Bg-c15 battery grip designed for the canon t7i and 77d dslr cameras user ’s manu al.
Introduction thank you for choosing vello and congratulations on your new bg-c15 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The vello bg-c15 is compatible w...
Precautions 1. The bg-c15 should be used only with compatible devices specified in this manual. 2. Use only with the batteries and battery holders recommended in this manual. 3. If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Remove the batteries, ...
Overview 1 6 2 3 7 17 5 4 8 11 13 10 9 12 14 16 15 4.
1 shutter release button 2 camera battery door holder 3 hand-strap mount 4 tripod socket 5 nonslip grip 6 cable-release socket 7 battery tray compartment 8 thumbwheel lock 9 mounting screw 10 power contacts 11 contact cap 12 battery tray 13 battery tray lock 14 battery slots 15 battery slot contacts...
Attaching the grip 1. Ensure that the camera power is turned off. 2. Turn the camera upside down, and open its battery chamber door. Pull gently at a 45° angle until the chamber door detaches. 3. Slide the camera battery chamber door into the bg-c15’s chamber door holder for safekeeping. 6.
4. Insert the bg-c15’s power contacts into the camera’s battery chamber as shown. Make sure to align the camera’s tripod socket with the bg-c15’s mounting screw. 5. Rotate the locking wheel counterclockwise until it is firmly tightened. 6. Connect the shutter release cable from the cable release soc...
Inserting batteries 1. Twist the battery tray’s lock counterclockwise, and remove the battery tray from the grip. 2. Make sure the contacts for the batteries match the battery slot contacts of either side of the battery tray. 3. Insert the battery toward t h e co n t a c t s , a n d i n between the ...
When removing the grip, turn off the camera power and remove the batteries. 4. Repeat steps 2 and 3 for the second battery. 5. Insert and lock the battery tray inside the battery grip. 9 o ve r vi ew as se mb ly in t r od u c t io n.
Removing the batteries 1. Twist the battery tray lock counterclockwise, and remove the battery tray from the grip. 2. Remove either battery by pulling up and lifting it out of the battery tray. 10
Power source up to two lp-e17 rechargeable li-ion batteries operating temperature 32°f to 104°f (0°c to 40°c) dimensions 3.9 × 5.1 × 3.2 in. (10 × 13.1 × 8 cm) weight 5.1 oz. (145 g) without battery holder and batteries specifications 11 o ve r vi ew in t r od u c t io n as se mb ly as se mb ly in t...
© copyright 2017 gradus group llc all other trademarks are the property of their respective owners. Gg1 www.Vellogear.Com one-year limited warranty this vello product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of...
