Veet Infini'Silk Manual - page 12
12
English
Whenever Infini’Silk™ is turned on; its energy level will automatically be reset to the lowest energy level.
Only one Energy Level indicator Light will be on.
To set the energy level, press the central Button repeatedly to increase the energy level. After reaching level
5, an additional press will bring the level back down to Level 1, and so on, cyclically. The number of Energy
Level indicator Lights will coincide with the change in energy level.
4. Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly and smoothly and
the TREATMENT SURFACE is in full contact with the skin. Make sure the yellow Ready Indicator Light
starts blinking slowly.
5. Press the Pulse Trigger. The device will first determine the color of your skin.
If the color of the skin is light enough for safe application, the device will flash a pulse of light onto your
skin. You will see a bright flash of light and simultaneously hear a subtle pop sound, which is a normal
noise for the device. You may feel a mild sensation of warmth and tingling.
Infini’Silk™ will immediately recharge for the next pulse. After a few seconds (depending on the set
energy level) the yellow Ready Indicator Light will turn on again and start blinking.
If you see no light pulse, and the yellow Ready Indicator Light blinks rapidly, this is now the SKIN COLOR
WARNING INDICATOR LIGHT alerting that your skin tone is too dark for safe application. Try using
the device on a different body part or contact Veet® support.
6. Move the TREATMENT SURFACE to another area of skin.
Administer one pulse at a time at your chosen energy level. Use the pressure marks the device just made in
your skin to guide you for proper positioning of the next pulse, avoiding both gaps and overlaps between pulses.
Infini’Silk™ can be applied in two ways: “Pulsing” and “Gliding”.
7. Repeat the process starting again with Step 5.
PULSINg
When Pulsing, administer one pulse at a time at your chosen energy level.
Use the pressure marks on your skin to guide you for proper positioning of the
next pulse, avoiding both gaps and overlaps between pulses.
Covering skin areas
Infini’Silk™ treatment should be administered in rows, starting at one end of
each row and progressing sequentially towards the other end. This technique
allows better control of skin coverage, and helps you avoid treating the same
area more than once or overlapping skin areas. Ideal body areas for Infini’Silk™
use include the underarms, bikini line, arms and legs