Vela Tango 500 User Manual - page 10
1 0
1.6.16. FOOTREST (OPTIONAL)
The footrest can be adjusted in length by loosening the hand
screw on the back of the footrest lever. Remember to tighten
the screw when done. The footrest can be folded up so that it
is not in the way when getting in and out of the chair.
1.6.17. STROLLING BRACKET (OPTIONAL)
Strolling bracket for transporting a person in the chair. The
strolling bracket is mounted to fi ttings under the seat using
two fi nger screws. This is also where the depth is adjusted. The
height is adjusted by pressing the two buttons on the side of
the bracket while the handle is positioned at the desired height.
1.6.19. ANGLE SWITCH (OPTIONAL)
Placed on the underside of the left or right-hand armrest as
required. Remember, position the switch correctly (see section
1.6.2.).
1.6.18. FOOT PEDAL FOR BRAKING (OPTIONAL)
On a VELA Tango with foot pedal the brake is activated by
pressing the upper part of the pedal forward. Unlock the chair
by moving the foot brake back into the upright position.
Note: The foot pedal can be mounted on the left or right-hand
side, on the rear of the chair.