Vec021/021ac 4140 s.W. 28th way ft. Lauderdale, fl 33312 industrial series ™ 900 jumpstart system & power supply portable, cordless, rechargeable 12-volt dc* power supply owner’s manual *includes instructions for 110-volt ac power option (model vec023 inverter: included with model vec021ac; not incl...
Table of contents features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Warnings warning statements identify conditions or practices that may result in personal injury or loss of life. • when working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency. • always use protective eyewear when using this product: cont...
Congratulations on selecting the vector™ industrial series™ 900 jumpstart system & power sup- ply . Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit or items that you are using it with. In addition to a built-in 12-volt power supply, the industri...
Important information: caution : read instruction manual and product labeling carefully, for complete instructions, before using this product. Follow recommended warnings, cautions, and safety procedures, and manufacturer guidelines for your vehicle battery. • important: although this unit is delive...
2. Using the industrial 900™ as a jumpstart system cautions: • before using this system to jump start any vehicle or boat, read and understand all instructions, safety tips, warnings and cautions, and first aid information provided in this manual and on the product labeling. Additional important inf...
Note: in the rare event that the vehicle to be started has a positive grounded system (positive battery terminal is connected to chassis): replace steps i and 2 above with the following steps, and then proceed to steps 4-6 above. 1. Connect negative (-) black clamp to vehicle battery ‘s negative ter...
5.1 to use the industrial 900™ system as a 12-volt dc portable power supply 1. Note: make sure that the unit ‘s safety on/off switch is always in the off position when using the 12-volt dc accessory outlet. 2. Lift up the cover of the unit ‘s 12-volt dc cigarette lighter-type receptacle. 3. Insert t...
8. Optional vec023 power force 150™ watt inverter for use with the industrial series™ 900 jumpstart system & power supply : vec023 power force 150™ inverter —included with model vec021ac; and sold separately as an optional accessory for use with model vec021. Note: the following information applies ...
Example: if a load is rated at 100 watts, the power source must be able to deliver: 100 ÷ 10 = 10 amperes caution : the power force 150™ must only be connected to batteries with a nominal output voltage of 12-volts dc. The unit will not operate from a 6-volt battery and will sustain permanent damage...
8.3.5 placement of the power force 150™ for best operating results, the inverter should be properly installed (as directed in this manual) in the industrial 900™ . The combined unit should only be used in locations that meet the following criteria: dry—do not allow water or other liquids to come int...
Vector power force 150 ™ power inverter product specifications maximum continuous power . . . . . . . . . . . . . . . . . . . . . 150 watts surge capacity (peak power) . . . . . . . . . . . . . . . . . . . . . . 300 watts maximum efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Cut here ✄ 18 19 1 year limited warranty registration form this vector manufacturing, ltd. Product is warranted to the original purchaser only, for one year from the date of purchase, to be free of defects in materials and workmanship. In no event will vector manufacturing, ltd. Be responsible for a...
