- DL manuals
- Vega
- Switch
- VEGAVIB 62
- Operating Instructions Manual
Vega VEGAVIB 62 Operating Instructions Manual
Summary of VEGAVIB 62
Page 1
Operating instructions vibrating level switch with tube extension for granuled bulk solids vegavib 63 - contactless electronic switch document id: 29278.
Page 2: Contents
2 contents vegavib 63 • - contactless electronic switch 29278-en-160122 contents 1 about this document 1.1 function ........................................................................................................................... 4 1.2 target group ............................................
Page 3
3 contents vegavib 63 • - contactless electronic switch 29278-en-160122 safety instructions for ex areas take note of the ex specific safety instructions for ex applications. These instructions are attached as documents to each instrument with ex approval and are part of the operating instructions m...
Page 4: 1 About This Document
4 1 about this document vegavib 63 • - contactless electronic switch 29278-en-160122 1 about this document 1.1 function this operating instructions manual provides all the information you need for mounting, connection and setup as well as important instruc- tions for maintenance and fault rectificat...
Page 5: 2 For Your Safety
5 2 for your safety vegavib 63 • - contactless electronic switch 29278-en-160122 2 for your safety 2.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and wit...
Page 6
6 2 for your safety vegavib 63 • - contactless electronic switch 29278-en-160122 2.5 safety label on the instrument the safety approval markings and safety tips on the device must be observed. 2.6 ce conformity the device fulfills the legal requirements of the applicable ec guide - lines. By affixin...
Page 7: 3 Product Description
7 3 product description vegavib 63 • - contactless electronic switch 29278-en-160122 3 product description 3.1 configuration the scope of delivery encompasses: • vegavib 63 point level switch • documentation – this operating instructions manual – safety manual " functional safety (sil) " (optional) ...
Page 8
8 3 product description vegavib 63 • - contactless electronic switch 29278-en-160122 can find the serial number on the inside of the instrument as well as on the type label on the outside. 3.2 principle of operation vegavib 63 is a point level sensor with vibrating rod for level detec- tion. It is d...
Page 9
9 3 product description vegavib 63 • - contactless electronic switch 29278-en-160122 • signal lamp for indication of the switching condition (green/red) • potentiometer for adaptation to the product density • mode switch for selecting the switching condition (min./max.) 3.4 storage and transport you...
Page 10: 4 Mounting
10 4 mounting vegavib 63 • - contactless electronic switch 29278-en-160122 4 mounting 4.1 general instructions make sure that all parts of the instrument coming in direct contact with the process, especially the sensor element, process seal and process fitting, are suitable for the existing process ...
Page 11
11 4 mounting vegavib 63 • - contactless electronic switch 29278-en-160122 warning: the housing must not be used to screw the instrument in! Applying tightening force can damage internal parts of the housing. Use the hexagon above the thread for screwing in. Metric threads in the case of instrument ...
Page 12
12 4 mounting vegavib 63 • - contactless electronic switch 29278-en-160122 fig. 3: inflowing medium vegavib 63 can be mounted with a lock fitting for height adjustment. Take note of the pressure information of the lock fitting. The vibrating element should protrude into the vessel to avoid buildup. ...
Page 13
13 4 mounting vegavib 63 • - contactless electronic switch 29278-en-160122 d d d 6 d 6 fig. 4: filling and emptying centred d d 6 1 2 3 fig. 5: filling in the centre, emptying laterally 1 vegavib 63 2 discharge opening 3 filling opening.
Page 14
14 4 mounting vegavib 63 • - contactless electronic switch 29278-en-160122 in applications such as grit chambers or settling basins for coarse sediments, the vibrating element must be protected against damage with a suitable baffle. This baffle must be manufactured by you. > 125 mm (> 5") > 120 mm (...
Page 15
15 5 connecting to power supply vegavib 63 • - contactless electronic switch 29278-en-160122 5 connecting to power supply 5.1 preparing the connection always keep in mind the following safety instructions: warning: connect only in the complete absence of line voltage. • the electrical connection mus...
Page 16
16 5 connecting to power supply vegavib 63 • - contactless electronic switch 29278-en-160122 1. Unscrew the housing lid 2. Loosen compression nut of the cable gland and remove blind plug 3. Remove approx. 10 cm (4 in) of the cable mantle, strip approx. 1 cm (0.4 in) of insulation from the ends of th...
Page 17
17 5 connecting to power supply vegavib 63 • - contactless electronic switch 29278-en-160122 5 5 5 5 1 2 4 3 fig. 8: material versions, single chamber housing 1 plastic (not with eex d) 2 aluminium 3 stainless steel (not with eex d) 4 stainless steel, electropolished (not with eex d) 5 filter elemen...
