Vector TLC3-FCR Engineering Manual
TLC3-FCR Engineering Manual
Doc: 70-00-0198, V3.0 Date: 20120403
© Vector Controls GmbH, Switzerland
Page 1
Subject to alteration
TLC3-FCR
Intelligent Fan Coil Controller
Features
The PWM control option reduces room temperature
fluctuations and energy consumption
Low power energy consumption: < 1W per unit
Temperature control for 2-pipe fan coil systems.
Automatic fan control for three stage fans.
Cost saving option with Economy functionality and set point
limitations
Control for single stage heating, cooling and fan only
operation modes
Password protected programmable user and control
parameters
o
Setpoint range limitation
o
Access control for setpoints, fan speeds and mode
change
o
Access control for heat/cool change and time
programs
o
Select your display contents
o
Selectable behavior after return from power failure
Temperature display in Celsius or Fahrenheit
Deluxe Version:
Clock and time schedule functions with power failure protection
Blue backlight for LCD
Infrared remote controller option:
With special features for Boost and delayed switching on or off
Applications
Air Only Systems: Three stage fans for single duct systems with up to one binary output for auxiliary heating
and cooling devices.
Air/Water Systems: Induction units, fan coil units for 2-pipe systems with one binary output for a spring
return valve.
General Description
The TLC3-FCR is a stand-alone electronic fan coil controller with one control loop. The TLC3-FCR features 1 internal
NTC temperature sensor and four binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TLC3-FCR can be configured
using the standard operation terminal. No special tools or software is required.
Ordering
Item Name
Item code
Variant
Power
Features
TLC3-FCR-24
TLC3-FCR-24-W01
40-10 0128
40-10 0128-01
Standard
Cooling only
24VAC/DC
Fan coil controller with:
1 TI internal
3 DO (Relay) Fan control
1 DO (Relay) Binary valve control
TLC3-FCR-230
TLC3-FCR-230-W01
40-10 0110
40-10 0110-01
Standard
Cooling only
230VAC
TLC3-FCR-D-24
TLC3-FCR-D-24-W01
40-10 0133
40-10 0133-01
Deluxe
Cooling only
24VAC/DC
TLC3-FCR-D-230
TLC3-FCR-D-230-W01
40-10 0111
40-10 0111-01
Deluxe
Cooling only
230VAC
Selection of actuators and fans
Binary auxiliary devices: E.g. fans, on/off valves, etc. Do not directly connect devices that exceed 2(1.2)A. Observe
startup current on inductive loads! Do not connect more than one fan coil unit to one controller.