- DL manuals
- Vector
- Data Loggers
- GL3000 series
- User Manual
Vector GL3000 series User Manual
Summary of GL3000 series
Page 1
User manual gl3000/gl4000 series version 2.4 english.
Page 2
Imprint vector informatik gmbh ingersheimer straße 24 d-70499 stuttgart vector reserves the right to modify any information and/or data in this user documentation without notice. This documentation nor any of its parts may be reproduced in any form or by any means without the prior written consent o...
Page 3
User manual gl3000/gl4000 series table of contents © vector informatik gmbh version 2.4 - i - table of contents 1 introduction 3 1.1 about this user manual 4 1.1.1 certification 5 1.1.2 warranty 5 1.1.3 support 5 1.1.4 trademarks 5 2 gl3000/gl4000 series – overview 7 2.1 general information 8 2.2 co...
Page 4
User manual gl3000/gl4000 series table of contents © vector informatik gmbh version 2.4 - ii - 3.2 installation vector logger configurator 38 3.2.1 requirements 38 3.2.2 setup 38 3.2.3 overview 39 3.2.4 quick start 40 3.3 installation g.I.N. Configuration program 42 3.3.1 requirements 42 3.3.2 setup...
Page 5: 1 Introduction
User manual gl3000/gl4000 series introduction © vector informatik gmbh version 2.4 - 3 - 1 introduction in this chapter you find the following information: 1.1 about this user manual page 4 certification warranty support trademarks.
Page 6
User manual gl3000/gl4000 series introduction © vector informatik gmbh version 2.4 - 4 - 1.1 about this user manual to find information quickly the user manual provides you the following access helps: > at the beginning of each chapter you will find a summary of the contents, > in the header you can...
Page 7
User manual gl3000/gl4000 series introduction © vector informatik gmbh version 2.4 - 5 - 1.1.1 certification certified quality management system vector informatik gmbh has iso 9001:2008 certification. The iso standard is a globally recognized standard. 1.1.2 warranty restriction of warranty we reser...
Page 9
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 7 - 2 gl3000/gl4000 series – overview in this chapter you find the following information: 2.1 general information page 8 2.2 connectors page 9 overview main plug analog plug digital plug ethernet ...
Page 10: 2.1 General Information
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 8 - 2.1 general information gl3000 the gl3000 is a data logger with usb and ethernet interface which processes can messages with either 11-bit or 29-bit identifiers, remote frames, lin messages an...
Page 11: 2.2 Connectors
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 9 - 2.2 connectors 2.2.1 overview general information the loggers have the following connectors: front: > 1 card drive for compact flash cards (for gl3000 , gl3100 and gl4000 only) > 1 slot for re...
Page 12
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 10 - 2.2.2 main plug dsub50 pin assignment the pins of the main plug (dsub50, male) have the following meaning: pin assignment pin assignment 1 flexray1+ 26 can3 vbatt 2 flexray1- 27 can3 gnd 3 gn...
Page 13
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 11 - lin the lin channels are supplied with maximum 12 v from the supply voltage of the data logger. If the reference voltage for a lin channel is higher than 12 v, this voltage (e.G. 24 v) must b...
Page 14
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 12 - 2.2.3 analog plug dsub25 pin assignment the pins of the analog plug (dsub25, male) have the following meaning: pin assignment pin assignment 1 anain7+ 14 anain7- 2 anain8+ 15 anain8- 3 anain9...
Page 15
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 13 - 2.2.4 digital plug dsub25 pin assignment the pins of this digital plug (dsub25, female) have the following meaning: pin assignment pin assignment 1 reserved 14 digin1 2 digout1 15 digin2 3 di...
Page 16
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 14 - 2.2.5 ethernet connections ethernet connector one 10/100 mbit ethernet connection is located on the front, and two 10/100 mbit ethernet connections on the back with the following meanings: fr...
Page 17
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 15 - 2.2.7 aux connections aux connection the two additional 5-pin plug connections (connector series 711) aux are intended for the connection of the following logger accessories: > logview (exter...
Page 18
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 16 - 2.2.8 event connection event connection this plug is used for the connection of the switch box e2t2l with two buttons and two leds, which is included in the scope of delivery. The buttons and...
Page 19: 2.3 Bus Systems
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 17 - 2.3 bus systems 2.3.1 can can channels the loggers support 9 can channels. Channel 1 - 4 freely configurable via piggyback pcbs channel 5 - 8 permanently occupied by high-speed can transceive...
Page 20
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 18 - info: for the galvanically decoupled transceiver, power supply (can1/2/3/4_vbatt) and ground (can1/2/3/4_gnd) must be connected separately. Replacing piggybacks the piggybacks can be exchange...
Page 21
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 19 - layout gl3000/gl4000 series figure 1 – layout gl3000 / gl4000 series 2.3.3 lin lin channels lin frames can be recorded with both internal lin channels. The sending of lin frames is not suppor...
Page 22
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 20 - 2.3.4 flexray flexray channels the loggers of gl4000 series also support flexray: > 2 flexray channels a and b of a cluster for rx/tx, that means with xcp on flexray or > 2 flexray channels a...
