Summary of U2020
Page 1
U2020 application guide.
Page 2: Important Notes
Vega u2020 application guide 2 this guide provides information for configuring u2020 systems with various numbers of channels. Block diagrams and basic equipment lists are provided for systems with from four to sixteen channels. Other useful application and configuration information is also included...
Page 3
Vega u2020 application guide 3 application tips the mc-2020 and mc-2020a are supplied with eight 24" (60 cm) bnc rf cables for connecting the multicoupler output to four r-2020 receivers. Unless remote antennas will be used, no additional rf cables will be required. The mc-2020 and mc-2020a are not ...
Page 4
Vega u2020 application guide 4 to move antennas to the front of the receiver 1. Using a phillips-head screwdriver, remove the two bottom screws (bottom panel closest to the front of the receiver) and the two screws on the rear panel as shown below. 2. Using a 5/8” (16 mm) socket wrench, unscrew the ...
Page 5: Rack Mounting Kit
Vega u2020 application guide 5 rack mounting kit a dual rack mounting kit for the r-2020, mc-2020 and mc-2020a, model rk-2020, is available. Complete instructions for mounting receivers and multicouplers are included with the rk-2020. Note that there will be an unfilled hole remaining when a odd num...
Page 6: Using Remote Antennas
Vega u2020 application guide 6 in most cases, remote antennas are preferable when u2020 systems are rack mounted. Vega offers several appropriate uhf antennas, including the an-722, an-723 and an-725. The whip antennas supplied with the receivers can also be used remotely, provided that an appropria...
Page 7
Vega u2020 application guide 7 u2020 system block diagrams and equipment lists this information may be helpful to you when planning various size systems. Call vega for larger system diagrams. Please feel free to duplicate as required. Four-up systems consist of: 4 u2020 systems of choice 1 mc-2020 m...
Page 8
Vega u2020 application guide 8 four-up systems consist of: mc-2020 or mc-2020a supplied 24” (60 cm) bnc cables r-2020 receivers six-up systems consist of:.
Page 9
Vega u2020 application guide 9 eight-up systems consist of: ten-up systems consist of:.
Page 10
Vega u2020 application guide 10 twelve-up systems consist of:.
Page 11
Vega u2020 application guide 11 sixteen-up systems consist of:.
Page 12: Rear View
Vega u2020 application guide 12 bt-2020 lavalier microphone connections many different manufacturer’s microphones may be connected to bt-2020s. Use the following information as a guide only. Ceramic chip capacitors 100 - 270 pfd positive (+) bias shield (ground) audio with positive bias through10 k-...
Page 13
Vega microphone connection data: miniature xlr (tini "q-g") (for vega models: t-16, t-17, t-25, t-37, ranger transmitters, and bt-2020) manufacturer model vega model # pin #1 pin #2 pin #3 pin #4 notes akg c67, c567 — shield — white — 2 audio technica at803, 831 — red/wh — yel/bk shield 1, 2 audio t...