Velleman K8074 Getting Started Manual

Page of 4

Download

Bookmark us

This unit will turn your computer into a powerful remote control.

Simply connect to the USB port, install the driver and you are set.

The transmitter works together with our K8056 card, equipped with

an RX433 receiver module. Also our K8070 / VM119 one channel

receiver can be used. In total a combination of 255 cards can be

addressed, resulting in a maximum of 2040 channels !!

Our wireless RGB controller, VM151 can also be used.

Drivers and example software can be downloaded from our

web site.

GETTING STARTED GUIDE

K8074

USB to RF remote control transmitter

Technical :

• USB1.1 or 2.0 port compliant

• Range : up to 30m (depends on environment)

• Works with K8056(+RX433) and K8070 / VM119

VM151..

• RF transmit indicator LED

• Power LED

• USB port function LED’s

• 255 selectable addresses

• Transmit—test button

K8056 8 channel relay cards

K8070 / VM119 one channel dual output receivers

• 433MHz transmitter

• R&TTE compliant design

• Power supply : USB

• Includes enclosure

• Dimensions : 80x55x35mm

Screenshot of the demo and test software

Page 1
This unit will turn your computer into a powerful remote control. Simply connect to the usb port, install the driver and you are set. The transmitter works together with our k8056 card, equipped with an rx433 receiver module. Also our k8070 / vm119 one channel receiver can be used. In total a combin...
Page 2: Getting Started Guide
Getting started guide k8074 test button function when the test-button is pressed, the unit will transmit an ‘all clear’-command. All outputs on the k8056/ vm118/k8070/vm119 will turn off. Careful: the test-button will only work when the unit is connected to the pc via a usb cable. Installation of th...
Page 3: Getting Started Guide
An extra ‘com’-port will appear in the device manager. Right click and select ‘properties’. Make sure it is the com-port that connects to the k8074. Remember the port number. Getting started guide k8074 using the test software with k8056/vm118 relay card (k8056 must be equipped with optional rf rece...
Page 4: Getting Started Guide
Getting started guide k8074 using the test software with k8070/vm119 one channel dual output receiver locate and launch k8074proj.Exe. Make sure that the file ‘k8074.Dll’ is located in the same directory. Select correct com-port number and click ‘connect’ select k8070/vm119 address (default setting:...