Vectra Fitness VX-38 Owner's Manual
V
ectra Fitness, Inc. warrants, to the original owner only, this Vectra VX-38 to be free from defects in materials and workmanship for component specific periods as
outlined below. Purchaser must retain bill of sale to establish warranty rights. This Limited Warranty applies to sales occurring on or after November 1, 2006. Machines
purchased prior to November 1, 2006 are covered under a different warranty in effect at the time of sale. This Limited Warranty is valid only if machine is purchased
from a Vectra authorized dealer. Defective parts will be repaired or replaced at Vectra’s option, when returned to Vectra Fitness, Inc. shipping prepaid with prior
authorization. No allowances for labor will be made.
Warranty Period: (All periods are from date of purchase by original consumer)
Home Use:
Structural Frame . . . . . . Lifetime
Bearings . . . . . . . . . . . . . . . . . . . . 5 years
Weight Stack . . . . . . . . . 5 years
Cables and Cable Attachments. . . 3 years
Guide Rods . . . . . . . . . . . 5 years
Upholstery . . . . . . . . . . . . . . . . . . .3 years
Pulleys . . . . . . . . . . . . . . .5 years
Other parts not listed . . . . . . . . . . 3 years
Home Use is defined as use in a family’s home by the members of that family. Lifetime means while owned by the original owner.
Commercial / Institutional Use:
Structural Frame . . . . . . . 5 years
Bearings . . . . . . . . . . . . . . . . . . . . 1 year
Weight Stack . . . . . . . . . .5 years
Cables and Cable Attachments. . . 1 year
Guide Rods . . . . . . . . . . . 5 years
Upholstery . . . . . . . . . . . . . . . . . . .1 year
Pulleys . . . . . . . . . . . . . . . 5 years
Other parts not listed . . . . . . . . . . 1 year
Commercial/Institutional Use is defined as any use other than Home Use.
Conditions and Exceptions: Failures due to misuse, abuse, neglect, alteration, improper assembly, repairs other than by an authorized Vectra Service Center, normal
wear, damage or lack of maintenance are not covered. Use of a weight stack that is heavier than the heaviest stack that Vectra Fitness sells for use on the machine
voids this Limited Warranty. This Limited Warranty does not cover damages sustained during shipment. Title passes to buyer upon delivery to carrier. If product is
damaged in transit, file claim with carrier.
Repairs to the Structural Frame and Weight Stack will be made only if such repairs are necessary to make the machine functional as designed. Repairs for other reasons
will not be made. Cosmetics are not covered by this Limited Warranty. This is a powder coated steel product, and as such rust-resistant in most settings. Any rusting
and/or corrosion is completely outside the scope of this Limited Warranty. Owners who live in humid climates or intend to install this machine in a humid area such as
outside, near a pool, hot tub, or sauna should apply an automotive wax to delay rusting. The corrosive effects of sweat, cleaners, body lotions, sunlight, etc. are also
the responsibility of the owner.
It is our policy to repair or replace components rather than entire machines or assemblies. It is also our policy to repair rather than replace frame components. Repairs of
structural parts will be made using appropriate technology and may be visible. Repaired items will be refinished as needed, but the new finish may not match the old.
Replacement and Repair Expenses: Vectra Fitness will provide only replacement parts or repair to parts under this Limited Warranty, and will pay for standard ground
shipping of such parts to the consumer. The owner of the machine is responsible for all other costs. Such costs may include, but are not limited to: labor charges for
service, removal, repair, and re-installation of the Vectra product or any component part; shipping, delivery, handling, and administrative charges for returning parts to
Vectra; all necessary or incidental costs related to installation of the repaired or replacement part.
Claim Procedure: Please contact the Vectra authorized dealer from whom you purchased your machine should warranty service be required. Items returned to Vectra
without prior factory authorization or freight collect will not be accepted. Vectra assigned RMA number MUST be prominently shown on OUTSIDE of carton. Copies of
original bill of sale MUST accompany any merchandise returned for warranty service. Also each returned item must be accompanied by the following information: RMA
number assigned by Vectra, product serial number, description of problem experienced, and instructions for return of repaired/replaced part. Parts should be shipped
to Vectra Fitness in their original carton or equivalent packaging. Vectra Fitness will not be responsible for any loss or damage incurred in shipping.
No other express or implied warranties have been made or will be made on behalf of Vectra Fitness with respect to any Vectra product or the operation, repair or
replacement of any Vectra product. Vectra Fitness shall not be responsible for injury; loss of use of the Vectra product; inconvenience; loss or damage to personal
property; whether direct or indirect; or for incidental or consequential damages. This Limited Warranty is LIMITED STRICTLY to the terms stated herein and no other
express warranties or remedies shall be binding on us. THIS LIMITED WARRANTY AND ALL WARRANTIES WHICH MAY BE IMPLIED UNDER STATE LAW, INCLUDING,
BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, EXPIRE WITH THE TRANSFER OF OWNERSHIP
FROM THE ORIGINAL OWNER. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE SHALL BE LIMITED TO ONE YEAR
FROM DATE OF PURCHASE. REPAIR OF THE PRODUCT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. IN NO EVENT
SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, FOR BREACH OF THIS LIMITED WARRANTY, OR ANY OTHER WARRANTY EXPRESS OR IMPLIED.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion of incidental or consequential damages, so the above limitations
or exclusions may not apply to you.
