Owner’s manual on-line ® 1650 f i t n e s s.
T he vectra on-line ® 1650 is designed to provide years of trouble-free service with minimal routine maintenance. You can be confident of continued top quality performance by carrying out the following periodic inspection. Perform the following safety check daily: 1. Inspect cables, cable ends and n...
Vectra on-line ® 1650 cable diagram note: the pulleys on this diagram are numbered to make the installation of new cables as easy as possible. Simply start threading the cables through the pulleys beginning with the lowest number and working up. For example, if you are installing an entire set of ca...
Assembly instructions 3. Assemble the press arm support (a) to the main frame (b). (3/8-16 x 1/2 hex screws, qty. 4). Fig. 1. 4. In preparation for threading the cable, position the main column (c) on the right of the main frame (b), and the leg/ab station (d) on the left. Lay these parts down as sh...
Assembly instructions (cont.) 7. Now bolt the press arm lever (i) to the stack column (f) through the bearings. (1/2-13 x 1 button head screws, qty 2). Tighten very tight with 5/16" hex key. Allow the wheels on the bottom of the press arm lever to rest in the "v" of the press arm support. Attach pul...
Assembly instructions (cont.) 12. Bolt the leg seat handle/strut/leg developer pivot assembly (k) to the leg/ab seat bottom (m) (1/4-20 x 3/4 hex screws, qty 4). Attach this assembly to the leg/ab station (d) such that the hooks on the end of the strut go into the rectangular hole on the top of the ...
16. Connect cables to cross chest fly cams. Use plastic hole-plugs in keyholes to prevent disconnection. Fig. 10a. 17. Install seat bottom (r) (1/4-20 x 3/4 hex screws, qty. 2). Note: if you are installing a leg/calf press option, there are seat handles which install under seat bottom (r). See instr...
Assembly instructions (cont.) 21. Next tension the cable system. Two adjustments are necessary, one for the ab/leg/press arm stations and one for the fly/high pulley/low pulley stations. The adjustment at the top of the leg/ab station is adjusted first, but first check something at the base of the m...
Vectra on-line ® 1650 limited warranty v ectra fitness, inc. Warrants, to the original owner only, this vectra on-line 1650 to be free from defects in materials and workmanship for component specific periods as outlined below. Purchaser must retain bill of sale to establish warranty rights. This lim...
