Vector Car Navigation system Quick Start Manual

Summary of Car Navigation system

  • Page 2

    After this the procedure will only take a few seconds, unless you travel by plane or change country continuously. The gps antenna is often located in the rear upper part of your device and must be directed towards the sky at all times. Placing your device in the seats will decrease the ability to fi...

  • Page 3

    When you first unpack your vector, it may only have a small amount of power. We recommend that you charge the device for 5 hours prior to setting it up. There are 3 charging options: 1- in car charger. Only use the one supplied with the vector device. Other makes may not work or even damage your dev...

  • Page 4

    > map screen zoom in back zoom out map tilt add selected point to favorites add selected point to itineraries lock/unlock map zoom lock/unlock map pan.

  • Page 5

    Navigate: if your vector is receiving a valid gps signal, the navigation mode will automatically be activated, allowing both visual & voice commands to guide you to your desired destination. If your vector has no valid gps signal (i.E. Indoors with no direct line of sight to the satellite receivers)...

  • Page 6

    If you have maps from more than one country on your vector, tap the flag in the top left hand corner of the screen & select the country you wish to search. > set your "home" location with ndrive, all text input can be simplified: ex: to select a town or city enter the name using the keyboard. If the...

  • Page 7

    > during navigation (dependent on “settings”) functions available during navigation current street name next street name menu current position lock/unlock map pan lock/unlock map zoom poi distance to the next maneuver type of maneuver time/distance information (press to toggle) subtitles: 1- increas...

  • Page 8: Incorrect Route Calculations

    My device cannot acquire a gps signal through the windscreen some vehicles have athermic (heat reflective) windscreens that can hinder the gps signal. In this case you should attach your device to a side window using the correct mount. If your vehicle does not have a heat reflective windscreen and y...

  • Page 9

    Vector stopped working after an update: before updating via ndrive agent it is strongly advised to make a backup of all files by copying them to your computer, by clicking the backup & restore button found on ndrive agent. Ndrive agent will make use of your internet connection, usb connection and a ...

  • Page 10

    Each country has a map data file identified by its initials and must always be located inside the "maps" folder of your ndrive. If the maps are not inside this folder they will not be recognized by ndrive application. Once installed, the map must be activated using the supplied serial number. For ad...