1. DL manuals
  2. Velleman
  3. Toy
  4. KSR13
  5. Assembly & Instruction Manual

Velleman KSR13 Assembly & Instruction Manual

Manual is about: KIT ROBOT SOLAR EDUCATIVO 14-em-1

Summary of KSR13

  • Page 1

    M anua l assembly & instruction product introduction tool you may need mechanical parts list plastic parts sticker a module assembly body module assembly head module assembly wheel module assembly sticker a p.1 p.1 p.1 p.2 sticker b & zipper bag p.3 tip p.3 p.2 p.4 p.6 p.9 testing p.8 p.9 boat modul...

  • Page 2: Diagonal Cutter

    1 diagonal cutter alternative energy is the future, so now is the perfect time to start children on the path of learning basic concepts behind these technologies. Fortunately, this product is powered by the sun, there are no batteries required. The robot moves in direct sunlight and allows children ...

  • Page 3: Qty

    Qty 1 sticker a plastic parts b a c e d f1 2 make sure to cut the plastic parts e correctly ..

  • Page 4: Sticker B

    X 9 sticker b 3 qty 9 qty 1 zipper bag tip for easy identification of each plastic part, suggest to sort out plastic parts and put them into zipper bags as per instruction. ( p.S. Each zipper bag to be placed an illustrated sticker b (as below) first.).

  • Page 5: Body Module Assembly

    4 body module assembly finished product 1 b 2 b p3(yellow) p1 p5(red) 1 2 a10 p8 p5(red) c4 p6(green) p4 1 3 2.

  • Page 6

    5 p6(green) p5(red) p1 p4 c4 c5 b6 c5 d2 a11 d1 back 3 b.

  • Page 7: Head Module Assembly

    6 head module assembly finished product 1 h 2 h p7 x 2 c3 c8 c8 06 06 07 07 a4 01 02 p2.

  • Page 8

    7 3 h 4 h 5 h a3 a3 b10 b11 x 2 09 a3 a5 a6 c9 2 1.

  • Page 9: 01  Assembly

    Prepare the below parts first before you test the “gear box” and “solar panel”. 01 assembly 03 testing 04 trouble shooting 02 wiring body head c6 x 2 (gear box) (solar panel) testing : you need to test the gear box first. 8 head body c6 c6 positive negative red black sun or 50w & up halogen make sur...

  • Page 10: Wheel

    Cut off the two burrs before assembly. 9 wheel module assembly a12 f1 x 4 b2 (or b1) 05 x 2 04 x 2 c1 08 x 3 x 8 b1 (or b2) 05 x 2 04 x 2 b8 03 x 4 x 3 sticker a.

  • Page 11: Valley Fold

    Valley fold mountain fold form the boat 10 boat module assembly p9.

  • Page 12

    11 a9 x 4 e13 x 4.

  • Page 13: Tips  (

    12 tips ( when your part’s stuck. ) example 1 press! Push in! Pull out! E3 gear box e6 b4 example 2 example 3.

  • Page 14: Level 1

    13 level 1 level 2 p.14 p.19 p.27 p.37 p.22 p.32 p.42 walker-bot wheel-bot beetle-bot turtle-bot quadru-bot boat-bot dog-bot 01 03 05 07 02 04 06 p.46 p.50 p.60 p.71 p.55 p.66 p.76 roly poly-bot surf-bot boxer-bot row-bot crab-bot slither-bot auto-bot 08 10 12 14 09 11 13 14 robot modes.

  • Page 15: 01 Turtle-Bot Assembly

    Prepare the below parts first before you assemble the “turtle-bot”. X 2 b3 b3 e6 b4 01 03 body head a2 x 2 a8 x 2 c1 x 4 b8 x 3 b3 x 4 b4 x 2 c2 x 1 c7 x 4 e1 x 2 e3 x 2 e4 x 4 e7 x 4 e8 x 5 e6 x 4 x 2 e7 e3 b8 e7 02 e1 e8 e1 e14 x 2 e5 x 4 01 turtle-bot assembly level 1 14 1:1 1:1 b8 c2.

