Veito CH1800 RE User Manual - page 8
•Use the unit in places with easy eccess
to power sockets and that are well
ventilated.
•Never use connecting terminals in the
power lead. Always directly connect the
unit to the power.
PRECAUTIONS
7
Precautions for installation and before use
PRECAUTIONS FOR INSTALL
!
!
!
Install the product at places
where bottom is solid and even.
(the product cannot be working
at tilted places)
Install the product at places
that are visible to people.
(frequently observe the
product for safety)
Install the product at places where users
always reside and be sure to equip fire
extinguisher.
Do not install at places with high
temperature.
HOW TO INSTALL
*Keep packaking parts because they are necessary in
maintaining the heater for a long time.
•Assemble the two parts of
the base.
•Place the aluminium profile into
the place on the base and push it
on a level until it sounds 'click'.
*After reading this, be sure to keep it at a place where
other users can refer to it at any time.
Insert the plastic connection part
onto the aluminium profile.
Assemble the product
stand with the product. Tighten the
connection nut adequately
as to secure the heater in position.
You will re-adjust
this height later.
50 cm
50 cm
1.8 m
•Always leave a clear space of at
least 0.5m from the left and right
of the unit. The unit must also have
at least 1.8m clear space above it.
Never put any obstacles nearer than
1.8m to the front of the heater.
The unit must be installed at least
1.8m height from the floor.