VENDAPIN VendaFax VF-1 Installation And Programming Manual

Manual is about: VENDAPIN VendaFax Installation and Programming Guide

Summary of VendaFax VF-1

  • Page 1

    Vendafax vf-1 installation and programming guide corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires street cortland, ny 13045 607-428-0627 parts list: 1 – #980006-001 - vendafax vf-2 controller – 1 ea 2 – # 500040-002 - velcro strips – 2 ea 3 – # ...

  • Page 2

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 if you purchased a vendapin 5596 series, please refer to the photo below for the recommended mounting location and orientation of the vendafax module. Please no...

  • Page 3: Wiring Specifications

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 wiring specifications : the power for the vendafax is +12~24vdc. The supplied harness has two wires (yellow and black) with a fork terminal already on them. The...

  • Page 4

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 if you purchased a vendapin 5596, simply connect the supplied harness to j-10 3-position and 2- position headers. See the photo below. All the electrical connec...

  • Page 5: Line Connections

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 pin 6 – count out (dc return) - red/white note: failure to follow the correct wiring as described above will result in serious damage and/or failure of the vend...

  • Page 6

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 now you are ready to make the connections to your fax machine. Connect the cable going out to your fax device to the “to fax” jack on the vendafax module. See t...

  • Page 7

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 photo sensor mode the vendafax vf-2 also has the capability to sense scanned pages for faxing by using a small photo sensor that is attached to the vendafax mod...

  • Page 8

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 the first step is to remove the glass of the scanner. Please refer to the copier owner’s manual for details. There are far too many copiers to show them all. Th...

  • Page 9

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 now the sensor cable must be routed inside the scanner so it does not bind or interfere with the normal motion of the light bar. In the case of the canon ir2880...

  • Page 10

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 the next step is to attach the sensor to the light bar. The sensor must he secured directly to the light for best results as well as reliability. The sensor mus...

  • Page 11: Programming

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 here is a photo of the sensor location on the samsung c8380nd. Use caution when installing the sensor so that it does not interfere with the normal operation of...

  • Page 12

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 most systems will use straight thru dial mode to send faxes. The dip switches as shown in the above photo are set to straight thru dial mode, normal operating m...

  • Page 13

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 3 – pick up the hand set of the touchtone phone connected to the vendafax module. Listen for 2 beeps on the speaker of the hand set generated by the vendafax mo...

  • Page 14

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 to test the system, scan a sheet of paper and watch the led on the front of the vendafax module. When the light bar is turned on, you should see the led blink a...

  • Page 15

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 basic operation of store and forward mode 1. When the host fax device comes off hook, it is connected to an artificial line within the vf-1 and the dial tone is...

  • Page 16

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 notice the material contained in this manual is subject to change without notice. No part of this manual may be reproduced or used in any form or by any means, ...

  • Page 17

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 if your unit is delivered to vendapin llc lacking proof of purchase, and we are unable to otherwise verify date of purchase, we will assume the purchase date of...

  • Page 18

    Corporate headquarter: 16381 cherokee road brooksville, florida 34601 352-796-2693 factory: 21b squires st. Cortland, ny 13045 607-428-0627 return authorizations all units returned to vendapin llc must be shipped with a return authorization number (ra#) affixed to the outside of the shipping contain...