  • Page 16

    E8 e8 e8 2 3 01 03 03 02 01 01 body e4 e4 e4 e4 04 1 01 2 01 01 04 15 1 1 1 02 front front front 2 e8 check the gear box engagement by rotating it with a finger, and make sure it is running smoothly. Ensure all shafts between panels 03 & 03 are properly installed and set in the right position..

  • Page 17

    Front 16 c7 x 2 c7 x 2 e8 e8 c1 c1 c1 c1 e14 e14 3 01 4 01 front.

  • Page 18: Turn

    17 5 01 e5 e5 a8 a2 a2 a8 front front turn 90

  • Page 19: Head

    18 black red 6 01 head 2 2 1 black red head body red black neck angle.

  • Page 20: 02 Walker - Bot Assembly

    E7 e3 b8 e7 b4 01 02 b4 e8 e8 body head a1 x 1 a2 x 1 b5 x 2 b4 x 2 a8 x 1 a7 x 1 b8 x 1 b9 x 2 02 walker - bot assembly level 1 e4 x 2 e7 x 2 e8 x 2 e6 x 6 e14 x 2 e5 x 4 c7 x 2 e3 x 1 1 01 1:1 19 prepare the below parts first before you assemble the “walker-bot”. Ensure all shafts between panels b...

  • Page 21

    Check the gear box engagement by rotating it with a finger, and make sure it is running smoothly. 20 03 body e6 e6 c7 e8 e8 c7 03 01 3 02 2 02 1 02 front front front front.

  • Page 22: Turn

    21 e4 e14 b5 e5 e5 a7 b9 a2 e6 e4 a1 e5 e14 a8 b9 b5 e6 e5 front front 4 02 turn 90

  • Page 23: Red

    22 head red black body neck angle 5 02 red black head 1 black red body head a2 x 2 a8 x 2 b8 x 4 b3 x 2 b4 x 2 c2 x 2 c7 x 4 e1 x 6 e3 x 2 e2 x 2 e5 x 4 e7 x 4 e8 x 1 e6 x 6 03 quadru-bot assembly level 1 2 2 prepare the below parts first before you assemble the “quadru-bot”..

  • Page 24

    B8 c2 1:1 1:1 1:1 1:1 23 x 2 e2 e2 e6 b4 b3 b3 b4 e6 c2 e1 e1 e1 e1 e8 b8 e1 e1 e3 b8 e7 e7 01 02 03 05 04 06.

  • Page 25

    24 07 3 e6 body e6 01 02 03 07 1 03 2 03 03 04 03 01 02 1 1 2 2 2 04 06 03 05 front front front check the gear box engagement by rotating it with a finger, and make sure it is running smoothly. Ensure all shafts between panels 05 & 06 are properly installed and set in the right position..

  • Page 26

    25 c7 c7 3 03 4 03 e5 e5 a8 a2 right front front.

  • Page 27: Red

    26 head 5 03 6 03 red black black red a8 a2 e5 e5 2 2 1 head red black body left front neck angle.

  • Page 28: Level 1

    Level 1 27 01 c1 c1 c1 x 2 c1 04 wheel-bot assembly body head wheel x 4 b4 x 2 c1 x 8 c6 x 2 b1 x 3 b2 x 3 e14 x 14 e10 x 2 e8 x 6 e6 x 4 a1 x 1 a7 x 1 prepare the below parts first before you assemble the “wheel-bot”..

  • Page 29

    02 b1 x 3 (or b2 x 3) wheel 01 c6 e8 x 3 e14 x 3 e14 x 3 28.

  • Page 30

    01 wheel 03 b2 x 3 (or b1 x 3) e14 x 3 e14 x 3 29 c6 e8 x 3.

  • Page 31

    Body e6 a1 e10 b4 e14 a7 e10 wheel e6 e6 1 04 e14 30 front back back.

  • Page 32: Red

    Neck angle 03 02 2 2 2 04 3 04 head red black head body red black black red 1 31.

  • Page 33: Level 1

    Level 1 32 01 c1 c1 c1 x 2 c1 05 boat-bot assembly body head wheel x 2 b4 x 2 c1 x 8 c6 x 2 b1 x 3 b2 x 3 e14 x 12 e4 x 8 e6 x 4 boat e9 x 2 e8 x 6 prepare the below parts first before you assemble the “boat-bot”..

