1. DL manuals
  2. Velleman
  3. Inverter
  4. PI30024
  5. User Manual

Velleman PI30024 User Manual

Summary of PI30024

  • Page 1

    Dc to ac power inverter power : 300w pi300m for input voltage 12v pi30024 for input voltage 24v user manual gebruikershandleiding manuel d'utilisation bedienungsanleitung attention – opgelet - achtung overloading this device or connecting it with an inductive load (e.G. Refrigerator, fan, drill) wil...

  • Page 2

    Pi300m & pi30024 v2 gb 1 "turn on" secondly "turn on" firstly 1. Description 2. Connections connect to lighter for appliances 0-150w or connect directly to battery (clips included) for appliances of 150-300w. The length of the cable is ≤ 2m. Please verify if you have chosen the right operating volta...

  • Page 3

    Pi300m & pi30024 v2 gb 2 4. Output capacity the inverter will switch off automatically if the total wattage of the electrical appliances exceeds the inverter's output capacity. This will also happen if the temperature of the inverter exceeds 55°c due to prolonged use. 5. Special recommendations unpl...

  • Page 4

    Pi300m & pi30024 v2 gb 3 6. Adding extension cords we recommend that the buyer refrain from using an extension cord between the dc power source and the inverter's dc input. Connecting an extension cord to the dc input will create a voltage drop, entailing reduced efficiency and output. Instead, we r...

  • Page 5: Bad

    Pi300m & pi30024 v2 gb 4 bad good 8. Fuse please check the fuse if the voltage indicator is not lit during operation. Replace blown fuses with an identical one. Fuse : max. 35a for a 12v inverter or 20a for a 24v inverter. 9. Measuring ac voltages the output wave of the ac inverter is a modified sin...

  • Page 6

    Pi300m & pi30024 v2 gb 5 11. Chassis earthing the chassis earthing lug should be connected to an earthing point. This point will vary depending on where the power inverter is installed. If the power inverter is installed in a vehicle, you should connect the chassis ground lug to the chassis of the v...

  • Page 7

    Pi300m & pi30024 v2 gb 6 13. Maintenance very little maintenance is required to keep your inverter operating smoothly. Clean the exterior of the device periodically using a damp cloth in order to prevent the accumulation of dust and dirt. Tighten the screws on the dc input terminals whenever you are...