Vektra Vacuum Electric Kettle Instruction Manual - Before First Use
of
6
Before First Use
Fill the kettle up to the Max Water Mark and bring to the boil.
It is recommended that you fill, boil and empty the water at
least 3 times to clear the kettle of any tiny particles or metal/
plastic taste.
Using The Kettle
Filling: Remove the kettle from the power base before filling.
Remove the lid (as shown in the diagram above) and fill with
water as required. DO NOT fill past the Max Water Mark.
Switching On: Check that the lid is closed. Plug the power cord
into the mains and press the On/Off switch.
Switching Off: When the water has boiled, the kettle will
automatically switch off. You can stop the boiling process
manually at any time, simply by pressing the On/Off switch.
Handle
On/Off switch
Spout
Lid
Twist lid anti-clockwise
to open and clockwise
to lock.