Camset5a --- version ii owner's manual car rear view system.
Velleman camset5a -- version ii 1 car rear view system the camera included is designed for use with the monitor supplied and is not suitable for connection to any other monitor. The monitor can be hooked up to two cameras. For optional camera, contact your local dealer. Please read before installing...
Velleman camset5a -- version ii 2 caution risk of electric shock do not open caution to reduce the risk of electric shock, do not remove cover (or back) no user-serviceable parts inside. Refer servicing to qualified service personnel the lighting flash with arrowhead symbol, within and equilateral t...
Velleman camset5a -- version ii 3 7. Damage requiring service - the unit should be serviced by qualified service personnel when : - the power cord or the plug has been damaged. - objects have fallen or liquid has been spilled into the unit. - the unit has been exposed to rain. - the unit does not ap...
Velleman camset5a -- version ii 4 camera installation 1. At camera mounting position, fit the camera mounting bracket ! To this position using the screws to the centre hole and slide hole. 2. Turn the bracket left and right to a correct direction and then tighten the screws. 3. Fit the camera to the...
Velleman camset5a -- version ii 5 monitor installation 1. At the monitor mounting position, placing the monitor mounting bracket # and screw into the centre hole and slid holes. Adjusting the bracket by turning it left and right to let the monitor face to you directly. Then tightening the bracket. 2...
Velleman camset5a -- version ii 6 connection to monitor important : do not connect any camera to the monitor while monitor is switched on. 1. Plug the camera into the camera input din sockets marked a and b at the back of the monitor. Ensure that the arrow on the camera plug is at the top before ins...
Velleman camset5a -- version ii 7 function description % power-on switch push this button you can view the picture. Normally leave it unpushed when the monitor is used in backing a truck or a car. When you shift the gear in reverse, the unit will automatically display the picture of camera a no matt...
Velleman camset5a -- version ii 8 ( normal image / mirror image select switch please note that this switch has been set to mirror (rev. Image) position by manufacturer. When you want to view from behind while you are backing a truck car, be sure to set this select switch to the (rev. Image) position...
Velleman camset5a -- version ii 9 specifications monitor camset5a scanning frequency horizontal vertical 15625hz -ccir- 50hz -ccir- video input 1vpp / 75 Ω size of display 5" crt scanning size 86% min. (horizontal) resolution at centre 500 lines shock 6.8g vibration 0 to 2000hz input voltage dc 12-2...
