Summary of VECE6005
Page 1
Electric hobs user and installation instructions.
Page 2
Dear customer, congratulations on purchasing your new product from think appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out customer care team on: 1800 444 357 our customer care centre is there to ensu...
Page 3
For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found in the invoice: model number ……………………. Serial number ……………………. Date of purchase ……………………..
Page 4
Contents general information page 4 warning safety instructions page 5 instructions for use page 6---7 instructions for installation page 8--10 technical data page 11 3.
Page 5
General information please read this booklet thoroughly before you use this appliance. It is important that you understand all the control functions before commencing to cook with your venini appliance. Please remember the advice and warnings shown on page 5 which is headed ‘important – warning and ...
Page 6
Important note – warning and safety instructions this appliance complies with all current european and australian safety legislation, however venini do wish to emphasise that compliance does not remove the fact that surfaces will become hot during use and retain heat after operation. Venini advise t...
Page 7
Instructions for use these user instructions should be retained for future reference and for use by a person who is perhaps unfamiliar with the appliance. The following models are covered by these instructions: vsec vsec.2 vece6005 vece6008 using electric hotplates the symbol on the control panel fa...
Page 8
Warning • do not use commercial simmering aids as these can create excessive heat that can damage the appliance • do not leave hotplates on without a pan or an empty pan • be aware that hotplates will retain heat whilst cooling down • when cooking foods with high sugar content, ensure that any spill...
Page 9
Instructions for installation this appliance must be installed by a competent person in accordance with the current version of the following regulations and safety standards or your local regulations and safety standards. Venini installation instructions in australia the installation must comply wit...
Page 10
Installation notes 1 cut the aperture to the dimensions shown in the table below or use the template provided on the packaging. 2 invert the hob and apply the sealing agent provided to match the outer perimeter edge. 3 if the sealing agent is a strip type, the protective covering must be removed fro...
Page 11
Electrical connection this appliance must be installed by a competent person, such as one holding niceic registration and in accordance with the latest edition of the iee wiring regulations. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds wit...
Page 12
Technical data electrical details rated voltage: 2 4 0v ac 50hz supply connection: switched double-pole isolator with 3mm contact separation power inputs and protection rating model kw amp pr otection reting max total min fuse mains supply connection cable: 3 x 2,5mm2 type ho5 v2v2- f marked note: f...