Veho VMP-009 4GB User Manual - page 7
24
Upgrade Player Driver 20
The player can upgrade or resume the damaged player driver via the tool software in the attached disk.
1. For the first upgrading of computer, insert the drive disk into the CD-ROM of computer, then connect the
MP4 player with computer (it requires you to press and hold the MENU key), till it appears the program
Installation Interface.
2. Implement the next step according to the Dialog box prompt, and select the “Upgrading Tool” folder in the
attached disk in the “Browse” option of the fourth Dialog box, then click Confirm.
3. Operate as per the prompt in dialog box till the accomplishment
4.When the installation of programs required by computer is OK, you can begin the upgrading; select and run
the firmware upgrading tool Consumer.exe (can be found in attached disk), then open the option and select
Rock2*.rfw file (the Interface is as follows).
25
5.Connect the player to PC via USB cable (press and hold the MENU key before the On-line operation), then
click [Burnt Firmware] till the Auto Upgrading is achieved.
Note: Firmware upgrade is to improve and optimize the performance of the player. The normal work of the
player would not be affected even if the firmware isn’t upgraded. The wrong operation of upgrading firmware
would cause the device not to work normally! The firmware upgrade software of this player is not applied to
other series of players.
26
Troubleshooting 21
If the player can not be played normally, please check as follows:
Troubles
Causes
It cannot be turned on
Check whether the player is powered on or not and whether the
machine program is damaged or not
The player is blocked
Push the power switch to restart the player
It can not be played
Check whether the machine is powered on or not
Confirm the volume is not in “0” level, check the earphone is
connected well and keep the earphone clean
Format the disk again
It can not upload/download the
file or the disk can not be found
in computer
Insert USB cable totally well after the Power on. Correctly install
the driver again.
It can not be recorded
Check the enough memory and the electricity
Words on display are deformed
Make sure that you have selected the correct language
It can not be used normally after
upgrading
Upgrade again in Windows 2000
27
Items
Specifications
Dimensions
80×47×12mm (W*H*D)
Weight
About 46g
TFT colored display
260K real colored display, Diagram (320*240)
Language support
Multiple languages
Data transmission speed
High speed USB2.0 (5M Byte/s)
Supportable file format
Music: MP3, WMA, WMV, ASF, WAV
REC: WAV Picture: JPEG
Supportable video format
AVI, RM, VOB, DAT, RMVB etc. (should be converted)
SNR
85dB
Max. output power
10mW in left and right
Storage media
Embedded Flash, memory 128MB/256MB/512MB/1GB/2GB,
Power supply
3.7V li-ion battery
Usable time of battery
Video play: 6 hours
MP3 play: 8 hours (power save mode)
Working temperature
5
℃ to 40℃
Supporting operating system
WINSE/ME/2K/XP/Vsita, Mac OS 10, Linux 2.4.2 and WIN98 (require to
install the program)
Accessories
User’s Manual, earphone, USB cable, installation CD disk