Consumers Rights: This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Vectra Fitness, Inc.
19021 80th Avenue South
Kent, WA 98032 U.S.A.
www.vectrafitness.com
Protected by one or more of the following Patent Numbers: RE34,572; 4,900,018; 4,986,538; 5,336,148; 5,378,216; 5,395,295; 5,462,510; 5,605,523; 5,672,143; 5,779,601;
6,482,135; 6,508,748; 6,582,346; 6,994,660; D320,246; D320,247; D320,248; D329,563; D454,168; D457,581; D460,508; D462,731; CN1,309,738; CN2,023,972; J3,117,451.
Other U.S. and foreign patents pending. Vectra, On-Line and Cornerstone are registered trademarks of Vectra Fitness, Inc. Series VX, ARC (Automatic Ratcheting Cam),
AL (Arm-Leg), Vector, and VFT are trademarks of Vectra Fitness, Inc.
PN 67440 Rev. 11/06
©2006, Vectra Fitness, Inc.
Vectra VX-38 Limited Warranty
V e
ctra VX-38 Cable Diagrams
V
ectra Fitness gyms are designed to provide years of trouble-free service with
minimal routine maintenance. You can be confident of continued top quality performance
by carrying out the following periodic inspection.
PERFORM THE FOLLOWING SAFETY CHECK DAILY:
1.
Inspect cables, cable ends and nylon jacket very carefully. Refer to W
arning Label for
specific information on inspecting cables. This same information is repeated in this
manual and on your exercise chart. Replace any damaged or worn cables.
Annual
cable replacement (semiannual in multi-user settings) is strongly recommended as
an additional precaution. The rate at which cables wear depends on many factors
including: repetitions, weight setting, misuse, abuse, etc. Because of this, periodic
cable replacement is not a sufficient safeguard against unexpected breakage. Nothing
short of a thorough, careful daily inspection constitutes an adequate safety program.
PERFORM THE FOLLOWING CHECKS WEEKLY:
1.
Inspect frame and pulley bolts for tightness. Tighten if necessary
.*
2.
Inspect cable attachments (short and long single handles, double handles, lat or curl
bars, ankle strap, foot strap, triceps strap, sport handles such as racquet sports, golf,
or baseball, ab strap, squat attachment, etc.) carefully. Look for damaged mounting
eyes, springs, latches, etc. Inspect the webbing for fraying and check that the stitching
is intact and strong. Inspect all joints, fixed and pivoting. Make sure any bolts are
tight and that all retaining rings are intact and in good condition. Inspect any bearings.
Replace any damaged or worn items.
3.
Inspect weight selector pin for proper fit and retention in selector shaft. Replace impro-
perly functioning pin (or other stack components) with Vectra replacement parts only
.
4.
Inspect press arm adjustment lever for proper function. Ensure that latch pin is
engaging each position fully. Replace improperly functioning parts with V
ectra
replacement parts only.
5.
Inspect press arm mounting screws for tightness. Tighten if necessary
.* Inspect all
springs, including press arm counter balance springs to make sure they are in good
condition and working properly. Replace any missing, damaged or worn springs with
Vectra replacement parts only
.
6.
Inspect bench bolts. Tighten if necessary
.* Inspect bench wheels, wheel suspension
pivots, retaining rings, spring, and braking features for proper function. Replace any
damaged or malfunctioning parts.
7.
Inspect leg developer mounting screws, pivots, bearings, and spring for tightness
and/or proper function. Replace any damaged or malfunctioning parts.
8.
Inspect cushion bolts for tightness. Tighten if necessary
.* Inspect cushion support
structure, squat attachments, pivots, guide wheels and associated latches. Remedy
any problems found using Vectra replacement parts only
.
9.
Inspect all molded parts such as pulleys, nylon bushings and cable stops. Make sure
all are intact, undamaged and secure. Replace any parts that are missing, worn or
damaged.
10. Inspect cable retaining plugs and spring plungers. Replace if needed using V
ectra
replacement parts only.
11. Inspect pulley pivots, retainers, axles, bushings, attachment points, and rotation
limiters. Inspect butterfly adjustment mechanism for proper function. Remedy any
problems found using Vectra replacement parts only
.
12. Inspect non-slip tread. Inspect rubber feet on frame and bench. Remedy any problems
found using Vectra replacement parts only
.
13. Adjust cable system tension if necessary (see assembly instructions for details).
W
e at Vectra Fitness appreciate your selection of our product for your fitness
program, and invite your questions and comments. We're sure that you’ll be pleased
with your new Vectra Fitness gym.
This owner’ s manual provides you with safety rules, assembly instructions and
routine inspection and maintenance information to enable you to get the most from
your gym.
Please read through this manual carefully before you assemble and use your
Vectra Fitness gym.
