Vectronics VEC-1290K Manual - page 11

VEC-1290K Instruction

Important Note: When installing the two-pin jumper headers, the shorter pins

are inserted into the pc board.,

10. Locate the two 100-pF ceramic trimmer capacitors. When inserting,

ensure that the three component leads are fully seated and that the

capacitor body is level. Install and solder at the following locations:

11. C11 100-pF trimmer

12. C12 100-pF trimmer

13. Locate the 510-pF polystyrene capacitor.

This part may be

marke 511, or with 510 using the old marking code system.

14. Install and solder the 510-pF (510 or 511) polystyrene capacitor al

C8.

10