Vector VEC550POB Owner's Manual & Warranty - page 10
11. Make the connections to the FUSE HOLDER and battery terminal
12. Do not install fuse yet.
13. Connect the Negative cable ring terminal to the battery NEG terminal.
14. Insert the fuse into the fuse holder. There may be momentary
sparking.
15. Check all connections and tighten any loose connections.
16. Turn ON the inverter and apply a test load to the AC outlets.
Any questions please contact Power on Board Technical Support at:
(954) 584-4446 EXT. 119 for professional direction.
SERVICE AND REPLACEMENT PARTS
FUSES
It is recommended but not required since there is internal fuse protection
that the user use an external inline ANL 300 fuse and fuse holder(not
supplied). The fuse holder, and the ANL-300 fuse (not supplied) can be
purchased at most electrical supply companies.It is also recommended that
an Automotive Electrician be used to install this cable.
Any questions please contact Power on Board Technical Support at:
PH: 954-584-4446 • TOLL FREE: 866-584-5504 • FAX: 954-584-5556.
10