Warning:
Serious injury can occur if you are struck by falling weights or moving parts. The risk
that you assume by using this type of equipment can be reduced by obeying a
few simple rules:
1. IMPORT
ANT: Cables are a wear item. It is your responsibility to prevent
unexpected breakage. To do this, inspect every cable daily
. Pay particular attention
to areas near fittings at each end of each cable. Access panels are provided,
where necessary, for this purpose. Replace worn, frayed, or damaged cables
immediately. The actual wire strands, the fittings, and the nylon jacket itself
must all be scrutinized. Using or allowing a machine to be used with a suspect
cable can result in serious injury.
2. Inspect the nylon jacket of each cable carefully
, again paying particular attention
to the cable ends. This nylon jacket is essential for cable life and safety. Any
cable should be replaced if the nylon jacket is missing, is damaged in any way,
has pulled or shrunk away from the fittings at the end of the cable, or is discolored.
DISCOLORATION, DARKENING OR BULGING OF THE JACKET IS AN EARL
Y
INDICATION OF INTERNAL PROBLEMS SUCH AS WEAR OR FRA
YING.
3. Read and follow all instructions in your owner’
s manual, on your exercise chart,
and on product warning label. Additional copies are available from Vectra Fitness,
Inc. or your dealer. Do not use this machine until you have taken the time to
become completely familiar with its safe operation.
4. Consult your physician before beginning your exercise program.
5. Do not allow young children to use or play with or around this machine. Allow
older children to use the machine only with adult supervision.
6. Keep body
, hair, and clothing clear of weights and moving parts at all times.
Keep fingers clear of moving parts while making adjustments.
7. Inspect the gym for loose or worn parts, damaged, frayed, or worn cables, broken
weight plates, etc. Do not use or allow the machine to be used until any defective
parts are repaired or replaced. Refer to the “Routine Inspection and Maintenance”
section of your manual for specific inspection rules. Use only Vectra authorized
replacement parts.
8. Ensure that the weight selector pin is in good working condition and fully engaged
in the selector shaft prior to lifting. Use only the Vectra supplied pin or a V
ectra
authorized replacement.
9. Ensure that any locking mechanisms are properly engaged prior to lifting. Locking
mechanisms secure the following in position during use: seat pads, accessory
items such as squat attachments and lat hold downs, cable attachments, press
arms, leg developers, etc. An improperly engaged locking mechanism could
result in an injury.
10. Obtain assistance to free jammed weight plates, pulleys, etc. Do not attempt
to free jammed weight plates by yourself. Falling weight plates can cause serious
injury. Do not pin the weight stack or top plate in an elevated position and do
not use machine if found in this condition.
11. Do not drop the weight plates. Lift only as much as you can control safely
. Never
use dumbbells or other means to incrementally increase the weight resistance.
Use only those means provided by Vectra. Don’
t be careless, stay alert.
12. Serious injury could result if equipment moves while in use. T
o prevent this,
ensure that the floor is even, strong, and not too slippery. If equipment slides
too easily on floor, place equipment on rubber matting. Errors in lifting form
could also result in bench moving in use. To prevent this, lift weight vertically
only and do not push horizontally with your feet while lifting.
Replace any warning or caution labels on product if damaged, illegible, or removed.
Safety Rules
Introduction
Routine Inspection
& Maintenance
VX-38
VX-48 (combination of a VX-38 and a VX-11)
Note: The pulleys on this diagram are numbered to make the installation of new cables as easy as possible. Simply start threading
the cables through the pulleys beginning with the lowest number and working up. Since this machine comprises two separate cable
systems, both sets start at #1. If you are installing an entire set of cables start at either pulley #1, complete that system then start
at the other pulley #1. If you are installing only a new leg cable (PN 20920), you would begin at pulley #8. Note: where applicable,
text and other drawings in this manual that mention or show pulleys contain corresponding numbers.
Note: Leg/Calf Press option cable is PN 61000.
8
1
LEG
PN 20920
2
4
5
5
6
3
4
10
9
7
8
9
3
10
11
1
2
12
7
6
PN 22120
Cable Stop Ball
PN 22280
1/4-20 x .25 set screw
HIGH
PULLEY
PN 21930
ROW
PN 40980
BUTTERFL
Y
PN 28840
LOW PULLEY
PN 57810
AB
PN 20910
PN 47930
10”
EXTENSION
CABLE
Owner’s Manual
VX-38
PERFORM THE FOLLOWING CHECKS MONTHLY:
1.
Inspect all hand grips, pads, etc. Replace any damaged, worn, loose or missing parts.
2.
Inspect weight plates for cracks, damaged bushings, etc. Replace if necessary.
Check bolt, tighten if necessary.*
3.
Vectra’
s stainless steel guide rods DO NOT REQUIRE LUBRICATION or anti-rust
treatment. Simply keep them free of grit, sticky or gummy sprays, etc.
4.
Clean upholstery with mild soap and water as desired.
5.
If unit is in a humid area, such as near a pool, hot tub or sauna, or in certain
climates, use of an auto wax should delay rusting
* If any bolts seem to loosen periodically, use Loctile 242 for a long-term cure.