Summary of CS4MX
Page 1
Cs 4mx operating instructions.
Page 2: Identifying The Parts
2 1) on off/ sensitivity control 2) ground level control 3) pinpoint/ discrimination 1/ discrimination 2 switch 4) all-metal/ discrimination level control 1 5) discrimination level control 2 6) control box mounting clip 7) loudspeaker 8) battery compartment 9) 8 x aa battery holder 10) battery conta...
Page 3: 4Mx
3 cs 4mx the cs4mx is a high performance metal detector operating on the ‘motion’ principle. This means that the search-head must be kept moving at a steady sweep speed to achieve optimum performance. The cs4mx provides the option of interchangeable search-heads to optimise performance on a variety ...
Page 4: Rapid Start
4 follow these simple steps to start using the cs4mx within minutes: 1) insert the lower stem into the upper stem (first press in the spring clip). 2) twist the locking device so that the stem is locked at the required length. 3) coil the search-head lead around the stem. 4) plug the search-head lea...
Page 5: 4Mx
1) on off/sensitivity control. Rotary control switches the detector on/off and adjusts the sensitivity. Ground containing mineralisation and some beach situations may cause instability or false signals requiring a reduction of the sensitivity level. 2) ground level control. Start off with this set t...
Page 6: Assembling The Cs4Mx
6 assembling the cs4mx the stem lock should be slackened to allow the lower stem to enter the upper stem section. The spring clip should be pressed in to allow the lower stem to slide into the upper stem. This spring clip will pop into any of the holes in the upper stem and firmly fix the two stems ...
Page 7: Belt Mounting
Belt mounting squeeze the control box retaining clips together using your thumbs as shown in the photograph. The control box will now slide towards you free of the control box mounting clip. The control box can be fitted to your belt using the clip provided. In belt mounted use, be sure to wind the ...
Page 8: Detecting With The Cs4Mx
8 on the majority of inland sites the ground control should be set to auto and the recommended sensitivity setting between 7-9 on the scale will give the best results. Some types of ground may give rise to false signals and the sensitivity level should be reduced to a point where operation of the de...
Page 9: Detecting With The Cs4Mx
Searching. We recommend searching with a low level of discrimination (1-4 on disc 1). At this setting the cs4mx will not react to small pieces of iron but will give a positive audio tone on other metal targets. Increasing the discrimination level will eliminate signals from a wider range of metal ob...
Page 10
Sensitivity, ground effect & discrimination cigarette packet 5p coin ring pull screw cap nail horseshoe milk bottle top ignore (no sound) positive signal (sound) 1 10 effect of discriminate control position you will be able to get more performance out of your detector if you understand the relations...
Page 11: Warranty & Service
Warranty & service your cs4mx is guaranteed free of manufacturing defects as confirmed in our written warranty. Contact us if you have any concerns about the operation of your detector. The c.Scope customer service team really know about metal detectors and are always ready with good advice and rapi...
Page 12
C.Scope international ltd kingsnorth technology park wotton road ashford kent tn23 6ln uk telephone: +44 (0)1233 629181 fax: +44 (0)1233 645897 email: info@cscope.Co.Uk web: www.Csmetaldetectors.Com c.Scope is an iso 9001 accredited quality manufacturer. This equipment conforms to the emc directive ...