1. DL manuals
  2. Venini
  3. Oven
  4. VEO9002
  5. User And Installation Instructions Manual

Venini VEO9002 User And Installation Instructions Manual

Manual is about: ELECTRIC SINGLE OVENS

Summary of VEO9002

  • Page 1

    Electric single ovens user and installation instructions.

  • Page 2: Serial Number

    For future reference please record the following information which be found on the rating plate and the date of purchase which can be found in the invoice: model number ……………………. Serial number ……………………. Date of purchase ……………………..

  • Page 3: Contents

    Contents general information page 3 warning and safety instructions page s 4-5 instructions for use pages 6-9 instructions for installation pages 1 0 - 1 2 technical data page 1 3.

  • Page 4

    Dear customer, congratulations on purchasing your new product from think appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out customer care team on: 1800 444 357 our customer care centre is there to ensu...

  • Page 5

    General information please read this booklet thoroughly before you use this appliance. It is important that you understand all the control functions before commencing to cook with your new appliance. Please remember the advice and warnings shown on page 5 which is headed ‘important – warning and saf...

  • Page 6: Important Note –

    Important note – warning and safety instructions this appliance complies with all current european safety legislation, however the producer do wish to emphasise that compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation. The produc...

  • Page 7

    Note: this appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. The producer declines any responsibility for injury or damage to persons or property as a result of improper use or installation of this appliance. Heat, stea...

  • Page 8

    User instructions instructions for use these user instructions should be retained for future reference and for use by a person who is perhaps unfamiliar with the appliance. The following models are covered by these instructions: veo9002 using the oven before your ovens first use it is suggested to d...

  • Page 9

    • keep the oven door closed when using the grill. • do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill – the high reflectivity of the foil can damage the grill element. • do not place aluminium foil or baking trays directly on to the base of the ...

  • Page 10

    8 120 minutes cut-off timer the function of the programming timer is to turn on the oven for a pre-determined amount of time. Operating: after having set the oven, switch knob at the desired temperature, turn the timer knob in a clockwise direction to the desired cooking time (max. 120 minutes). Whe...

  • Page 11

    Cleaning the appliance always allow the appliance to cool down before cleaning to avoid a burn injury. Do not use caustic or abrasive agents, coarse wire wool or hard tools as these can damage the surface finishes. Normally, wiping with a soft cloth dampened with hot detergent is sufficient, but for...

  • Page 12

    Installation instructions instructions for installation this appliance must be installed by a competent person, in accordance with the current version of the regulations and safety standards or your local regulations and safety standards: building regulations (issued by the department of environment...

  • Page 13

    Installation instructions electrical connection before connecting the appliance, make sure the supply voltage marked on the rating plate corresponds with the mains supply voltage. Warning – this appliance must be earthed this appliance should be wired into a 16a circuit ensuring compliance with as/n...

  • Page 14

    Installation instructions replacing the oven light (not covered by the appliance warranty) disconnect the appliance from the electricity supply, remove the oven door (as described previously) as well as the oven shelves. Remove the protective glass light-cover by twisting anti-clockwise. Unscrew the...

  • Page 15

    Technical data dimensions veo9002 height – 48 0 mm width – 8 9 8 mm depth – 56 3 mm electrical details rated voltage: 2 4 0v ~ 50hz max rated inputs: veo9002 : 2600 w mains supply lead: 3x 2.5mm ² type h05 rr-f har > oven light bulb: 25w/300 ° c screw type p y gmy 1 3.

  • Page 19

    C od . 12300065120