this instructional manual. This manual contains important information regarding the operat...

  • Page 2

    Important safety instructions warnings to reduce the risk of fire, electric shock, explosion or injury: • do not connect to ac distribution wiring. • remove appliance plug from outlet strip or turn off inverter before working on the appliance. Multiple outlet power strips with switches and circuit b...

  • Page 3

    1 table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 controls and functions . . . . . . . . . . . ....

  • Page 4

    3 dc. The second stage is a mosfet bridge stage that converts the high voltage dc into 115 volts, 60 hz ac. The dc-to-dc converter stage uses creative, high frequency, zero voltage switching power conversion techniques that replace the bulky transformers found in less technologically advanced models...

  • Page 5

    5 4. Rotate the plug slightly to make sure there is good contact. 5. Push the on/off pushbutton to turn the unit on. 6. The led in the on/off pushbutton will light blue, indicating a proper connection. 7. If the inverter does not work, make sure the ignition/accessory switch is actually powering the...

  • Page 6

    7 common power output problems possible causes recommendations battery voltage recharge battery or check below 10.7 volts dc power supply. Equipment being operated reduce load to maximum 100 watts. Draws too much power inverter in thermal allow inverter to cool down. Ensure shutdown condition there ...