Vector VEC246 Owner's Manual & Warranty - Introduction

Manual is about: THERMOELECTRIC TRAVEL COOLER/WARMER 12-VOLT DC

Summary of VEC246

  • Page 1

    © 2003 vector manufacturing, ltd. 4140 s.W. 28th way, ft. Lauderdale, fl 33312 ab060303.

  • Page 2: Owner’S Manual

    Vec246 owner’s manual & warranty information this manual contains important information regarding safety, operation, maintenance and storage of this product. Before using, read and understand all cautions, warnings, instructions and product labels. Failure to do so could result in possible injury or...

  • Page 3: Introduction

    1 introduction thank you for choosing the vector thermoelectric travel cooler & warmer, one of the most advanced, state of the art units on the market today. Please read this manual carefully before use to ensure optimum performance and avoid damage to the unit itself or power sources that it operat...

  • Page 4: Features

    The travel cooler & warmer can be used with most food and beverages, either cold or hot. Use with standard household containers or ready-to-use food and drink packaging. Ideal as a cooler, for: cooler , for: • beverages sodas, beer, wine, juice, milk, iced tea or coffee, shakes, thirst quenchers, wa...

  • Page 5: Cautions:

    3 cautions: • this unit is intended for use with a 12-volt dc power source that can provide at least 4 amperes of current. Do not attempt to use with any other power source. • never operate unit in an enclosed space. Always ensure that there is adequate ventilation and free flow of air around the un...

  • Page 6: Cautions:

    4 using the travel cooler/warmer as a cooler connecting to a vehicle's 12-volt dc accessory outlet, for extended use: 1. Make sure that the unit's warm/off/cool switch is in the off (center) position. Start vehicle, or turn ignition to accessory position. 2. Open the power cord hatch and remove the ...

  • Page 7: For Use Away From Vehicle

    5 using the travel cooler/warmer as a warmer - follow the procedures for cooling except that the switch is set to warm. - the red warm led will light when the unit is warming. - follow all food handling warnings and cautions. - the maximum temperature for warming is 130 degrees f. - follow all opera...

  • Page 8: Fuse Replacement

    6 fuse replacement if the dc socket is powered, but the unit does not operate, then the cooler/warmer fuse may be open. The power cord is fuse-protected against short-circuiting, by a 10- amp fuse located in the tip of the dc accessory plug. To inspect or replace the dc power cord fuse 1. Unscrew th...

  • Page 9: Troubleshooting

    7 troubleshooting problempossible cause/remedy • travel cooler/warmer is not functioning as cooler or warmer (fan is not turning) • accessory outlet of dc power supply is not functioning -check by plugging in a 12vdc appliance. If not, clean accessory outlet and re-connect the travel cooler/warmer ....

  • Page 10

    8 2 year limited warranty program this limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of vector manufacturing, ltd., regarding this product. There is no other warranty, other than those described herein. This vector manufacturing, lt...