  • Page 34

    02 b1 x 3 (or b2 x 3) wheel 01 e14 x 3 e14 x 3 33 c6 e8 x 3 e4 x 4.

  • Page 35

    01 wheel 03 b2 x 3 (or b1 x 3) e14 x 3 e14 x 3 34 c6 e8 x 3 e4 x 4.

  • Page 36: Turn

    B4 boat 1 05 e9 x 2 front front 35 e6 e6 body body turn 180 back front.

  • Page 37: Red

    Black red head body neck angle red black 03 02 2 2 head 2 05 3 05 red black 1 36 front.

  • Page 38: Level 1

    Level 1 body head b4 x 2 b8 x 3 c2 x 3 e6 x 8 e11 x 4 e12 x 2 01 02 b3 e1 e8 b8 e1 b4 e6 x 2 x 2 b1 x 3 b2 x 3 e7 x 6 e1 x 4 e8 x 2 e3 x 3 b3 x 4 06 beetle-bot assembly level 1 1:1 37 prepare the below parts first before you assemble the “beetle-bot”..

  • Page 39

    B8 c2 04 03 05 e7 e3 e7 e3 e7 c2 01 01 02 02 03 03 04 x 2 1:1 1:1 e7 38 ensure all shafts between panels 01 & 01 are properly installed and set in the right position..

  • Page 40

    03 04 03 02 02 e11 e11 e11 e12 e12 e11 05 1 06 2 06 e6 e6 body front front front 39 check the gear box engagement by rotating it with a finger, and make sure it is running smoothly. Front.

  • Page 41

    B2 (or b1) b2 (or b1) b1 (or b2) b1 (or b2) b2 (or b1) b1 (or b2) 4 06 3 06 40 front front left right.

  • Page 42: Head

    Black red 5 06 neck angle red black head head body red black 2 2 1 41.

  • Page 43: Level 1

    E1 x 4 e3 x 2 e7 x 4 e8 x 3 e6 x 5 e14 x 3 e10 x 2 e11 x 2 42 level 1 body head b4 x 2 b5 x 2 b8 x 2 b7 x 1 a2 x 1 b3 x 2 b1 x 1 a8 x 1 b2 x 1 c2 x 3 01 02 07 dog-bot assembly e1 e8 e1 1:1 1:1 b8 c2 e7 e3 b8 e7 prepare the below parts first before you assemble the “dog-bot”..

  • Page 44

    03 04 05 07 06 e7 e3 c2 b7 e7 e6 b4 b3 e1 e8 e14 b5 e6 b3 b4 e6 e8 c2 e1 01 05 04 4 1:1 1:1 06 3 3 2 2 03 1 02 43 ensure all shafts between panels 06 & 04 are properly installed and set in the right position..

  • Page 45

    Front front body e10 e14 a8 a2 e14 e10 e6 e6 e8 01 02 03 05 07 1 07 front 44 check the gear box engagement by rotating it with a finger, and make sure it is running smoothly..

  • Page 46: Red

    Movement 1 : shaking & wagging tail! Neck angle 2 2 b2 (or b1) e11 e11 b1 (or b2) red black 2 07 3 07 head black red 1 movement 2 : jumping & wagging tail! 45 head body red black.

  • Page 47: 08 Auto-Bot Assembly

    X 2 46 01 02 body head b4 x 2 b8 x 4 wheel x 4 b3 x 4 e11 x 4 e7 x 2 e1 x 10 e8 x 7 e3 x 2 c2 x 4 e6 x 8 e14 x 2 e4 x 4 c1 x 2 08 auto-bot assembly level 2 e7 e3 c2 e7 e8 e1 e1 1:1 1:1 b8 c2 prepare the below parts first before you assemble the “auto-bot”..

  • Page 48

    03 e1 e8 c2 e1 04 e1 e8 b8 x 2 e1 06 b3 b4 e6 x 2 05 b4 e6 b3 b3 07 e3 06 05 02 01 03 01 04 04 47 1:1 1:1 1 2 2 2 ensure all shafts between panels 05 & 06 are properly installed and set in the right position..

