Bg-c2 battery grip designed for the canon 5d mark ii slr camera user ’s manu al.
Introduction thank you for choosing vello and congratulations on your new bg-c2 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The vello bg-c2 is compatible wit...
Precautions 1. The bg-c2 should only be used with compatible devices specified in this manual. 2. Only use with batteries and battery holders recommended in this manual. 3. Cover the power terminals with the contact cap when the bg-c2 is not in use. This prevents electrical shorts caused by metal ob...
Overview 13 14 15 12 11 10 9 1 3 4 5 6 7 16 17 18 19 20 8 8 2 4.
1 contact cap protects grip contacts. Keep covered when the grip is not in use. 2 electrical contacts communicates with the camera electronics. 3 camera battery chamber cover holder stores the cover when the grip is mounted. 4 grip power on/off 5 af start button 6 ae lock/fe lock/index/reduce button...
Attaching the grip 1. Ensure that the power is turned off on the camera and that the power switch is set to off on the battery grip. 2. Remove the battery from the camera battery compartment. 3. Open the camera battery chamber cover and remove as indicated above.. 2 1 6.
4. To prevent loss, place the camera battery chamber cover into the bg-c2 battery chamber holder. 5. Remove the protective cap and connect the bg- c2 grip to the camera, while aligning the grip’s mounting screw with the camera’s tripod socket. 6. Rotate the attachment wheel in the direction shown by...
Inserting batteries 1. Ensure that the power is turned off on the camera and grip. Slide the battery compartment lever as indicated above and open the battery chamber door. Press both release levers outward and remove the aa battery holder. 2. Canon lp-e6 batteries: insert up to two batteries by sli...
4. Slide the aa holder into the grip until it clicks into place. Close the battery compartment. 5. Switch the grip power to on and then turn on the camera’s power. Check the battery level in the control panel or viewfi nder. 6. Household power outlet: the canon ack-e8 ac power adapter kit (sold sepa...
Specifications power source 1. One or two canon lp-e6 rechargeable batteries 2. Six aa/lr6 alkaline batteries 3. Works with the canon ac adapter kit ack-e8 (sold separately) operating temperature 32 – 104 °f (0 – 40 °c) dimensions approximately 149.1 x 114.3 x 76.3 mm/5.9 × 4.5 x 3 in. Weight approx...
Warranty vello provides a limited warranty that this product is free from defects in materials and work- manship to the original purchaser under normal use for a period of one (1) year from the original purchase date. Vello’s responsibility with respect to this limited warranty shall be lim- ited so...
© copyright 2010 vello inc. All other trademarks are the property of their respective owners www.Vellogear.Com.
