1505 audio line driver service manual 098-0355 ch 1 ch 1 tx rx mic speaker ch 2 ch 2 ch 3 ch 3 ch 4 ch 4 level adjust ch 1 ch 1 ch 1 mute tx rx handset mic speaker ch 2 ch 2 ch 2 ch 3 ch 3 ch 3 ch 4 ch 4 ch 4 spkr ptt 1505 mixer/ line driver level adjust.
1. General the vega model 1505 audio line driver is a general purpose card that provides a reliable means of remotely controlling a variety of cus- tomer specified devices. The card is flexible. It can perform basic switching functions, custom- ized switching functions (via jumpers), or spe- cial us...
3.3 mounting this card is intended to be mounted in a tellabs type 10 or equivalent open frame rack. To avert erroneous operation, don’t install the card adjacent to equipment that generates high temperature or electromagnetic radiation. Al- ways provide an appropriate service loop on in- terconnect...
4. Connections 4.1 power connections connect positive 12 vdc to pins 55 and 56. Connect the 12 vdc return (normally ground) to pins 39 and 40. For best performance, use at least 20 awg or larger wire for power connec- tions. 4.2 signal connections and card edge con- nector pin assignment refer to th...
4.3.2 microphone jumpers depending on which microphone you are us- ing, the following jumpers must be installed: jp2 - carbon element; jp3 - electret element; jp4 - dynamic element with a low output. No jumpers are installed for a dynamic micro- phone with a high output. 4.3.3 receive line input imp...
4.4 securing the connections after all power and line connections are made, the wires should be neatly bundled and secured in place to prevent accidental breakage when in service. Use one or more of the cable guides supplied with the card rack, or tie in place with appropriate wire ties. 4.5 interfa...
Table 4. Card edge connector pin assignments (solder side) (component side) 6 card alt #1 alt #2 function user connection edge conn conn 1 a a ch #4 rx bal. Line in (-) 3 b b ch #4 rx mute 5 c c ch #4 rx bal. Line in (+) 7 d d ch #4 rx unbal line in 9 e e ch #3 rx unbal line in 11 f f ch #3 rx bal l...
6. Theory of operation 6.1 general the 1505 module uses a low loss, wide band transformer for each channel to interface to the phone line. Gain elements are low noise, low distortion, high gain operational amplifiers for quality performance. Each channel utilizes one half of dual compandor ic, confi...
8.
6.5 microphone input a microphone input is available through a jack on the front panel. It allows connection of a handset or palm type microphone through a standard modular phone connection. The jumper options allow the use of a carbon, electret, or dynamic element. The microphone amplifier is adjus...
10 1505 specifications operating temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 °c to 60°c power requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 to 16 v rms semi-regulated, 250 ma nominal 600 Ω/10k Ω balanced receive line input lev...
1505 parts list part no. Description ckt sym 012-0085 pcb sub assy 1505mix/line 031-0226 text spec 1505 aud mix/ld 065-0463 pcb 1505 aud mix/lin dr 071-0566 schematic 1505 mix/line d ref 102-0120 cap cer 20p 5% 50v s2l c2 c5 c19 c23 102-0290 cap cer100p s2l 5% 50v c8 c9 c22 c25 c76 102-0400 cap cer ...
Part no. Description ckt sym 134-2837 res rn55d 15.0k 1% 1/4w r100 r103 134-2967 res rn55d 12.1k 1% 1/4w r98 134-3032 res rn55d 15.8k 1% 1/4w r101 136-0001 res comp 2.7 5% 1/4w r107 136-0022 res comp 150 5% 1/4w r63 136-0040 res comp 4.7k 5% 1/4w r99 136-0044 res comp 10k 5% 1/4w r13 r16 r24 r26 r27...
Part no. Description ckt sym 286-1766 conn jumper plug jp1 jp2 jp3 jp4 jp5 jp6 jp7 jp8 jp9 jp10 jp11 jp12 jp13 286-1772 connector 36pin strip tin jp1 jp2 jp3 jp4 jp5 jp6 jp7 jp8 jp9 jp10 jp11 jp12 jp13 286-1964 test point yellow .055 mnt tp1 tp2 tp3 tp4 tp5 tp6 tp7 tp8 tp9 tp10 tp11 tp12 tp13 tp14 t...
Nov. 2000 printed in u.S.A. 8601 east cornhusker highway, lincoln, nebraska, 68507 phone: (402) 467-5321 / (800) 752-7560 fax: (402) 467-3279 e-mail: vega @telex.Com, web: www.Vega-signaling.Com.
