Summary of VCG60S
Page 1
Cooktop vcg60s.
Page 2: 1800 444 357
Congratulations on purchasing your new venini product. It is important that you read through the following use and care manual thoroughly to familiarize yourself with the installation and operation requirements of your appliance to ensure optimum performance. Our customer care centre is there to ens...
Page 3
3 contents enviro nmental note 4 important safety information 5 – 7 specifications 8 – 9 electrical details 9 gas details 9 gas hob surface layout 9 using the gas hob 10 - 11 before first use 10 switching the hob on 10 energy saving tips 11 cleaning 12 - 13 cleaning the hob top 12 after each use 12 ...
Page 4
4 environmental note o the packaging materials that the manufacturer uses are environmentally friendly and can be recycled. O please discard all packaging material with due regard for the environment..
Page 5
5 important safety information your safety is of the utmost importance to the manufacturer. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the retailer wh...
Page 6
6 child safety o the manufacturer strongly recommends that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time.During and after use, all surfaces will be hot. O if it is necessary for younger family members to be in the kitchen,...
Page 7
7 cleaning o cleaning of the hob should be carried out on a regular basis. O important: before attempting to clean the appliance, it should be disconnected from the mains and cool. O great care should be taken whilst using this appliance and when following the cleaning procedure. O you should not us...
Page 8
8 specifications product dimensions: aperture dimensions: depth: 510 mm depth: 480 mm width: 600 mm width: 560 mm height: 40 mm product specifications: o 1 x 10.8 mj/h rapid burner o 2 x 6.3 mj/h semi-rapid burners o 1 x 3.6 mj/h auxiliary burner o front control operation o automatic ignition o enam...
Page 9
9 gas hob surface layout acg6s a = 10.8 mj/h rapid burner b = 6.3 mj/h semi-rapid burners c = 3.6 mj/h auxiliary burner d = control panel electrical details rated voltage: 220 - 240 vac 50 / 60 hz supply connection:3a max rated inputs: 0.0008 kw mains supply lead: 3 core x 0.75mm² (type rr-f marked)...
Page 10
10 using the gas hob before first use important: you should clean the hob surface (see “cleaning and maintenance” section). Switching the hob on the following symbols will appear on the control panel, next to each control knob: = gas off large flame: maximum setting small flame: minimum setting o th...
Page 11
11 o in case of power failure, the burners can be lit by carefully using a match. Energy saving tips burners pans minimum diameter maximum diameter wok 220 mm 260 mm rapid 180 mm 220 mm semi-rapid 120 mm 200 mm auxiliary 80 mm 160 mm o the diameter of the bottom of the pan should correspond to that ...
Page 12
12 cleaning cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the hob top any residues that are left on the hob top surface from cleaning agents willdamage it. You should rem...
Page 13
13 o after cleaning and washing them, wipe and dry them carefully. O before placing the burners back on the hob top, make sure that the gas jet is not blocked. O important: make sure that you reassemble the burners in the original way. Maintaining the enamelled pan stands o important: make sure that...
Page 14
14 positioning the adjacent furniture must be able to withstand a minimum temperature rise of 85°c above the ambient temperature of the room it is located in, during periods of use. * 600 mm o this appliance can be located in a kitchen, a kitchen diner or a bed sitting room. Important: the appliance...
Page 15
15 unpacking the appliance when unpacking the appliance please check that the following items are contained within the packaging: 1 x cooktop pan stands burner assemblies instruction manual warranty card fixing screws clamps sealing strip lpg conversion jets self-adhesive label for amending the gas ...
Page 16
16 o carefully turn the hob upside down and place it on a cushioned mat. O apply the sealing strip (a) provided around the edge of the appliance. O the protective covering must be removed from both sides. O do not leave a gap in the sealing agent or overlap the thickness. O important: do not use a s...
Page 17
17 gas connection this appliance must be installed by a competent person in accordance with the current standards. Important information o this hob is supplied to run on natural gas only and cannot be used on any other type of gas without modification. O conversion for use on lpg and other gases mus...
Page 18
18 ventilation requirements o the room containing the hob should have an air supply in accordance with the current edition of bs 5440: part 2: o the room must have opening windows or equivalent; some rooms may also require a permanent vent. O if the room has a volume between 5 and 10m³, it will requ...
Page 19
19 gas safety (installation and use) regulations important: the appliance must be connected to the gas supply by use of a 15 mm x ½” female coupler, seal, copper pipe and an isolation tap fitted in an easily accessible position. O it is the law that all gas appliances are installed by competent pers...
Page 20
20 gas adjustment (conversion to lpg) all work must be carried out by a registered gas fitter. Important: always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. O remove the pan-stands, burners and flame spreaders (a). O uns...
Page 21
21 minimum flow adjustment for hob gas taps. All work must be carried out by a registered gas fitter. Important: always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. O switch the burner on and set the knob at the minimum p...
Page 22
22 gas tap maintenance these maintenance operations must only be carried out by a registered gas fitter. . Important: before carrying out any maintenance operations, disconnect the appliance from the gas and electricity supplies. If a gas tap becomes stiff to operate, then you should proceed as foll...
Page 23
23 safety warnings.
Page 24
24 electrical connection this appliance must be installed by a qualified person in accordance with the latest edition of the as/nzs 3000 wiring regulations and in compliance with the manufacturer’s instructions. Warning ： ： ： ： 240 volts. Disconnect power before servicing unit before connecting the ...
Page 25
25.
Page 26
26 my appliance isn’t working correctly important: if your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the customer care department via the contact details on the back page. Do not attempt to repair the appliance yourself. Pl...
Page 27
27.
Page 28
Think appliances pty ltd. 416-424 barry rd coolaroo vic 3048 sales telephone 1300 132 824 service telephone 1800 444 357 website www.Thinkappliances.Com applico ltd. Private bag 92900 onehunga, auckland 1061, new zealand website www.Baumatic.Co.Nz united kingdom baumatic ltd., baumatic buildings, 6 ...