  • Page 49

    E3 02 1 08 e6 e6 body 07 e11 e11 e4 x 2 e4 x 2 wheels wheels e11 e11 48 front check the gear box engagement by rotating it with a finger, and make sure it is running smoothly. 01 04 03 04 01.

  • Page 50: Red

    Head body red black black red neck angle black head red 1 e14 c1 e8 c1 e14 2 08 3 08 49 2 2.

  • Page 51: 09 Crab-Bot Assembly

    09 crab-bot assembly level 2 50 e14 x 4 e5 x 8 e4 x 10 e7 x 4 e1 x 2 e8 x 1 e3 x 2 body head a2 x 2 b4 x 2 b8 x 3 c2 x 1 c7 x 4 a8 x 2 b1 x 2 b2 x 2 b5 x 2 b9 x 2 e1 e7 e3 b8 e7 e8 e1 b8 c2 x 2 b4 b4 01 02 x 2 1 2 2 3 01 03 02 1:1 1:1 prepare the below parts first before you assemble the “crab-bot”....

  • Page 52

    04 1 09 01 02 02 body e4 x 2 c7 c7 x 2 e4 04 51 check the gear box engagement by rotating it with a finger, and make sure it is running smoothly..

  • Page 53: Turn

    52 2 09 a8 a2 turn 180 e5 x 2 a8 a2 e5 x 2 front left right back back.

  • Page 54

    53 3 09 4 09 5 09 b2 (or b1) b1 (or b2) e14 x 2 e14 x 2 e5 e4 b1 (or b2) e5 e4 b2 (or b1) b5 b5 e5.

  • Page 55: Red

    Head body red black 54 6 09 7 09 neck angle red black head black red b9 e4 e4 e4 e4 b9 1 2 2.

  • Page 56: 10 Slither-Bot Assembly

    10 slither-bot assembly level 2 01 02 1:1 1:1 55 e1 e7 e3 b8 e7 e8 e1 body head wheel x 4 b4 x 2 b8 x 2 c2 x 1 c7 x 2 e6 x 6 e3 x 2 e8 x 3 e1 x 6 e5 x 12 e10 x 4 e12 x 2 e7 x 4 b5 x 1 c1 x 8 a1 x 1 a7 x 1 b3 x 4 c6 x 1 b7 x 1 b8 c2 prepare the below parts first before you assemble the “slither-bot”....

  • Page 57

    56 03 04 05 06 07 e1 e8 e7 e3 e7 c6 e1 e1 e9 b5 e8 e1 b3 b4 e6 x 2 c1 c1 c1 c1 e5 e5 e5 1:1 1:1 1:1 b7.

  • Page 58

    02 01 03.

  • Page 59

    58 body e10 e6 e6 e10 1 10 c7 09 c7 2 10 05 08 04 07.

  • Page 60: Turn

    A1 3 10 4 10 e12 e12 wheel wheel e5 a7 e5 59 turn 90

  • Page 61: Red

    Head body red black neck angle prepare the below parts first before you assemble the “roly poly-bot”. 11 roly poly-bot assembly level 2 black red red black head 1 2 2 body head wheel x 2 b8 x 4 a2 x 2 a8 x 2 b1 x 2 b2 x 2 e4 x 8 e14 x 10 c1 x 8 c6 x 2 5 10 60

  • Page 62

    01 1 11 c1 c1 c1 c1 x 2 body e14 x 2 e4 x 2 (or b2) b1 b2 (or b1) e4 e4 b8 b8 c6 61 back.

  • Page 63

    2 11 01 wheel e14 x 3 62.

  • Page 64

    63 3 11 4 11 a2 a8 e14 x 2 e4 x 2 (or b2) b1 b2 (or b1) e4 e4 b8 b8 c6.

  • Page 65

    64 5 11 01 wheel e14 x 3.

  • Page 66: Red

    Head body red black neck angle 65 7 11 6 11 red black head 2 2 1 black red a2 a8.

