Velleman VLT12-300 Owner's Manual - 1 Introduction

Manual is about: VLT Series 300 Watt True Sine Wave Inverter

Page of 12

Download

Print this page

Bookmark us

VANNER

Incorporated

Owner’s Manual

300 Watt VLT Series Inverter Owner’s Manual - 3 -

1 INTRODUCTION

Thank you for purchasing a Vanner 300 Watt VLT SERIES Inverter. We are confident that you will be

satisfied with the inverter’s performance and its many features. With proper installation and care, you can

look forward to years of service from this high performance product.

This document will describe the operation, technical specifications and installation procedures.

2 IMPORTANT SAFETY INSTRUCTIONS

Electrocution hazard exists

Fire hazard exists

A potentially dangerous condition

Explosive hazard exists

Corrosive hazard exists

To get the most out of the power inverter, it must be installed and used properly. Please read the

instructions in this manual before installation. Keep this manual for future reference.

General Safety Precautions

Do not expose the inverter to rain, snow, spray, or dust. To reduce risk of hazard, do not obstruct

the ventilation openings. Do not install the inverter in a zero-clearance compartment. Overheating may

result.

To avoid a risk of fire and electric shock, make sure the wiring is in good electrical condition

and is proper gauge. Do not operate the inverter with damaged or substandard wiring.

This equipment contains components that can produce arc or sparks. To prevent fire or

explosion, do not install in compartments containing batteries or flammable materials or in locations which

require ignition protected equipment This includes any space containing gasoline-powered machinery,

fuel tanks, or joints, fittings, or other connection between components of the fuel system

« ‹ Prev 1 2 3 4 5 6 7 Next › »

Summary of VLT12-300

Page 1
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 1 - vlt series 300 watt true sine wave inverter models vlt12-300 vlt24-300 pure sine wave inverter vout remote control power status i 0 ac output on off vin.
Page 2
Vanner incorporated owner’s manual - 2 - 300 watt vlt series inverter owner’s manual table of contents 1 introduction ....................................................................................................... 3 important safety instructions .................................................
Page 3: 1 Introduction
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 3 - 1 introduction thank you for purchasing a vanner 300 watt vlt series inverter. We are confident that you will be satisfied with the inverter’s performance and its many features. With proper installation and care, yo...
Page 4
Vanner incorporated owner’s manual - 4 - 300 watt vlt series inverter owner’s manual precautions when working with batteries if battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood eye with running cold water for at least 20 minutes and ...
Page 5
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 5 - 3 specifications and features 3.1 specifications model number specifications vlt12-300 vlt24-300 ac power output rated continuous output 300 watts surge rating 400 watts output waveform true sine wave total harmonic...
Page 6
Vanner incorporated owner’s manual - 6 - 300 watt vlt series inverter owner’s manual 3.2 front panel on / off control switch the on/off switch must be in the on position when using remote control. Remote control terminal a green two-terminal connector located on the front panel allows remote on/off ...
Page 7
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 7 - power status led led display and color flash pattern status solid green ac power ok blinking red fast dc over voltage blinking red slowly dc under voltage blinking red intermittently over temperature solid red ac ov...
Page 8
Vanner incorporated owner’s manual - 8 - 300 watt vlt series inverter owner’s manual 3.3 rear panel chassis ground reverse polarity will damage unit. Warning: (+) pos (-) neg dc input use female anderson pp75 connector only. Dc input terminals dc input terminals are anderson power claw for use with ...
Page 9: 4 Installation
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 9 - 4 installation 4.1 inverter installation considerations mounting: locate a flat secure, dry, horizontal or vertical surface large enough to mount the inverter. The location should be as close to the battery as pract...
Page 10
Vanner incorporated owner’s manual - 10 - 300 watt vlt series inverter owner’s manual dc cable and fuse sizing chart model number vlt12-300 vlt24-300 distance from battery to inverter in feet (total circuit length is 2 times the distance.) wire size 12 nr 11.6 10 5.5 17.5 8 9.3 20 6 14.4 20 4 20 20 ...
Page 11: Trouble Shooting
Vanner incorporated owner’s manual 300 watt vlt series inverter owner’s manual - 11 - 5 trouble shooting warning! Do not open or disassemble the inverter. Attempting to service the unit yourself may result in a risk of electrical shock or fire, and will void warranty. Problems and symptoms possible ...
Page 12
Vanner incorporated owner’s manual - 12 - 300 watt vlt series inverter owner’s manual vanner incorporated 4282 reynolds drive hilliard, ohio 43026 ph: 1-800-ac power ph: 614-771-2718 fax: 614-771-4904 www.Vanner.Com manual p/n: d914634-b march 11, 2011.