Venini VEF61.1GG Installation Instructions User Instructions - Service Information
Service information
Service and maintenance must only be carried out by an authorised person
.
This appliance sh
ould
not be modified.
Always disconnect the gas supply and power before servicing the cooker.
After service always check connections for gas soundness
.
NEVER
use a naked flame to check for leaks.
To remove the upstand (for cookers fitted with upstand)
1. Pull
the
cooker forward
.
2. To remove the upstand retaining brackets undo the 2 top and 2 rear retaining
screws securing each bracket.
2. Lift the upstand from the cooker hob.
To clean or replace a cooktop burner injector
1. Remove
the
pan support, burner cap and burner head.
2. Using a 7mm socket spanner unscrew and clean or replace the cooktop burner's
injector.
3. Replace
the
burner head, cap and pan support. Ensure that the burner head and cap are
in the correct position.
To
cl
ean or replace the oven burner or in
j
ector
1. Drop down the warming compartment door.
2. Using a
P
hillips head screw driver remove
the
2 screws positioned centrally below
the
oven
surround panel at
the
front.
3. Pull
the
burner forward carefully to expose
the
oven injector.
4. Using a 7mm socket spanner unscrew and clean or replace the oven burner injector.
5. Reassemble in reverse order.
Access to the under hob area
Pull
the
cooker forwards to gain access to the rear of the cooker
.
1. Remove
the
upstand
.
2. Remove
the
pan supports, burner caps and burner heads
.
3. Using a torx T20 head driver remove the screws securing the burners to the hob. 2
per boiling burner and 4 for the wok burner.
4. Remove the lower 2 screws of each upstand bracket
.
5.
L
ift
the
hob at
the
rear and slide out of position.