Bg-c9 battery grip designed for the canon 5d mark iii slr camera user’s manu al.
Introduction thank you for choosing vello and congratulations on your new bg-c9 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The vello bg-c9 is compatible wit...
Precautions 1. The bg-c9 should only be used with compatible devices specified in this manual. 2. Only use with batteries and battery holders recommended in this manual. 3. Cover the power terminals with the contact cap when the bg-c9 is not in use. This prevents electrical shorts caused by metal ob...
Overview 4 6 7 11 12 13 1 14 18 19 9 2 5 8 20 21 3 17 15 16 10 4.
1 contact cap protects grip contacts. Keep covered when the grip is not in use. 2 electrical contacts communicates with the camera electronics. 3 mounting screw aligns with the camera’s tripod socket. 4 guide pin helps align the camera to the grip. 5 battery tray lever locks and unlocks the battery ...
Attaching the grip 1. Ensure that the power is turned off on the camera and that the power switch is set to off on the battery grip. 2. Remove the battery from the camera battery compartment. 3. Open the camera battery chamber cover and remove as indicated above. 6.
4. To prevent loss, place the camera battery chamber cover into the bg-c9 battery chamber holder. As indicated above. Swing the battery chamber cover shut so that it locks into place 5. Remove the protective cap and connect the bg- c9 grip to the camera, while aligning the grip’s mounting screw with...
Inserting batteries 1. Ensure that the power is turned off on the camera and the grip. Use your fingernail to protrude the battery tray lever so you can rotate and pull as indicated above, and slide the battery tray out of the grip. 2. Canon lp-e6 batteries: insert up to two batteries by placing the...
4. Rotate the battery tray lever counterclockwise and slide the battery tray all the way into the grip. Rotate the lever as indicated above and push the it back into place to lock the tray. 5. Switch the grip power to on and then turn on the camera’s power. Check the battery level in the control pan...
Specifications power source 1. One or two canon lp-e6 rechargeable batteries 2. Six aa/lr6 alkaline batteries 3. Works with the canon ac adapter kit ack-e6 (sold separately) operating temperature 32 – 104 °f (0 – 40 °c) dimensions approximately 6.0 × 4.5 × 3.4 in. (153.1 × 113.3 × 85.7 mm) weight ap...
Warranty vello provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement whichever occurs later. Our responsibility with...
© copyright 2012 gradus group. All other trademarks are the property of their respective owners www.Vellogear.Com.
