Summary of CS-5MX
Page 1
Cs-5mxp professional metal detector operating manual gebruikers handleiding manuel de l'utilisation.
Page 2
Cs-5mxp gb 1 cs-5mxp - rapid get you going instructions 1. Assemble and adjust for length (twist surplus lead around stem) 2. Insert batteries 3. Set disc 1 (top right) to all metal (fully anticlockwise). 4. Set disc 2 (bottom far right) to 5. 5. Set sensitivity (top left) to 3 o'clock position. 6. ...
Page 3: Controls
Cs-5mxp gb 2 controls c-scope cs-5mxp a battery compartment b upper stem & handle grips c din plug & socket d stem connecting nut e cable f lower stem g search head fastner h power on / off & sensitivity i signalmeter j all metal mode / discrimination 1 k boost hi / normal l pinpoint m battery check...
Page 4: Introduction
Cs-5mxp gb 3 introduction the cs-5mxp combines 'turn on and go' technology with real depth to provide you with both simplicity in use yet sophistication in performance. Important these family of detectors are recognised as the finest detectors available. They are designed with lasting quality in min...
Page 5
Cs-5mxp gb 4 the batteries should be fitted in the holder which is located in the battery compartment. To fit new batteries first check the power switch on the unit is switched to off. Then loosen the two captive screws located in the battery cover (do not fully remove these from the cover) and remo...
Page 6
Cs-5mxp gb 5 controls and what they do the cs-5mxp has been designed to offer simplicity of use with high, reliable performance. The control panel comprises three rotary controls, three push buttons, one toggle switch and a meter. I. On/off sensitivity switches detector on by rotating clockwise and ...
Page 7
Cs-5mxp gb 6 iii. Disc 2 this control is identical to disc 1 and allows you to further identify the target signal being received. With disc 1 set at 5 to reject small iron and silver foil, commence searching. Remember the cs-5mxp is a motion machine which means that the search head needs to be const...
Page 8
Cs-5mxp gb 7 three points to remember : 1. Large iron objects, particularly if near the surface, can produce a signal regardless of discrimination settings. 2. Although disc 1 and 2 are set to ignore metals at the same position there may be slight variations in your machine and between different mac...
Page 9: Operating Your Cs-5Mxp
Cs-5mxp gb 8 vi. Signal meter/battery check this is a visual indication of the signal strength giving the experienced user more information about the target. This is particularly useful for pinpointing. When the batt check is pressed, the meter will indicate condition of the batteries. If the meter ...
Page 10: Detection Range
Cs-5mxp gb 9 detection range detection ranges will vary depending on the size of the object, the length of time an object has been buried, and the type of ground the object is buried in. The best ground conditions are well compacted soils and coins can be found at the greatest depths if the object h...
Page 11
Cs-5mxp gb 10 the importance of the right approach treasure hunting can be a profitable and rewarding hobby, if approached in a patient and diligent manner. Time spent researching to locate a worthwhile site for a search can be time wasted if your search is hasty and erratic. To achieve maximum resu...
Page 12: Sweeping Technique
Cs-5mxp gb 11 the technique of getting the best out of your detector is not learnt overnight. You need to get as much experience as possible so that you can recognise every kind of signal. Indeed, a good detector operator can often tell you what is being detected before it is unearthed. It is essent...
Page 13: Detector Not Operating ?
Cs-5mxp gb 12 detector not operating ? (a) check the condition of batteries under load using the meter. (see battery check procedure) (b) check that the search head is properly attached to the control box via the search head cable connector. (c) interchange batteries and ensures connections are corr...