Velocitek SpeedPuck User Manual - page 6
Signal Acquisition
3
Signal Acquisition
The operation of the SpeedPuck relies on low-power radio signals from GPS satellites that orbit the earth
at an altitude of approximately 20,000 km. As a result, the SpeedPuck must be outdoors with a clear
view of the sky to function properly.
When the SpeedPuck is first turned on, it must download information from GPS satellites before it can
acquire a GPS solution. The data download process normally takes 1-2 minutes or up to 5 minutes if
fresh batteries have just been installed.
Installation Guide
The SpeedPuck can be installed anywhere on the boat with a view of the sky. The SpeedPuck comes
with dual lock, an industrial strength Velcro, on the back for easy installation. Several mounting options
are available. For details, go to
http://www.velocitek.com/products/mounting-hardware
.
GPS Data Storage
The SpeedPuck records GPS data whenever the device is on and GPS signal is detected. The device can
be configured to record data every second, every 2 seconds or every 4 seconds. The SpeedPuck can
store up to 20 hours of data when recording GPS data every 2 seconds.