Page 23: 2.4 Functions
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 21 - leds at the gla150 six leds are available. With these leds the following states can be displayed: led color description power green device is running. Communication green data connection to t...
Page 24
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 22 - 2.4.2 automatic switch on and off the logger (sleep / wake-up / standby) power management for permanent use in vehicles the loggers are connected to the vehicle battery permanently. Due to th...
Page 25
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 23 - removable ssd the gl3200 and gl4200 supports a 64 gb or 512 gb removable ssd (2.5 inch sata solid state disk) which is available as accessory. The ssd can be removed and read out very quickly...
Page 26
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 24 - 2.4.4 digital input digital input the loggers support eight digital inputs. A digital input can be used e.G. As external trigger. In unconnected state the digital inputs are set to high (true...
Page 27
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 25 - 2.4.6 analog inputs analog inputs the logger has six independent analog inputs which can be configured separately. Input 1 - 4 are freely disposable. Inputs 5 and 6 are hard wired internally ...
Page 28
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 26 - 2.4.7 leds, display, keys leds the five logger leds are freely programmable. They can be used to display different states. Display the loggers (except gl3000 ) feature an eight-position alpha...
Page 29
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 27 - update firmware and configuration the update is proceeded in several steps that are displayed on the display and via the leds as follows: note: during the complete update the logger must not ...
Page 30
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 28 - display leds description netfail running light general communication error, e.G. A cable was unplugged. * : the display and the leds can be overwritten by user-defined settings. Event keys th...
Page 31
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 29 - 2.4.11 real-time clock with battery real-time clock the loggers have an internal real-time clock, which is battery supplied, and thus continues running even if the logger is disconnected from...
Page 32
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 30 - 8. Insert the ribbon cable of the membrane keypad with the wide wire oriented to the middle of the board into the plug and lock it (not in the case of gl3000 ). Then attach the flat ribbon ca...
Page 33
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 31 - usb mode if the usb cable is connected during this waiting time, the logger will switch to usb mode and the display shows usb mode . The leds still show the running light from the right to th...
Page 34
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 32 - technical data wireless lan ieee 802.11g / 54 mbit/s encoding algorithms wep and wpa/wpa2 security protocol (full version of ml server only) eap/tls, tkip, radius 2.4.15 3g overview the logge...
Page 35
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 33 - configuration vector logger configurator v2.5 or higher canape for seed & key only alternative: canape v8.0 or higher for daq mode, seed & key canape v13.0 or higher for polling mode a2l file...
Page 36: 2.5 Technical Data
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 34 - 2.5 technical data channels 1 9 can channels - can 1 - 4 via piggybacks - can 5 - 8 fix via tja1043 - can 9 fix via tja1042 2 lin channels fix viatja1021 2 flexray channels fix via tja1080 (f...
Page 37: 2.7 Accessories
User manual gl3000/gl4000 series gl3000/gl4000 series – overview © vector informatik gmbh version 2.4 - 35 - 2.6 included with delivery standard scope of delivery > gl3000 or gl3100 or gl3200 or gl4000 or gl4200 logger > vector logger configurator on cd > vector logging exporter on cd > g.I.N. Confi...
Page 39
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 37 - 3 installation configuration programs in this chapter you find the following information: 3.1 overview page 38 3.2 installation vector logger configurator page 38 requirements setup overv...
Page 40: 3.1 Overview
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 38 - 3.1 overview overview this instruction describes the installation of the software package for the gl3000 / gl4000 series containing: > vector logger configurator graphic user interface fo...
Page 41
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 39 - 2. Please, follow the instructions in the setup program to complete the installation. 3. After successful installation, the vector logger configurator can be found in the start menu (if s...
Page 42
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 40 - cross reference: the vector logger configurator is described in detail in the user manual of this configuration program. The user manual is available as pdf and can be opened via the vect...
Page 43
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 41 - set the real-time clock the following example describes how to set the date and the time of the logger. Before delivery the loggers are set to cet. 1. Connect the logger via a console cab...
Page 44
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 42 - 3.3 installation g.I.N. Configuration program overview this instruction describes the installation of the g.I.N. Configuration program for the loggers containing: > g.I.N. Configuration p...
Page 45
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 43 - main features are: > customizable filters for can, lin and flexray messages > customizable complex triggers > support of can databases (dbc) and lin databases (ldf) > support of flexray d...
Page 46
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 44 - 3.3.4 quick start quick start follow the instructions below to configure the logger with a compact flash card, start logging and readout logging data. Configuration with a ssd is performe...
Page 47
User manual gl3000/gl4000 series installation configuration programs © vector informatik gmbh version 2.4 - 45 - 16. Start the multi logger cardreader program. 17. Select the drive of the card reader and press the [read] button. A folder with the name of the vehicle is created in the global data dir...
Page 49: 4 Index
User manual gl3000/gl4000 series index © vector informatik gmbh version 2.4 - 47 - 4 index 3 3g ....................................................................... 32 a analog inputs ...................................................... 25 analog plug ..............................................
Page 50
User manual gl3000/gl4000 series index © vector informatik gmbh version 2.4 - 48 - transceiver ......................................................... 17 u ups ..................................................................... 28 usb ................................................................
Page 52
More information > news > products > demo software > support > training classes > addresses www.Vector.Com.