Bg-c14 battery grip designed for the canon 5d mark iv slr camera user ’s manu al.
Introduction thank you for choosing vello, and congratulations on your new bg-c14 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in portrait orientation. The vello bg-c14 is compatible with the cano...
Precautions 1. The bg-c14 should be used with the compatible devices specified in this manual. 2. Use only with the batteries and battery holders recommended in this manual. 3. Cover the power terminals with the contact cap when the bg-c14 is not in use. This prevents electrical shorts caused by met...
Overview 4 6 7 11 9 12 10 13 1 14 19 18 20 2 5 8 21 3 17 15 16 4.
1 contact cap protects grip contacts. Keep covered when the grip is not in use. 2 electrical contacts communicate with the camera electronics. 3 mounting screw aligns with the camera’s tripod socket. 4 guide pin helps align the camera to the grip. 5 battery tray lever locks and unlocks the battery c...
Attaching the grip 1. Ensure that the power is turned off on the camera and that the power switch is set to off on the battery grip. 2. O p e n t h e c a m e r a battery chamber cover, and remove the battery from the camera battery compartment. 3. Slide the camera battery chamber cover’s locking pin...
4. To prevent loss, remove the protective cap and place the camera battery chamber cover into the bg-c14 battery chamber holder as indicated above. Swing the battery chamber cover shut so that it locks into place. 5. Connect the bg-c14 grip to the camera. 6. Rotate the attachment wheel in the direct...
Inserting batteries 1. Ensure that the power is turned off on the camera and the grip. Use your fingernail to protrude the battery tray lever so you can rotate and pull as indicated above, and slide the battery tray out of the grip. 2. Canon lp-e6 or lp-e6n batteries: insert up to two batteries by p...
3. Rotate the battery tray lever counterclockwise, and slide the battery tray all the way into the grip. Rotate the lever as indicated above, and push the it back into place to lock the tray. 4. Switch the grip power to on, and then turn on the camera’s power. Check the battery level in the control ...
Specifications power source 1. One or two canon lp-e6 or lp-e6n rechargeable batteries 2. Works with the canon ac adapter kit ack-e6 (sold separately) operating temperature 32°f–104°f (0°c–40°c) dimensions 5.9 × 4.6 × 3.3 in. (15.0 × 11.7 × 8.5 cm) weight 10.9 oz. (308 g) excluding batteries specifi...
One-year limited warranty this vello product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty ...
© copyright 2017 gradus group llc all other trademarks are the property of their respective owners gg1 www.Vellogear.Com.