  • Page 67: 12 Boxer-Bot Assembly

    66 12 boxer-bot assembly level 2 1:1 1:1 01 02 body head b4 x 2 a8 x 1 a1 x 1 a7 x 1 a2 x 1 b1 x 3 b2 x 3 b3 x 4 b8 x 4 c2 x 2 b9 x 2 c7 x 2 c6 x 2 b8 c2 e1 e8 e1 e1 e8 b8 e1 e6 x 8 e8 x 4 e1 x 6 e7 x 4 e11 x 2 e9 x 4 e3 x 2 e14 x 2 e5 x 4 e10 x 2 e4 x 2 prepare the below parts first before you asse...

  • Page 68

    67 03 04 05 06 e1 e8 b3 b4 c2 e1 e7 e3 b8 e6 x 2 e7 x 2 x 2 01 03 05 e8 02 04 05 04 e8 01 02 04 04 03 1:1 1:1 ensure all shafts between panels 05 & 05 are properly installed and set in the right position. Check the gear box engagement by rotating it with a finger, and make sure it is running smoothl...

  • Page 69

    68 1 12 e6 e6 body 06 c7 c7 c6 c6 e11 e11 e9 x 2 b9 x 2.

  • Page 70: Turn

    69 2 12 e5 e5 e5 a8 a7 e9 a2 a1 e5 e9 turn 90

  • Page 71: Red

    Neck angle black red head body red black 70 red black head 4 12 3 12 b1 (or b2) e14 (or b1) b2 e10 e4 b1 (or b2) e10 e4 e14 (or b1) b2 1 2 2.

  • Page 72: Turn

    E6 e6 turn 180 c6 body body c6 1:1 71 13 surf-bot assembly level 2 body head b4 x 2 boat a8 x 2 b5 x 2 c1 x 4 a1 x 1 a7 x 1 a2 x 2 c6 x 2 b1 x 3 b2 x 3 01 1 13 e1 e8 b5 e1 x 2 e1 x 4 e8 x 2 e10 x 4 e4 x 10 e9 x 2 e5 x 6 e6 x 4 front back prepare the below parts first before you assemble the “surf-bo...

  • Page 73

    72 b4 e9 e9 e4 e4 boat 2 13 left right back back.

  • Page 74

    73 a7 a1 c1 c1 c1 c1 e5 e5 e5 e5 front back 01 01 3 13 4 13 left right left right.

  • Page 75: Turn

    Back 74 5 13 b1 (or b2) b2 (or b1) e10 x 2 e4 e4 e4 a8 a8 a2 a2 e5 e5 e4 e4 x 2 front turn 180 1 1 1 1 1 1 2 2 2 2.

  • Page 76: Red

    Head body red black neck angle 75 red black 7 13 head 1 2 2 black red b1 (or b2) (or b1) b2 e10 x 2 e4 x 2 front front 6 13.

  • Page 77: 14 Row-Bot Assembly

    14 row-bot assembly level 2 body head b4 x 2 boat a9 x 2 a8 x 2 b5 x 2 c1 x 6 a1 x 1 a7 x 1 a2 x 2 c6 x 2 e9 x 2 e1 x 4 e8 x 4 e4 x 8 e5 x 4 e6 x 6 e6 e6 turn 180 1:1 76 01 02 1 14 e1 e8 b5 e1 x 2 c1 c1 e4 e4 x 2 c6 body body c6 back front prepare the below parts first before you assemble the “row-b...

  • Page 78

    B4 b4 a9 a9 e6 left right 77 e9 boat e9 a2 a7 e5 x 2 3 14 2 14 front.

  • Page 79

    78 4 14 5 14 6 14 e8 e8 c1 c1 e4 a8 e4 e4 front a1 a8 e5 x 2 01.

  • Page 80

    79 7 14 02 02 8 14 left right left right 01 front e4 a2.

  • Page 81: Red

    Black red head body red black neck angle 80 1.Take outside under direct sunlight. Best results are obtained when operated on a sunny day. 2.For indoor fun, use a 50 watt halogen light. The product will not run on a cloudy day, shaded locations, indirect sunlight, or under a fluorescent light. It’s t...

  • Page 84

    4350006151 copyright © 2013 cic. All rights reserved.