Vemoco GPS device Installation Manual - page 6
Additional practical information
Troubleshooting
If you encounter difficulties using the product, please send us an email at
support@vemoco.com
and we
will be back to you within 24 hours. On weekdays you may also call us at 00 36 30 683 3168.
Operation of status LEDs
Status LEDs are located on the front side of the device below the blue sticker area:
Red LED:
Power ON/OFF signal. Slow blinking denotes
powered ON state and normal operating
conditions.
Amber LED:
Data connection status. Rapid blinking denotes an
ongoing GPRS connection procedure.
Slow
blinking denotes that the connection has been
successfully established.
Green LED:
GPS status. Rapid blinking denotes an ongoing GPS satellite acquisition procedure. Slow
blinking denotes that the satellite signals have successfully been acquired and they are
continuously received.