Vector RECHARGEABLE LAMP User Manual
Indoor/Outdoor
RECHARGEABLE LAMP
VEC1376RL
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4
If you suspect the bulb is burned out, check if the lamp will operate when powered
using the AC charger/adapter. If Low brightness is selected and the bulb won't
light, it probably needs to be replaced.
You will need a new replacement bulb (Vector part VEC193)*. The globe assembly
that contains the bulb is in two halves. To remove the top half of the globe, the three
flanges under the shade must be unscrewed from the three supports that fasten the
shade to the globe. They can be removed without tools.
1. Make sure the lamp is turned OFF.
2. Reach under the shade and unscrew (counterclockwise) all three flanges until they
slide down the supports.
3. Lift off the shade and top half of the globe and set them aside.
4. Using a cloth, grasp the bulb, pull it straight up and dispose of it properly.
5. Using a clean cloth, remove the bulb from its package. Avoid touching it with
bare skin.
6. Note the two pins and the small holes on the bulb socket.
7. Insert the two pins of the bulb into the socket and make sure they are fully seated.
8. Briefly turn on the lamp to test operation of the new bulb.
9. Locate the shade and top half of the globe and reattach the flange threads (one
at a time) in the shade`assembly.
10. Continue to tighten (clockwise) so the globe is secure. DO NOT OVERTIGHTEN!
• A high quality, G4 base, 6 volt, 10-watt bulb may be used if a VEC193 bulb is not available.
SPECIFICATIONS
Power:
AC charger/adapter 110 volt AC to
7.2 volt DC 1650 mA.
UL Listed class 2 power supply
Battery:
VEC1996 volt 6 Amp Hour, sealed lead-acid
Bulb:
VEC193 (See Note)
Weight:
4.75 lbs (2.15 kg)
Height:
13.75 in (34.9 cm)
Shade Diameter:
9.25 in (23.5 cm)
Base Width/Depth:
6.0 in (15.24 cm)
SHADE
SUPPORTS
FLANGE
www.vectormfg.com
4140 S.W. 28th Way, Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
© 2005 VECTOR MANUFACTURING, Ltd.
FT. LAUDERDALE, FL 33312
MADE IN CHINA
VEC1376RL_Manual_030405 3/4/05 6:11 PM Page 4