Page 18
18 5 connecting to power supply vegavib 63 • - contactless electronic switch 29278-en-160122 1 fig. 9: wiring plan 1 shielding.
Page 19: 6 Setup
19 6 setup vegavib 63 • - contactless electronic switch 29278-en-160122 6 setup 6.1 general information the figures in brackets refer to the following illustrations. On the electronics module you will find the following display and adjustment elements: • potentiometer for adaptation to the product d...
Page 20
20 6 setup vegavib 63 • - contactless electronic switch 29278-en-160122 vegavib 63 will be more sensitive and light solids can be detected more reliably. For instruments detecting solids in water, these settings are not applicable. The switching point adaptation is preset and must not be changed. Wi...
Page 21
21 6 setup vegavib 63 • - contactless electronic switch 29278-en-160122 level switching status control lamp failure of the sup- ply voltage (min./max. Mode) any 2 1 switch open fault any 2 1 switch open flashes red.
Page 22
22 7 maintenance and fault rectification vegavib 63 • - contactless electronic switch 29278-en-160122 7 maintenance and fault rectification 7.1 maintenance if the instrument is used properly, no special maintenance is required in normal operation. 7.2 rectify faults the operator of the system is res...
Page 23
23 7 maintenance and fault rectification vegavib 63 • - contactless electronic switch 29278-en-160122 error cause rectification signal lamp flashes red error on the vibrating el- ement check if the vibrating element is damaged or extreme- ly corroded. Interference on the elec- tronics module exchang...
Page 24
24 7 maintenance and fault rectification vegavib 63 • - contactless electronic switch 29278-en-160122 8. Compare the settings of the two electronics modules. Set the adjustment elements of the new electronics module to the same setting of the old one. Information: make sure that the housing is not r...
Page 25: 8 Dismount
25 8 dismount vegavib 63 • - contactless electronic switch 29278-en-160122 8 dismount 8.1 dismounting steps warning: before dismounting, be aware of dangerous process conditions such as e.G. Pressure in the vessel, high temperatures, corrosive or toxic products etc. Take note of chapters " mounting ...
Page 26: 9 Supplement
26 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 9 supplement 9.1 technical data general data material 316l corresponds to 1.4404 or 1.4435 materials, wetted parts Ʋ process fitting - thread 316l Ʋ process fitting - flange 316l Ʋ process seal klingersil c-4400 Ʋ vibrating...
Page 27
27 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 modes (switchable) min./max. Switching delay Ʋ when immersed 0.5 s Ʋ when laid bare 1 s ambient conditions ambient temperature on the housing -40 … +80 °c (-40 … +176 °f) storage and transport temperature -40 … +80 °c (-40 ...
Page 28
28 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 density Ʋ standard > 0.05 g/cm³ (0.002 lbs/in³) Ʋ adjustable > 0.02 g/cm³ (0.0007 lbs/in³) granular size no limitation 1) electromechanical data cable entry/plug (dependent on the version) Ʋ single chamber housing – 1 x cab...
Page 29
29 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 9.2 dimensions vegavib 63, housing 3 2 1 4 ~ 69 mm (2.72") ø 79 mm (3.11") 117 mm (4.61") m20x1,5/ ½ npt ~ 59 mm (2.32") ø 80 mm (3.15") 112 mm (4.41") m20x1,5/ ½ npt ~ 69 mm (2.72") ø 79 mm (3.03") 112 mm (4.41") m20x1,5/ ...
Page 30
30 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 l 25 mm (0.98") g1 ø 16 mm (0.63") 20 mm (0.79") 125 mm (4.92") ø 29 mm (1.14") fig. 31: vegavib 63, threaded version g1 a (din iso 228/1) l sensor length, see chapter "technical data".
Page 31
31 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 g1½ 33 mm (1.30") ø 16 mm (0.63") 22 mm (0.87") 125 mm (4.92") ø 29 mm (1.14") l fig. 32: vegavib 63, threaded version g1½ a (din iso 228/1) l sensor length, see chapter "technical data".
Page 32
32 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 ø 34 mm (1.34") 178 mm (7.01") fig. 33: temperature adapter.
Page 33
33 9 supplement vegavib 63 • - contactless electronic switch 29278-en-160122 9.3 industrial property rights vega product lines are global protected by industrial property rights. Further information see www.Vega.Com. Vega produktfamilien sind weltweit geschützt durch gewerbliche schutzrechte. Nähere...
Page 34
34 notes vegavib 63 • - contactless electronic switch 29278-en-160122.
Page 35
35 notes vegavib 63 • - contactless electronic switch 29278-en-160122.
Page 36
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 29278-en-160122 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...