Vector VEC012AP Owner's Manual & Warranty Information

Manual is about: JUMP-START SYSTEM 12 VOLT DC POWER SUPPLY

Summary of VEC012AP

  • Page 1

    Cut here ✄ two year limited warranty program this limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of vector manufacturing, ltd., regarding this product. There is no other warranty, other than those described herein. This vector manufa...

  • Page 2: Jump-Start System

    Cut here ✄ vec012ap owner’s manual & warranty information this manual contains important information regarding safety, operation, maintenance and storage of this product. Before using, read and understand all cautions, warnings, instructions and product labels, plus your vehicle’s battery manufactur...

  • Page 3

    1 contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 2. Using vector jumper as a jump-start system . . . . . . . . . 6 2.1 easy, step-by-step jump-starting instructions . . . . . . . . . . . . . 7 3. Charging/recharging . . . . . . . . . . . . . . . . . ...

  • Page 4

    2 safety information warning: (warning statements identify conditions or practices that may result in personal injury or loss of life) 1) when working with lead acid batteries, always make sure immediate assitance is available in case of accident or emergency. 2) always use protective eyewear when u...

  • Page 5

    3 caution: caution statements advise against certain conditions and practices that may result in damage to vehicles, appliances and/or the jump-starter. Important: although this unit is delivered in a partially charged state, you must fully charge it with the supplied 110/120 volt ac charger for a f...

  • Page 6

    4 introduction congratulations on selecting the vector ® jump-starter and 12 volt dc power supply. This compact jump-starter is unique in the amount of energy it can supply for its size. The internal battery is a high density sealed, lead-acid battery that stores and delivers energy comparable to fu...

  • Page 7

    5 figure 1a (front view) figure 1b (rear view) 1. Reverse connection indicator 2. Good connection indicator 3. 12 volt dc accessory socket with 20 amp overload protection 4. Battery level push button 5. Led charging/battery level indicators 6. Heavy-duty welding quality jumper cables 7. Heavy-duty 4...

  • Page 8

    6 use as a jump-start system warning: 1. Before using this system to jump-start any vehicle or boat, read and understand all instructions, safety tips, warnings, cautions and first aid information pro- vided in this manual and on the product labeling. Additional important infor- mation may also be p...

  • Page 9

    7 2.1 easy, step-by-step jump-starting instructions this jump-starter is equipped with an automatic on/off that only allows jump- start energy to flow when proper connections are made to battery and frame. The automatic on/off works in conjunction with an audible reverse polarity alarm and a large r...

  • Page 10

    8 • always use protective eyewear when using this product: contact with battery acid may cause blindness and/or severe burns • keep out of children’s reach. • always store battery clamps in holsters when not in use. First aid • skin: if battery acid comes in contact with skin, rinse immediately with...

  • Page 11

    9 warning: do not recharge for more than 3-4 hours maximum using 12 volt dc method 3.2 12 volt dc charging 1. Insert one end of the dc/dc charging adapter into the 12 volt dc accessory receptacle on the vehicle or boat. 2. Insert the plug at the other end of this charging adapter into recharging por...

  • Page 12

    10 5. Emergency worklight the worklight is controlled by an on/off switch. Make sure the lamp is turned off when the unit is being recharged or stored. 6. Replacement parts for replacement parts (bulbs, batteries, fuses, etc.), contact vector customer service: (954) 584-4446 or toll-free (866) 584-5...