Vela Blues 100 User Manual - page 10
10
footrests
eleCtriC sWiVel footrests, standard
The VELA Blues 100 has, as standard equipment, electric swivel
footrests.
The VELA Blues 100 can also be equipped with a set of adjustable
footrests attached to the seat frame.
The footrest can be moved out of the way when entering and exit-
ing the chair by lifting the bar approx. 3 cm up and swinging the
footrest around the side at the same time.
The depth of the footrest can be adjusted using the tool for adjust-
ing the sliding bar in the seat frame either forwards or backwards.
The footrest can be adjusted to suit leg length by regulating the
length bar in its hollow tube. The foot angle can be adjusted using
the tool in the swivel part of the footplate.
folding s-footrest With plate (optional)
The footplate saves space and follows the height of the seat when
the electric seat lift function is used. The length of the footrest is
regulated by loosening the six-sided bolt on the bar down by the
footplate. The desired position for the footplate is selected and the
six-sided bolt is tightened again. The s-footplate can be folded up
when entering and exiting the chair.
adJustMent of Chair BaCK/seat depth
The chair back is released by loosening the fastener on the chair
back bar located in the back under the seat. The chair back is
placed in the desired position and then tightened again.
The chair back bar is equipped with a pull stop to ensure that the
chair back bar is correctly anchored in the chair back holder.
Destruction of the pull stop and extreme pressure on the chair
back bar can cause damage to the chair back holder.
plaCeMent of Control Box
parallel fittings
The control box is mounted on either the right or the left side
according to customer specifications.
The VELA Blues 100 is delivered with parallel fittings as standard,
making it possible to slide the control box along the armrest so
that the chair can e.g. come all the way up to a table.