Velp VORTEX Instruction Manual - page 11
Velp Scientifica – Vortex Mixer Wizard & Classic Manual
8
6. Accessories available on request
The following accessories can be ordered separately and are to be attached to the
apposite push-fit sede once the standard cup head supplied with the unit has been
removed.
To attach accessories, simply push gently until they lock into place.
Description: Code
Foam stand for 19 microvials 1.5 ml - Eppendorf
®
A00000012
Customizable soft foam top
A00000013
Foam stand 5 test tubes Ø16mm
A00000014
Foam stand for microtiter A00000015
Small rubber supporting plate Ø 50mm
A00000016
Big foam supporting plate Ø 94mm
A00000017*
*Accessory recommended only for the Classic version
A00000012
A00000013
A00000014
A00000015
A00000016
A00000017
WARNING
•
Do not exceed a speed of 800 rpm (microtiter) when the microtiter foam
stand is being used. High speeds may cause the sample to spill.
•
Do not exceed a speed of 1200 rpm when platforms are being used.
NOTE
With the Classic version remember to turn the side lever (TOUCH-
PLATFORM) to the PLATFORM position to optimise the unit’s performance.