Velodyne SubContractor Series SC-1250 Brochure
Summary of SubContractor Series SC-1250
Page 3: What Is The Sc Series?
What is the sc series? • a reference sub for every installation situation – cabinet, wall, floor, ceiling, free standing • spl-r performance • outboard amplifier – runs up to two subs • standard speaker wire connections.
Page 4: Sc-1250 Amplifier
Sc-1250 amplifier • 1250 watts rms, 3000 watts peak • 7-band auto-eq (mic included) • dsp control • rack mount ears included • remote with presets, phase, etc. Mic input led – volume, crossover, model select ir input crossover control volume control.
Page 5: Sc-1250 Amplifier
Sc-1250 amplifier - continued • easy hookup and setup rs-232 control (crestron certified) mic input control for up to 2 sc subs (protected) 12v trigger ir repeater rca, balanced, speaker level inputs.
Page 6: Subcontractor Subwoofers
Subcontractor subwoofers • 4 models to choose from (hwd): – sc-8: 10 3/4” x 10 ½” x 9 1/8” – sc-10: 12 7/8” x 12 3/8” x 9 1/2” – sc-12: 14 3/4” x 14 3/8” x 10 1/8” – sc-15: 18 3/8” x 18” x 13 3/8” • connects with conventional speaker wire • down-firing or front-firing • fits easily into standard mil...
Page 7
Sc-if (in-floor) / sc-ic (in-ceiling) • dimensions (hwd): – sc-if / sc-ic: 25 3/4” x 14” x 9” • fits between joists • multiple applications • out performs the spl-1200r • 4 mounting brackets included • internal bracing.
Page 8: Sc-Iw In-Wall Subwoofer
Sc-iw in-wall subwoofer driver (fires up or down) standard grill (17” x 13.8”) driver module (thermally protected) cabinet module (pre-installed) designer grill (18” x 4.64”) ¼” thick aluminum sandwich.
Page 9: Sc-Iw In-Wall Driver
Sc-iw in-wall driver • vertically firing t-shaped driver • maximizes driver travel / output • minimizes wall vibration • propriety patent pending driver design • unique “drive shaft” design • neodymium motor structure.
Page 10: Spec Enough Sub(S)!
Spec enough sub(s)! Note: calibrated for high-output bass performance ` 0 1000 2000 3000 4000 5000 6000 room size in cubic feet sc-8 sc-10 sc-iw sc-12 sc-if/ic sc-15 mo d e l velodyne subcontractor series subwoofers room sizing chart 1 subwoofer 2 subwoofers 3 subwoofers 4 subwoofers.
Page 11: A Sub For Every Ci Need!
A sub for every ci need! Sc series = always having a sub for any installation.
Page 12: Sc Series In-Wall Subwoofer
Sc series in-wall subwoofer close-up on the sc-iw (in-wall).
Page 13: In-Wall Driver
In-wall driver the driver.
Page 14: Complete In-Wall Assembly
Complete in-wall assembly with designer grill with standard grill standard grill assembly driver module enclosure module designer grill assembly driver module enclosure module.
Page 15: Complete In-Wall Assembly
Complete in-wall assembly product details driver module accepts mounting of both standard and designer grill versatile mounting tabs – allows for variance in wall construction air tight coupling, with easy installation hardware gold plated spring loaded binding posts to hold and lock wire in place.
Page 16: In-Wall Subwoofer
In-wall subwoofer the in-wall subwoofer ships ready to install for both......... New construction installation - and - retro fit installation.
Page 17: Step 1 –
New construction installation step 1 – get to the wall step 2 – install cabinet module and mudring.
Page 18: Step 3 –
New construction installation step 3 – run wire from velodyne amplifier, thru wall, to location where driver module will install.
Page 19: Step 4 –
New construction installation step 4 – finish wall step 5 – install driver module.
Page 20: Step 6 –
New construction installation step 6 – driver module installed.
Page 21: Step 7 –
New construction installation step 7 – install grill frame.
Page 22: Step 8 –
New construction installation step 8 – install standard metal grill.
Page 23: Retro Fit Installation
Retro fit installation step 2 – a) decide on grill location and cabinet orientation. Typically the unit will be “downward firing” with the grill near the floor b) cut opening in drywall using included template step 1 – get to the wall.
Page 24: Retro Fit Installation
Retro fit installation step 3 – install cabinet module.
Page 25: Retro Fit Installation
Retro fit installation step 4 – run wire from velodyne amplifier, thru wall, to driver module.
Page 26: Retro Fit Installation
Retro fit installation step 5 – install filler plate step 6 – install ½ inch drywall step 7 – mud, tape, texture and painting.
Page 27: Retro Fit Installation
Retro fit installation step 8 – install plastic grill housing.
Page 28: Retro Fit Installation
Retro fit installation step 9 – install metal grill.
Page 29: In-Wall Subwoofer
In-wall subwoofer summary • fits flush to wall • use cabinet module for new construction – minimum $ investment up front • use both modules for retro fit • expect high performance, minimal vibration • run 1 or 2 subwoofers off same amp • use standard grill for easy servicing; designer grill for inte...
Page 30
Question & answer question & answer.
Page 31: The Subcontractor Series
The subcontractor series thank you for attending “introducing the new subcontractor subwoofer series” webinar for more information contact your local velodyne representative or visit us at www.Velodyne.Com.