Vectron HW 90196 User Manual

Summary of HW 90196

  • Page 1

    User manual hw 90196 and components vectron systems ag version 1.0

  • Page 2

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 2/70 document informationen project: vectron type of document: user manual version: 1.0 date of issue: 02.02.2001 author: nicolett linke / lin höft & wessel ag, hannover changes: v...

  • Page 3

    User manual vectron © höft & wessel ag page 3/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted table of contents 1. General............................................................................................................................... 7 1.1 important co...

  • Page 4

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 4/70 6. Printer hw 90195 ............................................................................................................ 32 6.1 technical data............................

  • Page 5

    User manual vectron © höft & wessel ag page 5/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 9. Connection of the hw 90196 and hw 90195 via radio transmission........................... 54 9.1 general......................................................................

  • Page 6

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 6/70 10.8.5 15.209 radiated emission limits............................................................................ 66 10.8.6 15.247 operation within the bands ... 2400 – 2483....

  • Page 7

    User manual vectron © höft & wessel ag page 7/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 1. General introduction the mobile point-of-sale terminal hw 90196 is by its conception a non- intelligent terminal for input/output operations and radio connected with a bas...

  • Page 8

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 8/70 1.1 important comments for application! Initiation remove devices from packaging. Keep packaging material for future shipment purposes! Accu blocks are not inserted in hw 9019...

  • Page 9

    User manual vectron © höft & wessel ag page 9/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 1.2 bring-in service (repair of devices) in case of a necessary repair the device should always be send in with all equipment in original packag- ing to höft & wessels. The e...

  • Page 10

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 10/70 2. Graphik presentation and keyboard 2.1 hw 90196 frontal view fig. 1: hw 90196, frontal view smart card reader display keyboard with 16 keys mains supply/charging contact wi...

  • Page 11

    User manual vectron © höft & wessel ag page 11/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 2.2 keyboard functions key function switch on/off device corrections (delete of last character) numerical keys for numerical inputs. Decimal point inputs. Scroll key downwar...

  • Page 12

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 12/70 2.2.1 switch on/off hw 90196 switch on/off hw 90196 with this key c i . After approx. 30 seconds hw 90196 switches off automatically (to sleep mode), if processor is not run-...

  • Page 13

    User manual vectron © höft & wessel ag page 13/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 3. Technical data 3.1 hardware casing: robust casing made of 100% reusable abs-plastic, with integrated ring for shoulder strap. Dimensions: l 156 mm, w 83 mm, h 35,5 mm. We...

  • Page 14

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 14/70 read/write unit for smart cards: • plug-in reader in accordance with iso 7816, fci 7312 e 0225 s01, smd (at top of device). • 2 plug-in places for 2 dealer cards in id-000 fo...

  • Page 15

    User manual vectron © höft & wessel ag page 15/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 3.3 block diagram fig. 2: hw 90196, block diagram.

  • Page 16

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 16/70 3.4 power consumption following table shows an approximate overview of power consumption of mobile terminal hw 90196 at different operating states (bios terminal:‘09905, firm...

  • Page 17

    User manual vectron © höft & wessel ag page 17/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 4. Power supply of hw 90196 with accu block hw 19196 the power supply of hw 90196 is realised by an accu block which is inserted in the device. The accu block hw 19196 consi...

  • Page 18

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 18/70 4.2 charging condition of accu block the loading capacity of accu block should always be used to full extend. Keep hw 90196 in operation until the message „attention! Recharg...

  • Page 19

    User manual vectron © höft & wessel ag page 19/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 4.4 maintenance of accu block if accu blocks are stored, they should be re-charged on a regular basis. After a period of 6-8 weeks, even a new accu block is discharged to su...

  • Page 20

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 20/70 5. Operating system preface those functions which are explained in this chapter are installed as standard features in the operating system of the hw 90196 and are independent...

  • Page 21

    User manual vectron © höft & wessel ag page 21/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 5.1 operating system-basic menu 300 - hw 90196 - 8 320 (system-info) 9 326 (checking ram-/flash-disk) 327 (checking ram-/flash-disk) ↙↙↙↙ (entry) 305 (if no application prog...

  • Page 22

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 22/70 302 select language 1=d 2=gb ↙↙↙↙ (entry) or f2 (end) 300 1 300 (german language chosen) 2 300 (english language chosen) with language selected „2=gb“ system messages will be...

  • Page 23

    User manual vectron © höft & wessel ag page 23/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 5.1.1 system-info-display 320 ssssssss----nnnnnnnn eeee-xxxx-yyyy-vv.Vv flash:nn rrrr dddd bootldr: bbbbb tt.Mm.Jj hh:mm 8 300 (back to system menu) ssssssss = customer-spec...

  • Page 24

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 24/70 5.2 warm start a warm start is the complete initialization of hard- and software. After a warm start (message: ws ! -> c ) an application program will be started automaticall...

