Velleman CS990XD User Manual - page 3
CS990XD
VELLEMAN
3
CS990XD – PROFESSIONAL METAL DETECTOR
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, do not install or use it and contact your dealer.
C.SCOPE
®
detectors are recognised as the finest detectors available. They are designed with lasting quality, high
technology, and above all, value for money. The only way to realise this value is to carefully study and understand the
instruction manual. You will then be able to obtain all the advantages designed into your detector. It is also strongly
recommended that you experiment with the detector’s operation in air using various test samples, in order to learn to identify
and understand the detector’s capabilities and responses. Always remember that becoming a good metal detectorist is like
becoming a good photographer of fisherman, that is, although it is an advantage to buy the best equipment, having bought it,
patience and hours of practice are needed to become proficient.
2. Description
A.
battery compartment
B.
upper stem and handle grips
C.
control box
D.
stem connecting nut
E.
cable
F.
lower stem
G.
search head and fastener
3. Assembly
Insert the lower stem into the upper stem. Tuck the cable into the cable slots in the lower stem to prevent it trailing over the
search head. Rotate the lower stem to wrap the cable around the stems and take up any slack and twist the stem lock to hold
the lower stem in position.