Velodyne VRP-1200 User Manual - Interconnect Cables

10

10

Interconnect Cables

When installing your new Velodyne subwoofer using the line level

connections, you should always use shielded phono cables.  There

are many high quality cables available today.  It is recommended that

you keep the length of cable as short as possible to avoid any

potential noise problems.

When using speaker level connections, use a high quality speaker

cable that mates well with the connectors.  Be very careful to avoid

any loose strands or frayed wires that may result in a short, which

may damage your equipment.  Cables of extremely large size are

typically not required. Extremely large gauge wire may not properly

fit in the binding posts, resulting in a poor connection and possible

short circuits.

Care of Your Subwoofer

Your Velodyne subwoofer does not require any regular maintenance.

Normal dusting or cleaning of the surface for appearance purposes

is all that is required.  We suggest you avoid any harsh detergents or

chemicals when cleaning the cabinet.  Abrasives, detergents, or

cleaning solutions may damage the finish on the cabinet.  We

recommend using only a damp cloth to clean the cabinet.

During normal conditions, your new subwoofer may be left on

continuously without any problems.  The unit is equipped with a

signal-sensing turn on/off that will automatically turn on the unit

when a signal is present at the inputs and turn off the unit after

several minutes when there is no longer any signal at the inputs.

Protection Circuitry

Your new subwoofer is equipped with circuitry to provide maximum

performance with greatest reliability.

The unit is protected against:

1) Overheating the amplifier.

2) Excessive drop in power line voltage.