  • Page 25

    User manual vectron © höft & wessel ag page 25/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 5.4 format flash-disk note! The procedures described in this chapter will delete all data and programs on the hw 90196 and should thus be executed only in emergency cases! T...

  • Page 26

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 26/70 385 formatting completed -> c c 300 system menu after confirmation with the c-key in display 385 the flash-disk has been formatted succesfully. 5.5 radio module configuration...

  • Page 27

    User manual vectron © höft & wessel ag page 27/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted radion module serial number determination and indication of radio module no. Of pt-radio-modules. Sent commands display possible error message remarks gndnr n-number: radio ...

  • Page 28

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 28/70 standard settings resets radio module to standard settings. Sent commands display possible error messages remarks spbd115200 sptm pt sppr off spctr off spccn 1 spini 0 settin...

  • Page 29

    User manual vectron © höft & wessel ag page 29/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 5.6 connection to a pc the hw 90196 is able to communicate with a pc via the infrared-system interface or the integrated radio module. A communcation station hw 50196 is emp...

  • Page 30

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 30/70 the display 415 is only presented, if the hw 90196 has been inserted in the communication station. Else the communication program is aborted. 420 load program from pc via ird...

  • Page 31

    User manual vectron © höft & wessel ag page 31/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 5.7 error messages of the operating system major messages of the operating system, which are given out as a result of exceptional situations, may only be deleted by pressing...

  • Page 32

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 32/70 6. Printer hw 90195 the mobile printer hw 90195 has been specifically designed for use with pos terminal hw 90196. The connection to the terminal is established via radio tra...

  • Page 33

    User manual vectron © höft & wessel ag page 33/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.1 technical data 6.1.1 hardware casing: robust abs-plastic casing with fastening facilities for belt dimensions: l 133 mm, w 98 mm, h 64 mm. Weight: ca. 446 g incl. Rechar...

  • Page 34

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 34/70 6.1.2 software instruction set: epson escape-sequencies for pos-printer (subset). Character set: line print, any font type, special characters printable. Automatic line break...

  • Page 35

    User manual vectron © höft & wessel ag page 35/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.1.3 block diagram fig. 6: drucker hw 90196, block diagram.

  • Page 36

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 36/70 6.1.4 power consumption following table shows an approximate overview of power consumption of mobile printer hw 90195 at different operating states (bios printer #09906, firm...

  • Page 37

    User manual vectron © höft & wessel ag page 37/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.2.2 function indication leds a list of all led-combinations will be shown in the following. The green led usually indicates the accu charging condition: • on = „ok“, • fla...

  • Page 38

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 38/70 6.3 fonts 6.3.1 standard font 1 following table shows an overview of provided font 1 of mobile printer . Hex dez. Ascii hex dez. Ascii hex dez. Ascii hex dez. Ascii 00 0 20 3...

  • Page 39

    User manual vectron © höft & wessel ag page 39/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted hex dez. Ascii hex dez. Ascii hex dez. Ascii hex dez. Ascii 80 128 a0 160 c0 192 e0 224 81 129 a1 161 c1 193 ’ e1 225 82 130 a2 162 c2 194 ___ e2 226 83 131 a3 163 £ c3 195 ...

  • Page 40

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 40/70 6.3.2 standard font 2 following table shows an overview of font 2 of mobile printer. Hex dez. Ascii hex dez. Ascii hex dez. Ascii hex dez. Ascii 00 0 20 32 sp 40 64 @ 60 96 `...

  • Page 41

    User manual vectron © höft & wessel ag page 41/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted hex dez. Ascii hex dez. Ascii hex dez. Ascii hex dez. Ascii 80 128 a0 160 c0 192 À e0 224 à 81 129 a1 161 i c1 193 Á e1 225 á 82 130 a2 162 ¢ c2 194 e2 226 â 83 131 a3 163 £...

  • Page 42

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 42/70 6.4 test printout to process a test printout: 1. Switch on printer with on/off-key. 2. Open casing flap. 3. Press on/off-key and continue pressing it . 4. Close casing flap. ...

  • Page 43

    User manual vectron © höft & wessel ag page 43/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.6 special features of printer paper hold: after printing the last line the printer holds on tight of the printout for 15 seconds by motor power to facili- ate the tear off...

  • Page 44

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 44/70 6.7 changing paper reel of printer 1. Press green key to open casing of paper reel. 2. Open flap completely. 3. Insert paper reel in trough-shaped position. 4. Insert paper r...

  • Page 45

    User manual vectron © höft & wessel ag page 45/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.7.1 comments about the thermopaper recommended thermopaper: tf50ks-e2c 65 µ m (nippon paper industries) tp50kj-r 65 µ m ap50ks-e 65 µ m hp220-ab1 65 µ m (mitsubishi paper)...

  • Page 46

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 46/70 6.8 power supply with accu block hw 19195 the power supply for the mobile thermal printer hw 90195 is realised by the accu block hw 19195. Contacting is realised by two high-...

