Bg-c12 battery grip designed for the canon 7d mark ii dslr camera user’s manu al.
Introduction thank you for choosing vello and congratulations on your new bg-c12 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The vello bg-c12 is compatible w...
Precautions 1. The bg-c12 should be used only with compatible devices specified in this manual. 2. Use only with batteries and battery holders recommended in this manual. 3. Cover the power terminals with the contact cap when the bg-c12 is not in use. This prevents electrical shorts caused by metal ...
Overview 4 6 7 12 13 14 1 15 19 20 9 2 5 8 21 22 3 18 16 17 11 10 4.
1 contact cap protects grip contacts. Keep covered when the grip is not in use. 2 electrical contacts communicates with the camera electronics. 3 mounting screw aligns with the camera’s tripod socket. 4 guide pin helps align the camera to the grip. 5 battery tray lever locks and unlocks the battery ...
Attaching the grip 1. Ensure that the power is turned off on the camera and that the control-lock switch is set to off on the battery grip. 2. Remove the battery from the camera battery compartment. 3. Open the camera battery chamber cover and remove as indicated above. 4. To prevent loss, place the...
Into the compartment. Pull the door’s release latch down (2) and insert the top of the door into the compartment (3) as indicated by the arrows. Swing the door shut to lock it in place. 5. Remove the protective cap and connect the bg- c12 grip to the camera, while aligning the grip’s mounting screw ...
Inserting batteries 1. Ensure that the power is turned off on the camera and the grip. Use your fingernail to flip out the battery tray lever so you can rotate and pull as indicated above, and slide the battery tray out of the grip. 2. Canon lp-e6 batteries: insert up to two batteries by placing the...
4. Rotate the battery tray lever counterclockwise and slide the battery tray all the way into the grip. Rotate the lever clockwise and push it back into place to lock the tray. 5. Switch the grip control- lock to on and then turn on the camera’s power. Check the battery level in the control panel or...
Specifications power source 1. One or two canon lp-e6 rechargeable batteries 2. Six aa/lr6 alkaline batteries 3. Works with the canon ac adapter kit ack-e6 (sold separately) operating temperature 32°f–104°f (0°c–40°c) dimensions (w × h × d) 5.9˝ × 4.5˝ × 3.4˝ (15.3 × 11.3 × 8.6 cm) weight 12 oz. (34...
One-year limited warranty this vello product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty ...
© copyright 2015 gradus group llc all other trademarks are the property of their respective owners gg1 www.Vellogear.Com.
