1 vec255 owner’s manual & warranty information this manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read and understand all cautions, warnings, instructions and product labels. Failure to do so could result in injury and/or prop...
2 2 important safety information be sure to read and understand all warnings and cautions before using this product. Please read this guide carefully before use to ensure optimum performance and avoid damage to the system or items that you are using it with. Failure to follow instructions may cause ...
3 internal battery. For immediate use, attach the dc adapter and operate the appliances from an external 12 volt dc source. 4. To avoid over-inflation, carefully follow instructions on articles to be inflated. 5. Never leave appliances unattended while in use. Allow appliance to cool for five minute...
4 4 1. Introduction congratulations on selecting the vector air pro™ model vec255 compressor & inflator combo. This system is an advanced high-pressure (up to 260 psi) multi-use air compressor system with unique features that set it far above the value and utility of ordinary compressors for mobile ...
5 nozzle hatch cover nozzles pressure gauge the compressor on/off switch controls operation of the compressor. It conveniently is depressed and released to control inflation. An exact pres- sure is obtained by observing the gauge and releasing the trigger when the correct pressure is achieved. For l...
6 6 3. Attaching the compressor’s air hose the air hose is supplied as a separate item from the compressor body. The hose has a ribbed brass fitting at one end and a standard tire chuck at the other end. To use the hose it must first be connected to the compressor outlet. Loosen the hose retaining r...
7 the dc power adapter has a fused dc plug and connecting cord stored inside the dc power adapter. To use the dc power adapter, first remove the dc plug from it’s storage in the adapter. Deploy the cord from storage, and connect the dc power adapter to the compressor. Make sure it snaps into positio...
8 8 figure 4 to remove the battery pack from the appliance body for charging: make sure the trigger switch is off. Press both battery pack release buttons at the same time. Pull the battery pack down away from the appliance body. Insert the barrel connector of the ac adapter into the battery pack’s ...
9 5. Observe pressure with the pressure gauge. 6. When desired pressure is reached, open thumb latch and remove connector from valve stem. 7. Turn off compressor power switch important: always leave the tire chuck thumb latch in the open position when storing unit. 6.2 inflate other articles (withou...
10 10 7. Typical inflation times for compressor use the following are approximate pressure and inflation times for various items. Warning: always follow tire manufacturers recommendations for pressure on item to be inflated. Vehicle and trailer tires tire size ................... Pressure .............
11 8.1 inflating 1. Connect the inflator/deflator to either the battery pack or the dc power adapter. 2. Be sure the appropriate nozzle head is attached to the tapered inflating port of the inflator/deflator unit. Push the nozzle onto the inflation port to attach. The inflating port can be identifie...
12 12 always recycle prba prba 11. Battery disposal contains a maintenance-free, sealed, non-spillable, lead acid batter y, which must be disposed of properly. Most states require recycling-contact your local municipal authority for information. Non-spillable sealed lead-acid battery, must be recycl...
13 120 day limited warranty registration form this vector manufacturing, ltd. Product is warranted to the original purchaser only for 120 days from the date of purchase, to be free of defects in materials and workmanship. Vector manufacturing, ltd. Disclaims any liability for consequential damages. ...
14 14 3 year extended warranty registration form this limited warranty program is the only one that applies to this product, and it sets forth all the responsibili- ties of vector manufacturing, ltd., regarding this product. There is no other warranty, other than those de- scribed herein. This vecto...
15.
16 16 © 2003 vector manufacturing, ltd. Ft. Lauderdale, fl 33312 made in china.