  • Page 47

    User manual vectron © höft & wessel ag page 47/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 6.8.2 replacing accu block of printer hw 90195 1. Open lid of accu casing by pressing both locking bottoms of accu casing lid. 2. Remove accu block. 3. Insert new accu block...

  • Page 48

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 48/70 7. Base station hw 8660 the hw 8660 is the base station for radio data transmission. It is suitable for communication with de- vices containing radiomodules of höft & wessel....

  • Page 49

    User manual vectron © höft & wessel ag page 49/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 7.1 technical data 7.1.1 hardware casing: plastic injection moulded casing, suitable for mounting on wall and ceiling; casing rear side: aluminium plate. Dimensions: l 157 m...

  • Page 50

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 50/70 7.1.3 block diagram fig. 12: hw 8660, block diagram.

  • Page 51

    User manual vectron © höft & wessel ag page 51/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 7.2 power supply unit the base station hw 8660 is connected to the mains by means of various power supply units. Fig. 13: hw 1204, frontal view 7.2.1 technical data type: po...

  • Page 52

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 52/70 8. Plug-in in id-000-format 8.1 description fig. 14: plug-in the plug-in in id-000-format (e.G. Dealer card) contains the key to withdraw money from customer smart cards of c...

  • Page 53

    User manual vectron © höft & wessel ag page 53/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 8.2 inserting the plug-in ℜ ℘ ⊗ ⊕ 1. Switch off the hw 90196. 2. Take out accu block. 3. Push lid of casing (see fig. 17) to the back. 4. Open lid topwise. 5. Insert plug-in...

  • Page 54

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 54/70 9. Connection of the hw 90196 and hw 90195 via radio transmission 9.1 general the digital radio data transmission allows the application of mobile devices as online-terminals...

  • Page 55

    User manual vectron © höft & wessel ag page 55/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 9.2 technical architecture following hardware is required for the data radio solution: • a mobile terminal hw 90196 with integrated radio module hw 86020; • a mobile printer...

  • Page 56

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 56/70 9.3 function diagram 9.3.1 initial logon of mde • the radio fixed part (in base station) sends program switcher signal information about established connection to mobile part...

  • Page 57

    User manual vectron © höft & wessel ag page 57/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 10. Radio frequency transmission system according to fcc part 15 10.1 purpose of the chapter this chapter describes the radio frequency transmission system hw 90196/us, hw 9...

  • Page 58

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 58/70 10.3.3 product hw 8660/us the product hw 8660/us is a radio base station operating in the 2400 – 2483.5 mhz band. It includes a general purpose microcomputer which serves ext...

  • Page 59

    User manual vectron © höft & wessel ag page 59/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted the frequency stability of the radio frequency carriers at the transceiver shall be better than +/- 50 khz under extreme temperature conditions. 10.4.2 carrier modulation fo...

  • Page 60

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 60/70 10.5.3 generic frequency hopping patterns i=46 generic hopping patterns are defined. Each generic hopping pattern uses all 48 frequency channels. Over a period of the hopping...

  • Page 61

    User manual vectron © höft & wessel ag page 61/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted n 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 i 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 23 40 17 41 18 42 19 43 20 44 21 45...

  • Page 62

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 62/70 each basestation has assigned a fixed generic hopping pattern. Co-located basestations may use the same generic hopping pattern or different generic hopping patterns without ...

  • Page 63

    User manual vectron © höft & wessel ag page 63/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 10.6.2 monitoring of the environment both sides, basestation and endpoint regularly and independently perform rssi scans of all accessible hopping channels and time slots. T...

  • Page 64

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 64/70 10.7 interference avoidance strategies 10.7.1 interference within the system the medium access procedures provide sufficient mechanisms so that there is no relevant interfere...

  • Page 65

    User manual vectron © höft & wessel ag page 65/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 10.7.3 interference from other sources other frequency hopping systems may cause occasional packet loss which is solved through packet re- transmission. The same applies to ...

  • Page 66

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 66/70 10.8 specific requirements from fcc chapter 15 10.8.1 15.203 antenna requirement an intentional radiator shall be designed to ensure that no antenna other than furnished by t...

  • Page 67

    User manual vectron © höft & wessel ag page 67/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 10.8.6 15.247 operation within the bands ... 2400 – 2483.5 mhz ... (a) operation under provisions of this section is limited to frequency hopping and direct sequence spread ...

  • Page 68

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 68/70 (h) the incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it i...

  • Page 69

    User manual vectron © höft & wessel ag page 69/70 lin 02.02.2001 1.00 hw90195userman.Doc subject to amendment, errors excepted 11. List of figures fig. 1: hw 90196, frontal view ..................................................................................................................... 10 f...

  • Page 70

    Vectron user manual © höft & wessel ag subject to amendment, errors excepted hw90195userman.Doc 1.0 02.02.2001 lin page 70/70 12. Index —b— base station see hw 8660 bring-in service 9 —c— connection to a pc 29 —d— dealer card 52 display 300 21, 25 302 22 305 22 310 22 315 22, 23 321 23 326 21 327 21...